CPU ALWAYS OVERHEAT!!!!!!!!!!!!!

Phen8210

High Supremacy Member
Joined
Jul 29, 2011
Messages
29,031
Reaction score
8,284
MY Cpu temps are so high, the dust in my case builds up way too fast.. last cleaned 4months ago and now playing 5mins of ss4iv brings it up to 90 degree wtf?

I need a permanent solution to stop the dust from building up so fast.. i see some people don't even need to clean their PCs after few years of using.

And i have to do a mass cleaning of all the parts every 3-4months.. i srsly don't wanna waste my day on that.
 

tony_ong

Senior Member
Joined
Jun 2, 2005
Messages
1,589
Reaction score
0
the intake fans put dust filter lo.

at least tts how i do it.. till now still quite dust free. been at least 6 months.

i also using one output fan only.. but using those high flow de. with 3 intake fan

edit: all 3 intakes are filtered
 
Last edited:

torquegt

Junior Member
Joined
Mar 3, 2010
Messages
24
Reaction score
0
yep, filter-proof on all intakes and maybe check your airflow inside your casing to make sure it is optimum....:D
 

iKoori

Senior Member
Joined
May 23, 2013
Messages
524
Reaction score
0
TS if you looking for advice then spend money and purchase more fans for your rig. If you not willing to spend then you will have to clean it often which can be ideal for hardworking people who don't want to spend money on fans.
 

jarred1223

Arch-Supremacy Member
Joined
Jun 16, 2007
Messages
18,631
Reaction score
2
but i have no intake fan ._.

that's the main reason for dust build up.

if your case has only 1 x exhaust fan, this is negative air pressure. the exhaust fan will draw air from every possible open area (which will not have dust filter).

try getting 1 or 2 intake fan to intake air which go through a dust filter.
 

squeeish

Supremacy Member
Joined
Sep 1, 2003
Messages
6,777
Reaction score
5
Why doesn't TS take a look at the root cause of the problem, like checking if the heatsink is installed properly and/or the thermal paste was applied correctly.
 

NY__chickenpie

Supremacy Member
Joined
Nov 14, 2008
Messages
9,116
Reaction score
0
the case must have positive pressure, means inflow higher than outflow. Filter all the intake and cover all holes and opening to prevent dust from entering. My case 6 month havent clean and still not dusty.
 

ahbard

Arch-Supremacy Member
Joined
Jan 4, 2007
Messages
18,350
Reaction score
2,608
my casing think 2 years never clean liao.... just wash the filter every 6 mths or so.

Try not to put your casing on the floor and put in some intake fans. 2 intake : 1 exhuast.
 

Derwent Graphite

Master Member
Joined
Feb 11, 2009
Messages
3,740
Reaction score
0
the case must have positive pressure, means inflow higher than outflow. Filter all the intake and cover all holes and opening to prevent dust from entering. My case 6 month havent clean and still not dusty.

how to cover if using HAF 932 sia. Everywhere is hole
 

sharkapl

Master Member
Joined
Sep 8, 2006
Messages
4,862
Reaction score
0
ever consider removing cpu cooler, reapply thermal paste and clean the cooler?
 

Phen8210

High Supremacy Member
Joined
Jul 29, 2011
Messages
29,031
Reaction score
8,284
that's the main reason for dust build up.

if your case has only 1 x exhaust fan, this is negative air pressure. the exhaust fan will draw air from every possible open area (which will not have dust filter).

try getting 1 or 2 intake fan to intake air which go through a dust filter.
ok finally made sense haha, so i guess i'll get an intake fan on the front of my case.
 

Phen8210

High Supremacy Member
Joined
Jul 29, 2011
Messages
29,031
Reaction score
8,284
my casing think 2 years never clean liao.... just wash the filter every 6 mths or so.

Try not to put your casing on the floor and put in some intake fans. 2 intake : 1 exhuast.

My casing is on my desk, n yeah getting n intake fan.
 

Phen8210

High Supremacy Member
Joined
Jul 29, 2011
Messages
29,031
Reaction score
8,284
Why doesn't TS take a look at the root cause of the problem, like checking if the heatsink is installed properly and/or the thermal paste was applied correctly.

uh.. how does that stop does dust from building up in the case too fast?
But my problem is pretty obvious.. open casing can't even see the psu anymore :s13:
 
Last edited:
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top