CPU temperature difference?

sad_xiaoxin

Member
Joined
Aug 8, 2006
Messages
285
Reaction score
33
Anyone experience or know why the temperature difference when using itx case and mid tower case?

As I find it weird why when I'm using phanteks enthoo evolv itx case.. My cpu temperature is lower than using Tecware Vision mid tower case?

Both case have 2 intake and 1 exhaust. CPU Temperature difference of ~10c.

Isnt itx case suppose to be hotter due to smaller size?
 

singupingu

Supremacy Member
Joined
Jan 19, 2016
Messages
6,939
Reaction score
3
Airflow design dictate more than form factor in terms of overall temp performance. Evolv ITX is quite restrictive nonetheless, but airflow design better than Tecware Vision, where's its intake is more restrictive than the Evolv ITX.

Sent from OnePlus ONEPLUS A3003 using GAGT
 

sad_xiaoxin

Member
Joined
Aug 8, 2006
Messages
285
Reaction score
33
Really? Hmm.. Still can't believe it.. Evolv itx intake had a dust filter and I place and addition filters and using air pressure fan.. Tecware Vision basically no dust filters or anything.. Using air flow fan with max cfm of 83, there's side vent at the front. Unlike tecware void which virtually has no vent for intakes.. Really perplexing..

Airflow design dictate more than form factor in terms of overall temp performance. Evolv ITX is quite restrictive nonetheless, but airflow design better than Tecware Vision, where's its intake is more restrictive than the Evolv ITX.

Sent from OnePlus ONEPLUS A3003 using GAGT
 

singupingu

Supremacy Member
Joined
Jan 19, 2016
Messages
6,939
Reaction score
3
Really? Hmm.. Still can't believe it.. Evolv itx intake had a dust filter and I place and addition filters and using air pressure fan.. Tecware Vision basically no dust filters or anything.. Using air flow fan with max cfm of 83, there's side vent at the front. Unlike tecware void which virtually has no vent for intakes.. Really perplexing..
Maybe the airflow fan for intake is too weak? Also, amount go gap plays a part too. I'm using static pressure fans for NZXT S340 Elite, which also have restrictive intake, and my airflow is perfectly fine with acceptable temps, albeit I admit, come with a little bit of noise but I can live with that the moment I play something through the speaker and I can't hear my system anymore.

Try swapping the static pressure fans over to the vision and monitor the temps?

Sent from OnePlus ONEPLUS A3003 using GAGT
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top