Desktop Cannot On, Unsure Which Part Fail

bendwolf

Master Member
Joined
Jun 24, 2000
Messages
4,304
Reaction score
1
Symptoms
1. Motherboard got lights when PSU switch is on. Meaning as least passthrough power is supplied.
2. Press power switch on casing cannot turn on
3. Short power pins on mobo cannot on

PSU or Mobo fail? Anyone face such a situation before?

Trying to avoid buying parts not needed. No spares to test. Any ideas?
 

yusoffb01

Arch-Supremacy Member
Joined
Jun 17, 2008
Messages
16,814
Reaction score
1,769
seasonic is fail. get a better brand
 
Last edited:

KenQuek

Arch-Supremacy Member
Joined
Oct 7, 2000
Messages
12,488
Reaction score
1,209
Disconnect all parts from PSU then manually trigger on see how.

If don't know google, its easy.
 

bendwolf

Master Member
Joined
Jun 24, 2000
Messages
4,304
Reaction score
1
It manages to boot up after a while. Shutdown and fails again.

Managed to backup some data when it managed to start.

Out of 5 times trying to turn on, about 2 times will have no response to power button press. If it fails I go do other things and it somehow works after a couple of hours.

Success attempt = usually a single press to the power button works.
Fail attempt = when I press multiple times including shorting the power pins, trying for up to 2 mins.

My suspect (but cannot prove) so far is the mobo since it is about 6 years. Not casing button cos power pins shorting proved it as not the culprit. Likely not PSU as once powered on, no issues no sudden shutdown. Not other components as no POST error if can turn on.

I will continue to document my findings in case people faces the same problem in the future and can reference what was done.
 

bendwolf

Master Member
Joined
Jun 24, 2000
Messages
4,304
Reaction score
1
Also tried changing CMOS battery, does not fix the problem. BIOS clock and config remains intact, suggests that the battery is fine.
 

ZrE0_Cha0s

Arch-Supremacy Member
Joined
Jun 21, 2011
Messages
16,703
Reaction score
26
whats your mobo btw? is there nay LED bug lights? if have try to find the manual and look for their codes to know where parts have error.
 

bendwolf

Master Member
Joined
Jun 24, 2000
Messages
4,304
Reaction score
1
No error code, just cannot start. Once able to power on, everything ok.
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top