Error code 10. Can anyone advice?

[freakerknoid]

Hi guys, I need some adivce of what could be the cause of my issue.

My com was working normally when i shut off in the morning and went to work. When i came back try to turn on the comp, it wouldnt ever go pass bios but it struck with a blank screen with error code 10 and the fan was spinning.

Try reset the cmos the first time and its struck at b2 or 62 with a blank screen with a dash at the left top corner. Did a normally power off and on and a error code A3 try restarting again and it will struck at error code 10 and just hangs there with the fan spinning.

Things i did,

Took out the graphic card and use build in graphic.
Reset the ram and test each slot one at a time.

I have no idea what could be the problem , it my bios corrupted or my psu is faulty. I have a second bios but that was even worse it just show error code 26 then 36 and it would keep restarting......

 

[freakerknoid]

Any ideas?

 

[tungsten2]

Bring your motherboard back to the shop where you bought it.
Sometime they may be able to flash your bios.
Else sent it for RMA.

 

[Koenig168]

Since both of the BIOS are not working and you were getting all sorts of error codes, then it is likely that the MB is spoilt. Time to RMA.