FD Node 304 with AIO Cooler?

croc1977

Banned
Joined
Mar 30, 2002
Messages
46,244
Reaction score
2,208
ask you guys ...

i will pair with a 2200g i got for 2nd hand...

which motherboard should i go for?

1) Gigabyte B450i Auora ?
2) MSI B450i gaming plus ?

actually was aiming for msi but the nvme drive slot is on another side maybe a turn off?
 

soltrdc

Senior Member
Joined
Sep 27, 2004
Messages
779
Reaction score
251
ask you guys ...

i will pair with a 2200g i got for 2nd hand...

which motherboard should i go for?

1) Gigabyte B450i Auora ?
2) MSI B450i gaming plus ?

actually was aiming for msi but the nvme drive slot is on another side maybe a turn off?

No experience with either but if the MSI one has only one NVMe slot and it's on the back, I'd go for the Gigabyte one. NVMe drives can get hot also, and the Node 304 doesn't look like it'll have some space between the back of the mobo for the heat to dissipate? M.2 ssd on the front can also benefit somewhat from airflow cooling, especially if you use a C-type top flow cooler. Not to mention you won't need to remove the whole mobo just to access the drive, should there be need to change anything
 
Last edited:

croc1977

Banned
Joined
Mar 30, 2002
Messages
46,244
Reaction score
2,208
ok my parts almost complete

Order from Lazada today.

Gigabyte B450i Arous
Cosair CX450
Transend 128GB NVME

Cooler decide stock cooler from my old 2600
 

soltrdc

Senior Member
Joined
Sep 27, 2004
Messages
779
Reaction score
251
Congrats! Always nice to finish a build.. I'm finishing one myself, should be done today with delivery of some case fans..
 

tatose

Senior Member
Joined
Apr 18, 2008
Messages
1,009
Reaction score
112
ok my parts almost complete

Order from Lazada today.

Gigabyte B450i Arous
Cosair CX450
Transend 128GB NVME

Cooler decide stock cooler from my old 2600

Congrats, if you can use older chips, just use them.
 

croc1977

Banned
Joined
Mar 30, 2002
Messages
46,244
Reaction score
2,208
JRu5LAP.jpg


i got this part keep droping after trying to put a sata card ...any idea how to secure this part?

not stated in my manual ..
 

watzup_ken

High Supremacy Member
Joined
Nov 21, 2003
Messages
25,671
Reaction score
2,123
My take is that if you are looking at using this casing as a NAS, I don’t think you need a very high end CPU. So like you mentioned, you are likely going for a Ryzen 3 or 5 APU at best, so you should just get a good low profile cooler like the Scythe Big Shuriken 3, and that should be more than enough based on my experience. I’ve previously paired this cooler with my overclocked Ryzen 5 3400G and under gaming load, it ran in the 70s max while still whisper quiet.

And because you are using as NAS, you are most likely going to keep this running for 24/7 or long hours. Therefore, it is best to just stick to air cooling to minimise downtime/ points of failure. Fan spoil (which is quite unlikely), just change fan. CLC will have to be mindful of leaks, evaporation, pump and fan failure.
 

t258jgn

High Supremacy Member
Joined
Oct 11, 2008
Messages
45,267
Reaction score
740
Usually Gigabyte intel itx boards have 6x sata ports
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top