Forgot Windows Logon Password

3sniper

Member
Joined
Sep 3, 2009
Messages
218
Reaction score
94
I have a Avengers 11.6" AVR116T tablet but have forgottern the logon password when the tablet startup. I have tried pressing the F8 key repeatedly on startup to display the boot menu, pressing shift and power key simultaneously when restarting but to no avail. Any solution?
 

s7460597

Arch-Supremacy Member
Joined
May 31, 2002
Messages
16,168
Reaction score
819
Did you try?

https://support.microsoft.com/en-us/windows/change-or-reset-your-windows-password-8271d17c-9f9e-443f-835a-8318c8f68b9c
 

hwzlite

Master Member
Joined
Jan 27, 2007
Messages
3,071
Reaction score
3,215
How to boot to USB or SD? It has micro usb and sd ports. It does not power on to a 'normal'windows screen where there is a 'forgotten password' nor 'reset password'option.

Same procedure for Systems with a direct SD card slot can use an SD card to boot it too.

And you need to set BIOS to make it boot from SD card, more details at https://miloserdov.org/?p=4287
 
Last edited:

3sniper

Member
Joined
Sep 3, 2009
Messages
218
Reaction score
94
Same procedure for Systems with a direct SD card slot can use an SD card to boot it too.

And you need to set BIOS to make it boot from SD card, more details at https://miloserdov.org/?p=4287

I tried getting into BIOS/UEFI by pressing esc, del, F1- F12, vol+ and power button but the screen very quickly display the avengers and then followed by enter password so I am unable to set it to boot from usb/sd card. Any other way? This is the laptop https://www.youtube.com/watch?v=f7sxEvvkF5o
 

86technie

High Supremacy Member
Joined
Jun 8, 2006
Messages
40,422
Reaction score
5,988
I tried getting into BIOS/UEFI by pressing esc, del, F1- F12, vol+ and power button but the screen very quickly display the avengers and then followed by enter password so I am unable to set it to boot from usb/sd card. Any other way? This is the laptop https://www.youtube.com/watch?v=f7sxEvvkF5o

- At the Windows login screen.
Press and hold the shift key than click restart PC at the power button icon.
You should be able to enter the Windows recovery screen.

best-ways-access-windows-10-boot.jpg


- Go to troubleshoot, select UEFI firmware settings.
If there are no UEFI settings than use a USB drive.

- Under UEFI firmware settings, select CSM mode as well as
check if Boot key menu F12 is enabled.

Once CSM mode is enabled, press F12 and the USB drive can be booted.
*After Windows is installed, remember to load BIOS defaults to disabled CSM mode.
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top