FSP Aurum 550w Platinium

chunjian89

Member
Joined
Jun 15, 2012
Messages
270
Reaction score
0
Anyone experiencing intermittent buzzing sound from this PSU?

I was using Seasonic for all my previous system all no sounds leh... This one keep giving out intermittent buzzing like got housefly stuck inside.

Exchange with my supplier already but still same... Is the normal?

:s11::s11::s11:
 

chunjian89

Member
Joined
Jun 15, 2012
Messages
270
Reaction score
0
Not sure leh... Cause is intermittent.

Notice that during cpu high load the buzzing sounds would be louder.
 

Warlock86

Senior Member
Joined
Sep 25, 2001
Messages
1,900
Reaction score
0
I had the same problem a year back and went back to PC theme to change a new one. After which, no problem since then.
 

chunjian89

Member
Joined
Jun 15, 2012
Messages
270
Reaction score
0
Just exchange with my supplier. Not as loud but still giving out noise.

Would this happens if overload?
 

dinosau4

Senior Member
Joined
Mar 16, 2009
Messages
613
Reaction score
0
Unless your PSU is rated silent i think a slight noise is more than tolerable, hehe..
 

chunjian89

Member
Joined
Jun 15, 2012
Messages
270
Reaction score
0
Ya loh... After exchange still giving out noise.. Think should be OK bah.

Thanks for the advice :)
 

chunjian89

Member
Joined
Jun 15, 2012
Messages
270
Reaction score
0
Very weird mah.. First time get this kinda PSU. As and when it like will start buzzzzzzz. After awhile stop then comes back again Lol.
 

MoneyFace =p

High Supremacy Member
Joined
Dec 17, 2010
Messages
35,380
Reaction score
402
Very weird mah.. First time get this kinda PSU. As and when it like will start buzzzzzzz. After awhile stop then comes back again Lol.
Just some info... This also happens to Seasonic which you can refer to the link in the quote below:

Ever wonder why such issues never happened in the older days?

Yes, every inductor (coil) and transformer resonate during operation and thus emit unavoidable vibrating/whining noises as a result.

In the older days, manufacturer will hold/strenghtened the coil/transformer using non-conductive wax/glue to prevent them from vibrating. But none use them nowadays due to high labour cost because waxing/glue are manual works, you can't automate this kind of operation.
 

chunjian89

Member
Joined
Jun 15, 2012
Messages
270
Reaction score
0
Think I would let it moan as much as it wants hehe.. Dont wanna void the good 7 years warranty :D
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top