[GFX] Video card spoil?

[我猜我猜我猜猜猜]

I update my driver then blue screen popup, before blue screen when i watch some video online will lag at time i cant switch on my pc

Update 1
I might be wrong

software that i try to update in my new pc

Update2
RST service working

If really graphic card spoil what type of graphic card can i buy? my budget $400

 

[Alternative X]

Restart into Safe Mode with Networking Support, download Device Driver Uninstaller and a copy of the previous stable version of your display drivers. Run DDU to purge new drivers and reinstall previous stable version of your display drivers.

 

[我猜我猜我猜猜猜]

Restart into Safe Mode with Networking Support, download Device Driver Uninstaller and a copy of the previous stable version of your display drivers. Run DDU to purge new drivers and reinstall previous stable version of your display drivers.

i got this feeling not software problem

 

[Alternative X]

Download and run BlueScreenView to see what system processes are causing the BSOD.

 

[我猜我猜我猜猜猜]

Download and run BlueScreenView to see what system processes are causing the BSOD.

Now my pc cannot switch on


Power up with a click sound then power down >Power up with a click sound then power down >Power up with a click sound then power down ~


I Google search all different answer some claim psu faulty/mob/ram/processor

 

[Alternative X]

Got any spare PSU?

 

[我猜我猜我猜猜猜]

Got any spare PSU?

Tested same problem

Got one time I tried playing with the motherboard reset pin(3 pin but I only cover 1 pin) my pc manage to boot up, when I switch off my pc I place the pin back (cover 2 pin) and try switching my pc back on my pc can't switch on(my mouse have light then faded) so I try the switching of the reset pin my pc can switch on but in loop boot up boot down

 

[Alternative X]

Is the CMOS reset jumper in the correct position?

Also, try reseating your RAM.

Your system got any beep sound or not? If not, can assume that you are stuck in a boot loop.

 

[我猜我猜我猜猜猜]

Is the CMOS reset jumper in the correct position?

Also, try reseating your RAM.

Your system got any beep sound or not? If not, can assume that you are stuck in a boot loop.

Cmos position correct
Ram resit and clean (eraser)
No beep only tick sound should be normal

 

[Alternative X]

Try resitting all your wire connections. Check for any metal parts under the mobo.

If that fails, best to take out your parts and slowly troubleshoot.

 

[我猜我猜我猜猜猜]

Latest problem I remove the reset pin my pc boot up and boot down but when I place back the pin my pc don't have power.

 

[Alternative X]

If the system has no power, the CMOS jumper is in reset position. Shift the cover to cover the middle pin and the previously uncovered pin.

 

[我猜我猜我猜猜猜]

If the system has no power, the CMOS jumper is in reset position. Shift the cover to cover the middle pin and the previously uncovered pin.

No uses,

1.Pc boot up monitor light blinks (fan spinning)
2.Reboot loop


now I realise when my in loops I switch off the power my pc boot up for 1 sec


Could it be the mob faulty

 

[我猜我猜我猜猜猜]

Mouse and usd light are on but pc can't switch on

 

[Alternative X]

Is your CPU cooler dusty in any way? (Possible CPU overheat issue.)

 

[我猜我猜我猜猜猜]

Is your CPU cooler dusty in any way? (Possible CPU overheat issue.)

Thin layer of dust on the metal blade thingy

 

[Alternative X]

OK, disconnect everything from the mobo and remove all parts from the casing, leaving a barebones setup consisting of mobo+CPU+CPU cooler+PSU.

Do not insert any RAM, remove GPU as well. (Think should also remove mobo and put mobo on newspaper/wooden/plastic furniture, up to you.)

Keep the casing front panel connections to the mobo, you will need the switch. Try switching on the system and see if got any beep.

 

[我猜我猜我猜猜猜]

OK, disconnect everything from the mobo and remove all parts from the casing, leaving a barebones setup consisting of mobo+CPU+CPU cooler+PSU.

Do not insert any RAM, remove GPU as well. (Think should also remove mobo and put mobo on newspaper/wooden/plastic furniture, up to you.)

Keep the casing front panel connections to the mobo, you will need the switch. Try switching on the system and see if got any beep.

I remove gpu and ram pc boot up and boot down still reboot

 

[Alternative X]

I remove gpu and ram pc boot up and boot down still reboot

So, even with the barebones setup, you are still getting a reboot loop?

 

[我猜我猜我猜猜猜]

So, even with the barebones setup, you are still getting a reboot loop?

Sadly yes only cpu fan mob and psu