Google Pixel 6a

Which would you rather keep: the camera or the chip?

  • 50MP Samsung GN1 sensor

    Votes: 29 44.6%

  • Tensor GS101 SoC

    Votes: 36 55.4%
  • Total voters
    65
R

ranmaru1987

Senior Member
Joined
May 13, 2012
Messages
2,401
Reaction score
803
Yongkit said:
Hahaha like KeYoKe said there gap at the corner are you still interested?
I am the follow case $14.90 from challenger
screenshot_20220811-224829-png.33187
Click to expand...

I am using the same case as you.. your case the back will stick to the phone causing like water bubble effect?
 
Yongkit

Yongkit

Supremacy Member
Joined
Oct 9, 2015
Messages
5,866
Reaction score
2,475
Advancer said:
Oh the white gaps are air gaps?
I thought bro Keyoke was referring to the gap between the glass and casing.
In that case I shall look for film protector. Thank you.
Click to expand...
It is more obvious also due to glass nature of the thickness too.

At the price I got it for 3 pcs really have no concern for me;)

together with this case I used when I swipe at each angle I do not feel the gap that would be stop gap experience.

My past experience with some TG on my other budget phone was it could be fit but might experience the blocked sensations over the fingers when swiping even with case intact.
 
A

azarel

Master Member
Joined
Nov 6, 2000
Messages
2,658
Reaction score
47
Yongkit said:
Wow you really got sharp eyes (y)

:ROFLMAO: yes there are slightly white gap at each corner about 1mm due to the 6a have slightly curve edge, I believe film protector you used should be able to close the gap better.

My current experience this TG the scrolling experience is better and and the clarity vibrancy is slightly better too.
Click to expand...
haha film also not good tbh in fitting wise- had problems with both spigen slim case and otterbox case.... give up liao removed the film and just use naked for the time being..
 
J

jtec14

Supremacy Member
Joined
Dec 5, 2001
Messages
8,957
Reaction score
662
FYI in case anyone ordering, tried the below as the nillkin one have 1 corner seems can't stick on (probably manufacturing issue) but not that obvious.

https://s.lazada.sg/s.0l3uv
Have halo effects all round and seller provided the liquid to remove the effects which I don't like applying, so teared off and apply back the old nillkin, looked like currently only nillkin one quite suitable.

My case is from this seller, he have tgsp as well which he said fit quite well. (I did not get it from him since I got mine already). If anyone interested.

https://shopee.sg/-SG-HOT-Seller-Go...ad&xptdk=087468fb-02da-48b8-b31d-0823d8e8c5ad
 
J

jtec14

Supremacy Member
Joined
Dec 5, 2001
Messages
8,957
Reaction score
662
KeYoKe said:
Hahaha things like that affects my viewing experience. Although it isnt that obvious when screen lights up. But still it is visible on white/bright colored backgrounds.

Yup, TG smoothness and clarity is better then film. I still prefer TG overall, just need find a better one. Waiting for ibywind to release 1 for pixel 6a
Click to expand...
Was checking around ibywind also, look like nothing as of now. Remember to review here if ibywind come out with 1 and you got it. Thanks.
 
KeYoKe

KeYoKe

High Supremacy Member
HWZ Insider
Joined
Jul 14, 2005
Messages
37,545
Reaction score
9,635
jtec14 said:
Was checking around ibywind also, look like nothing as of now. Remember to review here if ibywind come out with 1 and you got it. Thanks.
Click to expand...
Yup definitely will. Waiting for them to release. Nothing as of now. Im using film atm... Tong a bit first
 
You must log in or register to reply here.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top