GPU repair

yiron

High Supremacy Member
Joined
May 21, 2003
Messages
25,078
Reaction score
2,418
Hi guys!

My Sapphire HD7850 DDR5 2GB OC recently died on me after 4 years. There were lines and artifacts at login, and entire screen turned blue (not BSOD) when I proceeded to login (could bootup and login to windows in safe mode, though there are still some lines here and there).

Would it be possible to repair it at a marginal cost (<$50)? Not quite keen on doing up a new rig at the moment due to personal circumstances :o

Would be grateful if anyone could recommend repair services :)
Seems like many people recommend Nigel's place at SLS 2nd fl - does he provide repair services for GPU?

Thanks in advance!

dgrkic.jpg
 

yiron

High Supremacy Member
Joined
May 21, 2003
Messages
25,078
Reaction score
2,418
Thanks for the advice everyone!

Will consider getting a new GPU then.

Am eyeing the SAPPHIRE NITRO RX 460 4GB D5 @ $172 if I do decide to get a brand new card.

For the powercolor HD 7950 3GB DDR5 Boost state, would a 520W PSU be enough to support it?
 
Last edited:

LiLAsN

Master Member
Joined
Dec 14, 2008
Messages
2,700
Reaction score
510
If you have actually tried calling or going down to an IT repair shop for even assessing the PC, it is way more than $50.
Save the money and get yourself a GTX 1050. Way more powerful than your current GPU at around the same actual price of getting your GPU repaired.
 

yiron

High Supremacy Member
Joined
May 21, 2003
Messages
25,078
Reaction score
2,418
No lah. I think he meant throw inside oven and record the circuilt board and the entire component melting and then post it on YouTube to get money to pay for his next GPU. :s13:

:s13: :s13: will certainly post here if I do decide to try that!
 

wwenze

Greater Supremacy Member
Joined
Dec 2, 2002
Messages
86,490
Reaction score
30,169
The circuit board won't even withstand the temperature at solder melting point.

No lah. I think he meant throw inside oven and record the circuilt board and the entire component melting and then post it on YouTube to get money to pay for his next GPU. :s13:

This method is actually well-proven.

https://www.ifixit.com/Guide/Tempor...raphics+card+by+heating+it+up+in+an+oven/2240
http://lifehacker.com/5823227/save-dying-video-cards-with-a-quick-bake-in-the-oven
http://www.addictivetips.com/hardware/fix-your-graphics-card-by-baking-in-oven/
http://www.instructables.com/id/How-to-repair-your-Graphics-Card-by-baking-it/

https://en.wikipedia.org/wiki/Reflow_soldering
FYI, your GPU and motherboards and SSD and stuff are all assembled this way. Temperatures over 250 Celsius are common, and the components are often spec'ed to survive more than 1 reflow.
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top