[HELP] Desktop caught fire after turning it on

Freakso999

Junior Member
Joined
Jun 10, 2004
Messages
73
Reaction score
0
Hi guys,

After I finished self-assembling my desktop, I turned it on and to my shock, a fire started at the bottom part of the hard drive bay.

Quickly turned power off and discovered one of my hard drive fried.

xtyhWZc.jpg


Also, since there's a backplane connecting several drives together, is it safe to say the entire backplane is kaput? Do I have to get a new casing?

NqEW0BM.jpg


Lastly, will eternal asia accept the burnt drive for RMA?

Thanks.
 

Humster

Arch-Supremacy Member
Joined
Jul 15, 2000
Messages
23,484
Reaction score
2,644
Whats your PSU? It is like a sudden surge of current fried your HDD...

Can you power on your computer again or everything is dead?
 

watzup_ken

High Supremacy Member
Joined
Nov 21, 2003
Messages
25,670
Reaction score
2,123
Best to check the other parts in your comp too. What PSU are you using and did you use any Molex to SATA power adapter for this drive?
 

Freakso999

Junior Member
Joined
Jun 10, 2004
Messages
73
Reaction score
0
PSU is Corsair CX600M, still able to power on and boot into BIOS. However, only 3 of the 6 drives are detected. Tried switching the power/sata cables around, no luck.

Are the other drives spoilt too?
 

squeeish

Supremacy Member
Joined
Sep 1, 2003
Messages
6,777
Reaction score
5
I suppose the fault lies with the backplane thingy? The ironic "QC OK" sticker is right there in the middle of your picture..
 

Freakso999

Junior Member
Joined
Jun 10, 2004
Messages
73
Reaction score
0
I suppose the fault lies with the backplane thingy? The ironic "QC OK" sticker is right there in the middle of your picture..

Yeah, I removed that thing and connected the cables directly to the drives. Suspect that the other 3 drives are gone too....tried a different drive and it's able to be detected in BIOS.
 

octacon

Supremacy Member
Joined
Jan 1, 2000
Messages
5,021
Reaction score
3
I suppose the fault lies with the backplane thingy? The ironic "QC OK" sticker is right there in the middle of your picture..

Ya , it happened to my Vantec harddisk docking as well. The backplane went up in smoke but my harddisk is safe.
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top