Help : Installation of Windows 7

[croc1977]

ok guys...
problem should be resolve...

disable a drive in bios plus resit ram...

cos previous owner install ram in slot 3 n4 ...should be 1 n 3 or 2 n4...

but question :

anything to disable? or i should change?

what is gsata? what is esp?

anyone>?????

 

[croc1977]

anyone................

 

[peterchan75]

GSATA = gigabit SATA. Normally, GSATA has different colour SATA connector. Just leave it enable. Connect any storage device that supports gigabit SATA to it.

 

[croc1977]

GSATA = gigabit SATA. Normally, GSATA has different colour SATA connector. Just leave it enable. Connect any storage device that supports gigabit SATA to it.

so my setting on my bios is it correct?

 

[croc1977]

please advice guys....

 

[peterchan75]

If your LiteOn DVD drive is IDE, then you need to enable DMA. Go to device manager > IDE ATA/Atapi controller > Primary IDE channel > change PIO only to DMA if available. Just google "How to enable DMA" for detail. SATA drives don't need to do this.

 

[croc1977]

If your LiteOn DVD drive is IDE, then you need to enable DMA. Go to device manager > IDE ATA/Atapi controller > Primary IDE channel > change PIO only to DMA if available. Just google "How to enable DMA" for detail. SATA drives don't need to do this.

my lite on drive is sata and all my drives are sata

so anything to enable or disable?

 

[ahwei91]

connect all your drives to blue sata ports ...... don't use the white ones .....

if nothing connected to the white sata ports and ide ports and esata ports, can disable the onboard gsata/ide controller and esata controller in bios .....

 

[ahwei91]

you are not using the white sata ports, right ?????

Onboard GSATA/IDE Ctrl and Onboard ESATA controller .....
change the Enabled to Disabled ?????
by right, it's not going to affect anything by disabling them though ..... but I like to disable features not in use .....

 

[peterchan75]

If that doesn't work then try reinstall the AMD SATA AHCI driver.
GIGABYTE - Motherboard - Socket AM3+ - GA-890FXA-UD5 (rev. 3.1)
Make sure you download the correct Windows 7 drivers i.e. 32 or 64bits.

 

[ahwei91]

If that doesn't work then try reinstall the AMD SATA AHCI driver.
GIGABYTE - Motherboard - Socket AM3+ - GA-890FXA-UD5 (rev. 3.1)
Make sure you download the correct Windows 7 drivers i.e. 32 or 64bits.

I think you need to read his problems again ..... he is trying to find out the cause of his slow installation of windows, not after installing windows .....

 

[croc1977]

I think you need to read his problems again ..... he is trying to find out the cause of his slow installation of windows, not after installing windows .....

correcto...