[Help] MSI mPower Board don't boot with A2/A0 code

[gaoxing84]

any pros here can help? can't seem to figure out

I started my PC but the mobo debugs and stall at A2/A0
no bios, no splash screen, can't seem to boot.
use bios switch to switch to second bios also cannot.
switch to other set of rams also cannot.
unplug my ssd and try to boot only with the OS ssd also cannot.
try to clear CMOS also cannot.

means mobo gg? need RMA?
if yes sian half, need to drain the entire loop

 

[royfrosty]

A2 is not the mobo, high chance one of your drive is failing. Might wanna pull out every single drive including optical drive (if any) and try boot.

 

[gaoxing84]

I think likely is RAM issue. i already had ram issue therefore running on one stick.
i tried using other RAM, works fine.

let me try to RMA ram and see how it goes. haha sian to drain everything

thanks roy!

 

[trenzterra]

Check if your RAM is mounted properly. My current MSI mobo, if the RAM is mounted too tightly, it won't boot up as well. It must be mounted at 'just nice' pressure, not too loose, not too tight.

However for my RAM issue mine got stuck at C6 or something, definitely not A2...

For my mobo A2 means the mobo is able to boot liao... not sure yours why like that.

 

[Firegear]

Check cpu or ram, msi MPOWER board very strong one le, I using for 3 year already still good le

Sent from Samsung SM-N910G using GAGT

 

[gaoxing84]

Lol really is ram lol. Rma my ram can liao. Lol

With new ram see can push the ram clocks higher for fun. Lol

Thanks guys!

Ya usually A2 means can alr. I think the ram got issue then gpu kena affected. That's why no screen.