Help new build

[mascot1993]

I finished building my computer, i turned on then it boots up, then i off, move to other location and now when i turn on the cpu fan just spin awhile and stop, nothings happen , led is there, press start but nothing happen, any idea???

 

[ivanykx1]

I finished building my computer, i turned on then it boots up, then i off, move to other location and now when i turn on the cpu fan just spin awhile and stop, nothings happen , led is there, press start but nothing happen, any idea???

Check the interior to see if anything came loose?

 

[mascot1993]

One of my ram is faulty, i was able to open it after keep on trying, i installed windows too, now i shutoff and it happens again, can it be the ram fault?

 

[Alternative X]

List down the parts of your rig. Reseat all wired, RAM, PCI-E connections in your system.

 

[mascot1993]

Hi, i keep trying, even unplugged one of the 4pin atx on my maximus vii formula. My mobo have 8 and 4pin, do i need to plug in both?

 

[Alternative X]

Hi, i keep trying, even unplugged one of the 4pin atx on my maximus vii formula. My mobo have 8 and 4pin, do i need to plug in both?

The 4 pin is there to give more power to the CPU during extreme OCing and is optional. The 8-pin is for the main power.

Got spare PSU?

 

[shadow84]

Did u mixed up the gpu 6+2 pin with cpu 4+4 pin?

 

[Alternative X]

Did u mixed up the gpu 6+2 pin with cpu 4+4 pin?

Don't think so, TS did manage to install Windows before this issue came up again. Not sure if it is PSU or mobo, so I am asking if got spare PSU.

Think TS already tried reseating the cables.

 

[mascot1993]

Don't think so, TS did manage to install Windows before this issue came up again. Not sure if it is PSU or mobo, so I am asking if got spare PSU.

Think TS already tried reseating the cables.

hmm, now the problem seem to be dissapear after i remove the 4pin atx. haha, i still can differentiate the cable..my first time building tho one of the ram cant be detected, think it is DOA

 

[Alternative X]

hmm, now the problem seem to be dissapear after i remove the 4pin atx. haha, i still can differentiate the cable..my first time building tho one of the ram cant be detected, think it is DOA

Can download and run Memtest 86+ to make sure the RAM is DOA.

 

[mascot1993]

Can download and run Memtest 86+ to make sure the RAM is DOA.

but it only detect 8gb out of 16gb, even in bios only show 8gb.. isnt it confirm dead?

 

[mascot1993]

Hi guys, went to exchange but the guy who tested my ram can detect both ram without problem. What could be the problem? I tested individually the ram and only one will have display while the other one dont..

 

[Alternative X]

Insert RAM into other RAM slots?

Got spare RAM? Doesn't matter if it has to come from another rig, as long as it is DDR3 RAM.