Help on onboard HDMI

[Thehim]

Setup as per such

ASrock A75m-hvs
AMD FM1 A4-3400
8GB ram
Primary HDD (164GB) 
3 Storage HDDs

I would like to know if anyone has a similar build to mine,
I've tried alot of ways trying to get the HDMI to work but its futile.
Previously it was

Biostar TA75m+
AMD FM1 A6 3500

It was working, until i switched it out.
I tried installing Windows and linux, but to no avail.

Onboard VGA works only.
I'm plugging this setup to [url="http://www.denonsingapore.com/sg/product/pages/Product-Detail.aspx?Catid=20ea224d-25b8-4cb0-bff0-e17b72b04593&SubId=b317010e-18ac-4dee-ab7a-5d374a9c8050&ProductId=AVR-1312#.UWanHpNkMZk] Denon AVR 1312[/url] (theatre) then to the PC.

I even tried using HDMI straight from TV to PC, but nothing.

Using AMD Catalyst program, with the latest driver.

 

[lee-turbo]

It should have signal even wo driver installed
Swap any cable around ?
No driver maybe run at lower reso only
or bios disable igpu ?

 

[MacClipper]

ime, HDMI can be troublesome, I had experienced severe totally unusable flickering with the wrong version of HDMI cables.

 

[Thehim]

It should have signal even wo driver installed
Swap any cable around ?
No driver maybe run at lower reso only
or bios disable igpu ?

That's the problem, no signal shows on my TV after connecting.
On AMD Catalyst, only show my VGA monitor.

ime, HDMI can be troublesome, I had experienced severe totally unusable flickering with the wrong version of HDMI cables.

No choice, I'm connecting this to my TV.
Just make full use of the HDMI, instead of plugging in another set of speakers.

 

[Thehim]

Mods can close thread.
Problem with HDMI cable, sadly had to try quite a few.

 

[MacClipper]

Yeah, as said previously HDMI cable matching can be troublesome sometimes.