I changed from a Pentium build to a Gigabyte AB350M-DS3H (2000 series ready) and a 2600. Everything else was the same, so they are working. Upon starting,
Motherboard lights up,
Case fan and CPU fan spins,
GPU lights up (Sapphire Nitro OC RX480 4GB),
Monitor shows no display (no signal)
I also tried changing the position of the RAM stick and changing from SSD to HDD (only one drive is connected at any one time).
How can I troubleshoot this? If it is a faulty CPU I received, how do I go about troubleshooting to know it's the CPU that is the problem? Other than that, what else can I try?
Advice would be greatly appreciated, thank you
Also I have a Mobo speaker attached at the front panel connectors but it's not making any sounds at all... Not sure if it's faulty or there really is no issue and hence no sound
Sent from OnePlus ONEPLUS A6000 using GAGT
Motherboard lights up,
Case fan and CPU fan spins,
GPU lights up (Sapphire Nitro OC RX480 4GB),
Monitor shows no display (no signal)
I also tried changing the position of the RAM stick and changing from SSD to HDD (only one drive is connected at any one time).
How can I troubleshoot this? If it is a faulty CPU I received, how do I go about troubleshooting to know it's the CPU that is the problem? Other than that, what else can I try?
Advice would be greatly appreciated, thank you
Also I have a Mobo speaker attached at the front panel connectors but it's not making any sounds at all... Not sure if it's faulty or there really is no issue and hence no sound
Sent from OnePlus ONEPLUS A6000 using GAGT
