Installing a 3.5" HDD into Tecware Nexus M casing

[orange_20]

Hi ppl

Is there a way to install a 3.5" HDD into a nexus M casing?

I can install it where the manual says it should be but I won't be able to connect the SATA and power cable properly.

need help!

 

[xonix]

Hi ppl

Is there a way to install a 3.5" HDD into a nexus M casing?

I can install it where the manual says it should be but I won't be able to connect the SATA and power cable properly.

need help!

Video Link: https://youtu.be/wwpjkngClzo?t=3m24s

Mounted near the PSU, definitely require cables with straight and slim connectors.

 

[orange_20]

Video Link: https://youtu.be/wwpjkngClzo?t=3m24s

Mounted near the PSU, definitely require cables with straight and slim connectors.

thanks! it's really a tight fit and I have to run cables under the HDD (between the HDD and case).

 

[merriman]

I mount it hanging upside down beneath the psu shroud, screws tightened from the top of psu shroud.. Not sure if it's correct or ideal, but seems so from the instruction manual

Hi ppl

Is there a way to install a 3.5" HDD into a nexus M casing?

I can install it where the manual says it should be but I won't be able to connect the SATA and power cable properly.

need help!

 

[orange_20]

I mounted it at the bottom but my power and sata cable can barely connect. really a tight fit.

I mount it hanging upside down beneath the psu shroud, screws tightened from the top of psu shroud.. Not sure if it's correct or ideal, but seems so from the instruction manual

 

[_DeS__]

Can 1. Just bend the power and sata cable to a L shape.