iPhone 6/6+ Screen Protectors

[HW_FAN]

I went to nubox to try the Spigen GLAS.t Slim and the staff was kind enough to open few to paste, seem all got the same 'oversize' issue. (the white gap is at right top area)

Later he also took some other brand to paste which both left and right side also got the gap.

Guess I am going to find the old batch sp which is slightly smaller.

Sorry do not quite get what white gap u talking about??
Possible to explain or show photos for better understanding.
Also u had tried a lot of glass sp but any of those tried are full coverage or claimed to be full coverage??
Like the following
Benks
Aegis
Core curved
ITG max
Iloome
Imoshi visor

You mean the brand with the right measurement? But I've tried many brands from different store. All same problem. Can advise on which page for this issue?

 

[gohyuelun]

???
U mean the shipping will cost u another piece of the glass?? Fyi I had factor in the shipping when I say double the price.
MIME is only selling at $29.9 usd, ITG max is $89 or $99 sgd . Please do your own math. Even core curved shipped from jap also cheaper than ITG MAX.

ITG is more famous.

 

[nisekin]

ITG is more famous.

you go buy your own famous glass we buy our non famous cheaper but works the same glass ok

 

[hawkz02]

ITG is more famous.

Never mind. I shall stop here.
U do not even know what you talking or what u want. One moment this another that.
Fyi a good glass protector is not brand.
It about the quality(like the coating),protection, coverage and also the price.
U can go with your "best".

 

[gohyuelun]

you go buy your own famous glass we buy our non famous cheaper but works the same glass ok

which brand works the same?

 

[gohyuelun]

Never mind. I shall stop here.
U do not even know what you talking or what u want. One moment this another that.
Fyi a good glass protector is not brand.
It about the quality(like the coating),protection, coverage and also the price.
U can go with your "best".

i am just kidding only.

 

[hawkz02]

actually all the glasses are the same coming from the same factory in china. just change packaging and you guys go crazy about it.

We know that but not all from the same factory.
There different factory in China with different mold also.
Also for those branded like spigen, ITG, imoshi, iloome all these cannot be easily get from those China factory . if not get for me aegis even it is mic. That I even enquired with my China counterpart to search for it and he cannot get within his area but those u selling one easily.

 

[bryanzzz]

So there wont be any screen film that covers the edge also?

 

[hawkz02]

Great hope you like it! Please recommend your friends to me.

I will be manufacturing my own brand and product soon. So please support our Singapore brand. Thanks!

Also when u mention this I knew that a lot of Bros here know what u talking about. Singapore brand?? as in bringing China glass with your own packaging only. The most u doing is tell the factory what u want and they try to do it for you if u order in large quantities.
Manufacturing?? Please faster. If you can produce a full glass and even we knew it from China same factory we still will buy as long it is what we want at a reasonable price. Not throat cutting price.

 

[hawkz02]

So there wont be any screen film that covers the edge also?

There is.
Bse and spigen flex is two of the brand I know of. Rest I cannot assure.
Spigen done it before for s3 so they should be about to reproduce the same result however now iphone 6 is all 4 side instead of s3 top and bottom only. Maybe that the reason for wet application as compare to dry for s3.

 

[p0mp0m]

There is.
Bse and spigen flex is two of the brand I know of. Rest I cannot assure.
Spigen done it before for s3 so they should be about to reproduce the same result however now iphone 6 is all 4 side instead of s3 top and bottom only. Maybe that the reason for wet application as compare to dry for s3.

Covers the edge = no gap at the corner?

 

[hawkz02]

Covers the edge = no gap at the corner?

Spigen flex I cannot confirm on the coverage but bse not case optimize one cover to the edge. No gap

 

[bryanzzz]

There is.
Bse and spigen flex is two of the brand I know of. Rest I cannot assure.
Spigen done it before for s3 so they should be about to reproduce the same result however now iphone 6 is all 4 side instead of s3 top and bottom only. Maybe that the reason for wet application as compare to dry for s3.

Yeap just googled, spigen and bse is wet application. I guess its impossible for a dry one

Thanks for the info btw

 

[frizee]

Do you guys have BSE discount codes to share?

Wanna try BSE Liao. Haha

 

[nisekin]

Do you guys have BSE discount codes to share?

Wanna try BSE Liao. Haha

Go sign up and apply newsletter got 10% discount.

Mine just shipped this morning

 

[thenakedshades]

Nanotech coverage is just nice the width of the display, no excess at all. Those having this problem one is those so called better coverage one but due to ip6 design.However the fingerprint is very bad therefore I tear it off.
My recommendation is currently glass if want had to go for those full coverage but it will not be glass all the way to the edge. It using other material like silicon to cover up the gap.
If not go for film type like spigen etc.

Nanotech doesn't have this problem because the width barely covers the display.

Guess that is what they all referring to.
But not all like this.
Nanotech one does not however the glass is a fingerprint magnet.

My nanotech has this problem. I walk in to their office to buy and apparently I spoke to the boss. There were a lot of staff in to pack their stuff. He told me his glass is now wider to cover the entire lcd display and still got 1-2mm more. And he asked his China factory to manufacture it this way due to customers demand. When he pasted it for me, I saw got mirco bubbles around the whole glass. Same like the bro posted but not so much.

I asked him why like that. He said it's normal and let it rest for a few days. If cannot disappear, call him and he will send replacement to me. I waited almost a week still the same, no change so I texted him and ask for a replacement. He asked me for my address then said will post out. End up until now still don't have. About 1 week liao, I doubt he got send out the glass but claim mail lost.

Anyway nanotech glass is cheap but not good. Fingerprint magnet and mirco bubbles a lot. Better don't buy.


FOR REFERENCE TO PEOPLE THINKING OF GETTING NANOTECH FROM QOO10

 

[darkbladez]

My nanotech has this problem. I walk in to their office to buy and apparently I spoke to the boss. There were a lot of staff in to pack their stuff. He told me his glass is now wider to cover the entire lcd display and still got 1-2mm more. And he asked his China factory to manufacture it this way due to customers demand. When he pasted it for me, I saw got mirco bubbles around the whole glass. Same like the bro posted but not so much.

I asked him why like that. He said it's normal and let it rest for a few days. If cannot disappear, call him and he will send replacement to me. I waited almost a week still the same, no change so I texted him and ask for a replacement. He asked me for my address then said will post out. End up until now still don't have. About 1 week liao, I doubt he got send out the glass but claim mail lost.

Anyway nanotech glass is cheap but not good. Fingerprint magnet and mirco bubbles a lot. Better don't buy.


FOR REFERENCE TO PEOPLE THINKING OF GETTING NANOTECH FROM QOO10

Currently, there won't be any tempered glass that can fit nicely on iPhone 6 without any bubble as the curved start before the display screen already. Only iphone 6+ can covered the whole display screen.

 

[DarkDrag1980]

I went to see the taiwan mos coat shop facebook and they are using vinyl stocker to customise the full iphone 6 covering. Thinking of buying transparent vinyl and DIY myself. U guys can chk it out at their facebook.

 

[thenakedshades]

Currently, there won't be any tempered glass that can fit nicely on iPhone 6 without any bubble as the curved start before the display screen already. Only iphone 6+ can covered the whole display screen.

Yup I know. But the thing is the boss said the bubbles will disappear after a few days but it didn't. Kind of got cheated. But it's a cheap product so no hard feelings. But to potential buyers of nanotech, just honestly skip the product.

 

[hawkz02]

I went to see the taiwan mos coat shop facebook and they are using vinyl stocker to customise the full iphone 6 covering. Thinking of buying transparent vinyl and DIY myself.u guus can chk it out at their facebook.

Since u order bse why still need??
Bse will meet your requirements