iPhone 6 PLUS Cases (NO SALES)

[herzog21]

Think the complain (at least with my experience) is that removing/installing the rather 'tight' PSAJ will leave small scratches on the metallic sides of the iPhone.
To make things worse, this $$$ case traps dirt particles inside similar to other less $$$ casing as well.

I did not notice it that much cept my buyer did. Hahaha

Conclusion:
Dun waste money on PSAJ.

come on. dont talk rubbish.
the back is of anondized aluminium while the top curved edges is of ion strengthened glass.
the case won't scratch the phone so easily

do back up yr post with pics please.

 

[Fizban]

since some bros here has asked me to help them order PSAJs I will do so again. Anyone interested?

If you are concerned about scratches on the case then skip it. Cos in case you are forgetting, all cases will get scratches/damaged in some way or other as they are DESIGNED to protect yr iphone.

But didn't PSAJ in their website state that their cases have self-healing scratch coating?

 

[galliano]

come on. dont talk rubbish.
the back is of anondized aluminium while the top curved edges is of ion strengthened glass.
the case won't scratch the phone so easily

do back up yr post with pics please.

Sorry no pics. Cos sold off the iPhone 5S already. And I'm definately not buying the PSAJ for my 6Plus anymore.

Anyway, it's up to u to believe my comments or not. My point here simply is that it's kinda redundant spending so much on PSAJ when similar less expensive cases share similar problems.

 

[derrickgoh]

Using SGP Clear Ultra Hybrid for my 6+. I would have preferred something similar to egg shell for the iPhone 5 series but seems like this time for 6 and 6+ none of SGP casing is as thin as egg shell.

Anyways, Ultra Hybrid not bad lah. Transparent so its good for those who want to show off the phone. The edge of the is protected by this slightly rubbery material. Supposed to have air pocket technology to protect against drops but no way in hell am I trying it out.

What I like is the casing provides some grip so its easier to use the phone in one hand. When using it naked it was quite smooth and gave the impression like going to slip out of your hand.

 

[speedster4005]

Using SGP Clear Ultra Hybrid for my 6+. I would have preferred something similar to egg shell for the iPhone 5 series but seems like this time for 6 and 6+ none of SGP casing is as thin as egg shell.

Anyways, Ultra Hybrid not bad lah. Transparent so its good for those who want to show off the phone. The edge of the is protected by this slightly rubbery material. Supposed to have air pocket technology to protect against drops but no way in hell am I trying it out.

What I like is the casing provides some grip so its easier to use the phone in one hand. When using it naked it was quite smooth and gave the impression like going to slip out of your hand.

Have you checked the SPG Capsule? THinner than Hybrid and has anti-yellowing coat...

 

[b0ib0ii]

guys is there any clear casing that the sim card tray is uncovered?? been looking for this type of casing as i need to take out my sim card very often. thanks

 

[mikecjw]

Have you checked the SPG Capsule? THinner than Hybrid and has anti-yellowing coat...

Spigen clear capsule will turn yellowish after few weeks of usage. I change to Ultra Hybrid Gunmetal and loving it !!!!

 

[VodkaPear]

anyone hav the issue for the psaj for 6/6+, the fitting is not that fit?

e.g. the phone is in the case, if u try to move the btm of the phone, it can move abit like less than mm?
not sure how much, but u can feel a very very small movement.

then when u try to hold it tight, on the right side, u can feel the right side can squeeze abit.

but no problem on the left.

 

[derrickgoh]

Have you checked the SPG Capsule? THinner than Hybrid and has anti-yellowing coat...

None to hands on but by looking at the case through the package, my friend and I agreed its just a LITTLE bit thinner hence I didn't bother. Definitely none as thin as the previous egg shell line.

 

[speedster4005]

Spigen clear capsule will turn yellowish after few weeks of usage. I change to Ultra Hybrid Gunmetal and loving it !!!!

If that happens can claim warranty

 

[speedster4005]

anyone hav the issue for the psaj for 6/6+, the fitting is not that fit?

e.g. the phone is in the case, if u try to move the btm of the phone, it can move abit like less than mm?
not sure how much, but u can feel a very very small movement.

then when u try to hold it tight, on the right side, u can feel the right side can squeeze abit.

but no problem on the left.

So far ok here. Other than the sort of "burnt-like" deformities and a couple of deep joints.

 

[hawkz02]

Sorry no pics. Cos sold off the iPhone 5S already. And I'm definately not buying the PSAJ for my 6Plus anymore.

Anyway, it's up to u to believe my comments or not. My point here simply is that it's kinda redundant spending so much on PSAJ when similar less expensive cases share similar problems.

Do not compare your psaj for ip5/5s with ip6/6plus. The design is totally different.
Ip6/6plus psaj wrap around the phone and no dust will enter. Psaj for ip5/5s locking is at both side and cause of the "straight" design the top and bottom got gap so dust can enter. As for the scratching of the phone please make it clear is the side scratched or the chamfered edge?? Plastic against aluminum which one is tougher?? I think something is very very wrong here.
I own psaj for all mine ip series and I do not have issue like what u mentioned.
Lastly do not live in the past and think everything will not change. Try out the new psaj before commenting.
Same like those ppl still living in ip3g era without trying out the new iPhone then say ip6 everything still very restricted which is not the case anymore.

 

[VodkaPear]

So far ok here. Other than the sort of "burnt-like" deformities and a couple of deep joints.

i tried 2 cases, both aso like that.

i jus felt that the QC this time round not very gd.

i got a few case, aso hav the "burnt-like" deformities and deep joints.

 

[aikishi86]

I saw nubox selling Griffin Survivor Core for iP6+, compared to Otterbox Commuter is it about the same or better?

 

[derrickgoh]

Spigen clear capsule will turn yellowish after few weeks of usage. I change to Ultra Hybrid Gunmetal and loving it !!!!��

Mine is clear but also Ultra Hybrid. Not bad lah but still wishing for egg shell type thinness. LOL!

 

[arcturuz]

Managed to saw EpiCenter at Takashimaya is selling the PSAJ. The rest of the outlet do not have stocks yet.

saw psaj in taka epic ..selling 49 for ip6+.

the epicenter ones, do they come with 1 power support sp?

 

[galliano]

Do not compare your psaj for ip5/5s with ip6/6plus. The design is totally different.
Ip6/6plus psaj wrap around the phone and no dust will enter. Psaj for ip5/5s locking is at both side and cause of the "straight" design the top and bottom got gap so dust can enter. As for the scratching of the phone please make it clear is the side scratched or the chamfered edge?? Plastic against aluminum which one is tougher?? I think something is very very wrong here.
I own psaj for all mine ip series and I do not have issue like what u mentioned.
Lastly do not live in the past and think everything will not change. Try out the new psaj before commenting.
Same like those ppl still living in ip3g era without trying out the new iPhone then say ip6 everything still very restricted which is not the case anymore.

Bro, I just stating my experience which I mentioned clearly. Good that you brought up YOUR experience w the NEW PSAJ for iPhone6. Chill man...

U selling PSAJ or big fan or just feel better justifying the $$$$ of ur purchase? Hahaha..

I kinda hoping you give me one and I can take pic for u. Hopefully no scratch lah hor

 

[darkbladez]

Checking if there is anyone still interested in getting PSAJ from Japan.

Price is higher than P2O but cheaper than Epicenter.

PM me if you are interested.

 

[hawkz02]

Bro, I just stating my experience which I mentioned clearly. Good that you brought up YOUR experience w the NEW PSAJ for iPhone6. Chill man...

U selling PSAJ or big fan or just feel better justifying the $$$$ of ur purchase? Hahaha..

I'm not selling any psaj or a big fan of power support just a guy who love to try out all cases for iphone.
I do not might if u speaking from own experience with the current product or felt/touch thing and not base on past experience with the brand. You misleading ppl here.
I saw a lot of ppl just love to shoot off without fact or any self experience which is a no no to me.
U use it and comment be it pro or con those ppl who want to buy will make their own judgment but base on real actual feedback not just some assumption.
This is to the best of the whole community here. If not ppl might go one round then end up going back to a case they shun in the beginning due to some assumption feedback.

 

[whiteil]

Tiagong is $49.


I might be doing a MO, anybody keen?

since some bros here has asked me to help them order PSAJs I will do so again. Anyone interested?

If you are concerned about scratches on the case then skip it. Cos in case you are forgetting, all cases will get scratches/damaged in some way or other as they are DESIGNED to protect yr iphone.

Checking if there is anyone still interested in getting PSAJ from Japan.

Price is higher than P2O but cheaper than Epicenter.

PM me if you are interested.

Maybe y'all can combine forces?