Hi,
my smart Tv wifi kaput. So got to install lan cable. My speed is 1Gpbs and distance is 13m fr router. Can I still use Cat5e cable? Tks.
More then capable. Just use it.Hi,
my smart Tv wifi kaput. So got to install lan cable. My speed is 1Gpbs and distance is 13m fr router. Can I still use Cat5e cable? Tks.
So long.... How you hide the cableI using 30 metre Cat 5e for my 1gbps.
No issues for me on Speedtest.
So long.... How you hide the cable
can SIC where you got ur brackets? Looking to get one for LAN Cable Management as wellDIY inside Electric Cable Bracket.
can SIC where you got ur brackets? Looking to get one for LAN Cable Management as well
| Category | Shielding | Max Transmission Speeds | Max Bandwidth |
| Cat 3 | Unshielded | 10Mbps | 16 MHz |
| Cat 5 | Unshielded | 10-100Mbps | 100 MHz |
| Cat 5e | Unshielded | 1,000Mbps – 1Gbps | 100 MHz |
| Cat 6 | Shielded or Unshielded | 10Gbps up to 55 meters | 250 MHz |
| Cat 6a | Shielded | 10Gbps up to 55 meters | 500 MHz |
| Cat 7 | Shielded | 100Gbps up to 15 meters | 600 MHz |
| Cat 7a | Shielded | 100Gbps up to 15 meters | 1,000MHz |
| Cat 8 | Shielded | 40Gbps up to 30 meters | 2,000MHz |
| Category | Max. Data Rate | Bandwidth | Max. Distance | Usage |
|---|---|---|---|---|
| Category 1 | 1 Mbps | 0.4 MHz | Telephone and modem lines | |
| Category 2 | 4 Mbps | 4 MHz | LocalTalk & Telephone | |
| Category 3 | 10 Mbps | 16 MHz | 100 m (328 ft.) | 10BaseT Ethernet |
| Category 4 | 16 Mbps | 20 MHz | 100 m (328 ft.) | Token Ring |
| Category 5 | 100 Mbps | 100 MHz | 100 m (328 ft.) | 100BaseT Ethernet |
| Category 5e | 1 Gbps | 100 MHz | 100 m (328 ft.) | 100BaseT Ethernet, residential homes |
| Category 6 | 1 Gbps | 250 MHz | 100 m (328 ft.) 10Gb at 37 m (121 ft.) | Gigabit Ethernet, commercial buildings |
| Category 6a | 10 Gbps | 500 MHz | 100 m (328 ft.) | Gigabit Ethernet in data centers and commercial buildings |
| Category 7 | 10 Gbps | 600 MHz | 100 m (328 ft.) | 10 Gbps Core Infrastructure |
| Category 7a | 10 Gbps | 1000 MHz | 100 m (328 ft.) 40Gb at 50 m (164 ft.) | 10 Gbps Core Infrastructure |
| Category 8 | 25 Gbps (Cat8.1) 40 Gbps (Cat8.2) | 2000 MHz | 30 m (98 ft.) | 25 Gbps/40 Gbps Core Infrastructure |
| Cable Type | Shielding | Maximum Frequency | Potential Throughput |
| Cat 1 | No | 10kHz | 1Mbps |
| Cat 2 | No | 1Mhz | 4Mbps |
| Cat 3 | No | 16Mhz | 10Mbps |
| Cat 4 | No | 16Mhz | 10Mbps |
| Cat 5 | No | 100MHz | 100Mbps |
| Cat 5e | No | 100MHz | 1Gbps |
| Cat 6 | Sometimes | 250Mhz | 1Gbps |
| Cat 6a | Sometimes | 500MHz | 10Gbps |
| Cat 7 | Yes | 600Mhz | 10Gbps |
| Cat 8 | Yes | 2GHz | 40Gbps |
Hi,
my smart Tv wifi kaput. So got to install lan cable. My speed is 1Gpbs and distance is 13m fr router. Can I still use Cat5e cable? Tks.
I using 30 metre Cat 5e for my 1gbps.
No issues for me on Speedtest.
Yes, cat5e is more than enough for 1Gbps or even 2.5Gbps up to 100m. Unless you live in an extremely huge house, it is unlikely that you will hit this 100m limit.
However, cat5e cannot support 10Gbps. You need cat6.
Cat5e and cat6 are very similar in terms of price today. No reason to go for cat5e anymore (unless you need lots of cables and cost is a concern).
5e at that short distance is still fine. Btw your tv wont be able to saturate the entire bandwidth of 1Gbps. Tv the most even streaming of 4k contents are not demanding these days. At most pulling max 200Mbps at any given one point of time.
