Lancool K-series Users Group

acedarren92

Member
Joined
May 9, 2010
Messages
353
Reaction score
0
the fan adapter sits vertically across a few dvdrom slots..and the fan is mounted in the adapter..

notice the screw holes in at the side of the fan adapter..they are for securing the fan adapter to the dvdrom cage..

i think and think still cannot imagine how u install sio. i look at the pic of k62 there is no hole for u to screw the adapter inplace leh? or is it u screw inplace at the dvd holes there?
 

repel89

Banned
Joined
May 31, 2008
Messages
5,076
Reaction score
0
wah..then the excalibur fan u can tahan?
mine is shelved liao..wahaha..
mebbe u can raise the legs and mount the bottom intake on the outside so that if wires wun be an obstruction?

Haha, okok la. Its only one fan not so bad. Only when music/movie is off then it becomes audible.

i think and think still cannot imagine how u install sio. i look at the pic of k62 there is no hole for u to screw the adapter inplace leh? or is it u screw inplace at the dvd holes there?

Lol, the front bezels can be taken out and this can be put in place. Haha, when the time comes when the rig is done then show u ba :D:D
 

vivi2005

Master Member
Joined
Feb 25, 2005
Messages
3,098
Reaction score
0
1st round cable management
2qx17w7.jpg


2nd round cable management
scx95i.jpg
 

kaixax555

Honorary Member
Joined
Nov 6, 2007
Messages
125,545
Reaction score
321
oc-ed to 2.8ghz, 44 degrees idle, stock cooler, non-aircon, turbo boost enabled...
 

ra[g]e

Supremacy Member
Joined
May 4, 2008
Messages
5,934
Reaction score
76
Oh ya, must ask u. With speedstep. How low does ur frequency and voltage goes?

I set manual voltage, when speedstep enables. The voltage doesnt change. Zzz Or u set to auto?
You need to use 'offset' voltage, not auto or manual :o

For that 'offset' voltage mode, base voltage is determined by multiplier/bclk, then you adjust... i.e. +0.15v for me (200x20) gives a linpack vcore of 1.35v... with this mode as it clocks down the vcore drops as well. Note that at 191x21 the base voltage I get is much higher...

Not at my comp now but iirc voltage drops to ~1.0Xv @ 1.8GHz at the lowest...
 

repel89

Banned
Joined
May 31, 2008
Messages
5,076
Reaction score
0
this one can count? I disable speedstep iirc

Y ur frequency so weird de? Haha.


You need to use 'offset' voltage, not auto or manual

For that 'offset' voltage mode, base voltage is determined by multiplier/bclk, then you adjust... i.e. +0.15v for me (200x20) gives a linpack vcore of 1.35v... with this mode as it clocks down the vcore drops as well. Note that at 191x21 the base voltage I get is much higher...

Not at my comp now but iirc voltage drops to ~1.0Xv @ 1.8GHz at the lowest...

Hmm, offset voltage. Think i couldnt find it in my bios. Maybe when u are home and free can take a screenshot of the bios for me?

Shall try looking for it again. Thanks! Cuz my voltage doesnt drop with the lowering frequency.

Thanks!
 

ra[g]e

Supremacy Member
Joined
May 4, 2008
Messages
5,934
Reaction score
76
p7p55d-Bios-AI-Tweak-02.jpg


Used google... this is how it looks like, see the offset voltage mode... except I don't use auto after that, I enter a fixed value.

This is the bios at manual mode:

09130532907l.jpg
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top