As I mentioned before in your other thread, these are the risk of using AIO water cooler as compared to air cooling. There is always a chance of leakage, but AIO water coolers are mostly better now and so this risk is lower. Liquid evaporation will always happen throughout the lifetime of the cooler, but good coolers tend to use better material for their tubing, which will slow down this drying up process, and could take many years before you run into problems. Pump failure, this is hard to tell. But with Arctic offering a solid 6years warranty on their AIO cooler, at least you can still send faulty AIO coolers from them back for repair.For those using good one like artic freezer….
how many years can it work?
does it really have problems like leak? Pump failure and water run out?
I believe they don’t come with LGA 1700 mounting kit by default at this point. So you will need to request for the mounting kit separately from the distributor or from Scythe. It should be free.Btw is fuma 2 or mugen 5 compatible with 12700? Need buy separate 1700 bracket?
my legacy cooler master 240 AIO using on my i5-3570k still going strong.after 7 years i thinkFor those using good one like artic freezer….
how many years can it work?
does it really have problems like leak? Pump failure and water run out?
It depend Heng suay one. Especially for hw install noob like me that get shop dude to assemble for me. i am out of home 15 hours almost everyday. On my rest day I don’t want deal with troubleshootin.my legacy cooler master 240 AIO using on my i5-3570k still going strong.after 7 years i think
Still overclock to 4Ghz i think
but i got another brand for my current unit using ryzen 2600 the 240 aio fail less than 2 years...rma liao.
cant rem brand dist is tech dynamic
just got the arctic AIO 240MM recently.
Is it ok to manual run the fun at 100% all the way?
just got the arctic AIO 240MM recently.
Is it ok to manual run the fun at 100% all the way?
Just curious why you would like to set the cooler to work at 100% all the time? If it is because you saw the reviews mentioning about the grinding noise at a certain RPM, I can confirm I don't experience this issue with at least 3 Arctic Liquid Freezer II units that I have tested. If it is because you want it to run cooler, then you should just let the system manage the speed of the pump and fan based on the load as the processor. If the processor it not running hot, running it at full speed all the time will only drop it to as low as the room temp, since the liquid will also be at/ close to room temp if there is no or little heat. So you won't expect to see the CPU at 24 degrees Celsius when your room ambient temp is 29 degrees celsius for example.just got the arctic AIO 240MM recently.
Is it ok to manual run the fun at 100% all the way?
If there is no issue with auto, then leave it be. Running it at 100% may reap little benefits over default settings, and instead, cause issues since it will wear out the fan motor and water pump faster. Unfortunately, most products are not meant to work at 100% or anywhere close, for prolong period of time. You can do that for some time, but it will surely have a negative impact on the longevity/ durability of the product in the longer run.tks guys for the replies! just wondering only and i set it to auto lol