mATX gaming rig

ctrlesc

Member
Joined
May 5, 2008
Messages
319
Reaction score
18
Just asking, if not overclocking, then no need for CPU cooler right? In this case, what would be the idle temperature and full load temperature be with cpu stock fan? E.g. with a i7-4770 processor. :s8:
 

royfrosty

High Supremacy Member
Joined
Jul 23, 2009
Messages
27,727
Reaction score
1,553
Just asking, if not overclocking, then no need for CPU cooler right? In this case, what would be the idle temperature and full load temperature be with cpu stock fan? E.g. with a i7-4770 processor. :s8:

My i5-3470 the last time already 42 at idle. With prime95 running for 30mins it hit 78 degrees.
 

hoven00

Member
Joined
Sep 29, 2011
Messages
314
Reaction score
0
bro lordie, what is your casing? :s13::s13::s13::s13:

That's a silverstone sg02

Here's the itx build that i built a few weeks back with the cm elite 120. Total cost..~$350
*crappy phone pic
VVPOzct.jpg
 

ctrlesc

Member
Joined
May 5, 2008
Messages
319
Reaction score
18
My i5-3470 the last time already 42 at idle. With prime95 running for 30mins it hit 78 degrees.

Means will need a cpu cooler even if is not overclocking. hmm...

Currently looking at the Antec H20620 and Cosair H60 AIO liquid cooler. Not sure if it is good. Reading the reviews some says is okay but some says air cooler is better when compare to these two models. But I not like the massive air cooler as I am getting a mATX casing. :s22:
 

royfrosty

High Supremacy Member
Joined
Jul 23, 2009
Messages
27,727
Reaction score
1,553
Means will need a cpu cooler even if is not overclocking. hmm...

Currently looking at the Antec H20620 and Cosair H60 AIO liquid cooler. Not sure if it is good. Reading the reviews some says is okay but some says air cooler is better when compare to these two models. But I not like the massive air cooler as I am getting a mATX casing. :s22:

Not many itx chassis can accept h60. The cm120i recall must remove the HDD rack.

Another contender is the Silverstone sg9/10. This chassis can accept any heatsink up to not more than 140mm from the socket to the chassis slidding door.
 

shutterdogz

Member
Joined
Jan 17, 2011
Messages
161
Reaction score
0
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top