Mobo or processor uplorried?

ykgoh

Master Member
Joined
Jan 1, 2000
Messages
2,782
Reaction score
0
Today cpu cannot POST or power on.

Nothing on screen. blank screen no signal to vga connector. Monitor power button just blink in standby mode.

Tried e following:
  • disconnected hdd, odd n non-essential parts.
  • reseated ram sticks.
  • left 1 stick ram.
  • re-connected mobo 24 pin n processor 4 pin power connector.
  • removed n put back cmos battery.
  • paper clip test of psu : passed.
  • removed n reinstall processor's heat sink.

Still cannot POST. Only blank screen. Using IGP onboard graphics all along. Fans (psu, casing, heatsink) all spinning. But no POST beep or display. No sound no picture.

Last night still use n shutdown properly with no hardware or software change.

Means what huh? Mobo and/or processor uplorried? :(
 
Last edited:

thegamer1907

Master Member
Joined
Apr 21, 2009
Messages
2,999
Reaction score
6
might want to list your setup.. suspect it is the mobo. did the HDD activity led blink when the fans are spinning?
 

ykgoh

Master Member
Joined
Jan 1, 2000
Messages
2,782
Reaction score
0
might want to list your setup.. suspect it is the mobo. did the HDD activity led blink when the fans are spinning?

No light blinking at e power button to indicate disk activity. But press power button will start e psu n fans. But no screen output or sign of POSTing. Last time can press n hold e power button when on to force switch off. Now does not work. Need to flip e psu switch.

Processor: AMD Athlon II X4 640
Mobo: Biostar A880G+ (AM3)
RAM: 2 x 2GB Kingston DDR3 1333 Value RAM
Graphics: Radeon HD 4250 IGP (880G chipset)
HDD: Seagate 500Gb SATA-2 7200 RPM
ODD: Samsung 22X DVD Writer
 

devilwahaha

Senior Member
Joined
Feb 25, 2010
Messages
2,366
Reaction score
0
No light blinking at e power button to indicate disk activity. But press power button will start e psu n fans. But no screen output or sign of POSTing. Last time can press n hold e power button when on to force switch off. Now does not work. Need to flip e psu switch.

Processor: AMD Athlon II X4 640
Mobo: Biostar A880G+ (AM3)
RAM: 2 x 2GB Kingston DDR3 1333 Value RAM
Graphics: Radeon HD 4250 IGP (880G chipset)
HDD: Seagate 500Gb SATA-2 7200 RPM
ODD: Samsung 22X DVD Writer
Usually even if some part of mobo or CPU uplorry but PSU is working when power on all the fans will auto spin up one.

However I think the only way to troubleshoot and find out the exact faulty part for your case is to swap parts and test with known working parts, which I suspect might be very hard to find now lol.
 

ykgoh

Master Member
Joined
Jan 1, 2000
Messages
2,782
Reaction score
0
Usually even if some part of mobo or CPU uplorry but PSU is working when power on all the fans will auto spin up one.

However I think the only way to troubleshoot and find out the exact faulty part for your case is to swap parts and test with known working parts, which I suspect might be very hard to find now lol.

Any simple way to confirm if processor or mobo is dead? Or both dead?
 

Lethal

Senior Member
Joined
May 18, 2013
Messages
979
Reaction score
0
Based on ur test result, high chance its ur mobo that is faulty.
U can try this method to test ur processor, remove ur heatsink fan and power ur system. On for around 10 secs and off it. If ur processor is slightly hot means its still working.
 

devilwahaha

Senior Member
Joined
Feb 25, 2010
Messages
2,366
Reaction score
0
Any simple way to confirm if processor or mobo is dead? Or both dead?

I borrowed a Biostar board(P67 or H67 or something) from a friend when my z77 e4m was dead, that board was friggin brilliant. There were these small LED indicators that acts as a visual POST for each of the core components like RAM/CPU/etc.

If your board doesnt even POST and doesnt have a debugger indicator of some sorts like that, I dont think there is another way to troubleshoot other than swapping parts. I might be wrong though.
 

ykgoh

Master Member
Joined
Jan 1, 2000
Messages
2,782
Reaction score
0
suggest clean ram contacts & swap psu to cfm 1st.

Paper clip test not good enuff to confirm ah? Will try clean RAM contact. But no spare working PSU to try.

Based on ur test result, high chance its ur mobo that is faulty.
U can try this method to test ur processor, remove ur heatsink fan and power ur system. On for around 10 secs and off it. If ur processor is slightly hot means its still working.

Bought e processor n mobo in Jan 2011. 3 year warranty for both. Just expired by 2 months nia all zhun zhun start dying. WTF... :eek:

I borrowed a Biostar board(P67 or H67 or something) from a friend when my z77 e4m was dead, that board was friggin brilliant. There were these small LED indicators that acts as a visual POST for each of the core components like RAM/CPU/etc.

If your board doesnt even POST and doesnt have a debugger indicator of some sorts like that, I dont think there is another way to troubleshoot other than swapping parts. I might be wrong though.

Icic. Kum sia. If only mobo spoilt, I can see if can get a leftover old stock 760G AM3 board from SLS for $100 only. if processor also dead, then as well get a cheap Intel Pentium mobo+processor bundle.
 
Last edited:

ykgoh

Master Member
Joined
Jan 1, 2000
Messages
2,782
Reaction score
0
Based on ur test result, high chance its ur mobo that is faulty.
U can try this method to test ur processor, remove ur heatsink fan and power ur system. On for around 10 secs and off it. If ur processor is slightly hot means its still working.

Removed heatsink n powered on 3 times.

First time 10 seconds. Room temperature.
Second time 20 seconds. No sign of getting warmer.
Third time 60 seconds. Still not warm or hot.

Means even processor also uplorried?
 

royfrosty

High Supremacy Member
Joined
Jul 23, 2009
Messages
27,727
Reaction score
1,553
Might wanna bring down your board and CPU to nigel shop. On prior notice please ask if he has any AM3 boards lying around that he can test.

If he plug in and still fails then possible that the cpu faulty. If it pass then could be the board faulty.
 

Providence

Arch-Supremacy Member
Joined
Aug 20, 2004
Messages
18,172
Reaction score
0
Dude! Your symptom is exactly like my dad's PC problem before Chinese New Year. His PC showed this symptom exactly after Christmas 2013. Hahahaha...

I checked the PC and swapped the PSU/RAM. No sign of recovery. I swapped the motherboard battery. Still the same thing. I swapped the graphics card. Still the same thing. The hard-disk is not running though but the ventilation fans are running.

Conclusion: The motherboard is dead. Because I suspect the motherboard is not generating power to the other components since the PSU connector is plugged to the board. The ventilation fans on the casing are turning because they are plugged to the PSU directly. The only thing that is turning is the heatsink fan on the processor though. The graphics card ventilation fan is not turning either.
 

ykgoh

Master Member
Joined
Jan 1, 2000
Messages
2,782
Reaction score
0
Dude! Your symptom is exactly like my dad's PC problem before Chinese New Year. His PC showed this symptom exactly after Christmas 2013. Hahahaha...

I checked the PC and swapped the PSU/RAM. No sign of recovery. I swapped the motherboard battery. Still the same thing. I swapped the graphics card. Still the same thing. The hard-disk is not running though but the ventilation fans are running.

Conclusion: The motherboard is dead. Because I suspect the motherboard is not generating power to the other components since the PSU connector is plugged to the board. The ventilation fans on the casing are turning because they are plugged to the PSU directly. The only thing that is turning is the heatsink fan on the processor though. The graphics card ventilation fan is not turning either.

Providence, so u replaced e mobo only n it has been fine after that?

What about e processor? Was it affected?
 

jtjt00

Arch-Supremacy Member
Joined
Jan 1, 2000
Messages
17,665
Reaction score
510
Biostar is known for having issue 2-3 years down the road.
 

ykgoh

Master Member
Joined
Jan 1, 2000
Messages
2,782
Reaction score
0
Biostar is known for having issue 2-3 years down the road.

I thot it's good for budget but still reliable board? :eek:

It built in a self-destruct timer to kill itself after warranty expires? :mad:
 

Jian19

Honorary Member
Joined
Aug 27, 2004
Messages
100,952
Reaction score
27,641
Nowadays most product can't last a long time unlike last time..

I have a hitachi TV at home, 3 years standard warranty, we extend another 2 years

After 3 years and a few weeks up lorry

Send to repair 3 weeks then get back..
 

royfrosty

High Supremacy Member
Joined
Jul 23, 2009
Messages
27,727
Reaction score
1,553
Biostar have always been a cheapest board. But however they arent that reliable. Furthermore most of the components after 3 years will start to have those minor problems, or should i say minor hiccups once in a while.

Handphones also, designed to last for a year or 2. After that all the minor issues starts to come out.
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top