Monitor no Signal Problem

[genesix32]

Hey everyone, my monitor suddenly stopped working this morning with "no signal" output from my monitor. My computer is newly built and was running properly for 1-2 months already. (Windows install from shop one)

During the first boot, the startup screen showed (Asus) and then becomes no signal, any subsequent boot is totally no signal.
When I boot the computer, there is no beep or sound and the computer seems to be running properly (Inbuilt, processor, graphic fan moving).

Solutions I have tried:
Boot without my Msi GTX 970 graphic card
Remove and place back my graphic card
Remove and place back my ram
Use 1 ram card instead of 2
Unplug and replug video cable

Helppppppppp!

 

[xxDonmaxx]

The solutions u tried all didnt work?

[Edit2] Do u have a second monitor or a laptop? It could be monitor problem

 

[genesix32]

I dont have another monitor and laptop connection seems almost impossible, but since the monitor can detect whether a cable in plugged in should not be monitor issue I guess, any other suggestions?

 

[xxDonmaxx]

The solutions u tried earlier in first post didnt work? If u did answer my question I probably miss it.

Did you do anything to your computer like eg. Resit gpu or knock something hard to it?

On a sidenote is ur psu modular?

 

[Kennedy]

I encountered this problem when I used my monitor with a different computer. HDMI no signal. DVI ok, and use it since.

 

[Kapish]

could be the display cable problem. can try booting with integrated graphics?

 

[Goodshot]

What cable u using ? My hdmi cable spoil every 2 mths . Give up now use dvi-d cable sua

 

[genesix32]

@Donman yeah I tried all the solutions, nope only play games only, superflower fully modular one (The graphic and processor fan running properly)
@Kennedy I not really sure what my cable is but the monitor got label VGA near the slot
@Kepish You mean boot without nvidia graphic card?

Had to confess im using a old monitor lol, 5 years already, so you guys think cable spoil? Cos the monitor can detect whether cable plugged in or not

 

[xxDonmaxx]

Looks like either a) cable spoilt or b) monitor spoilt or c) vga port spoilt... if u have a second monitor or tv to troubleshoot it will make things clearer

 

[genesix32]

I tried connecting to my TV with the VGA cable but also no signal, should I buy a dvi cable?

 

[xxDonmaxx]

Do u have a spare vga cable?

 

[Goodshot]

I tried connecting to my TV with the VGA cable but also no signal, should I buy a dvi cable?

I think u should , because I usually keep a dvi , vga , hdmi, display port cable 1 each with me

 

[jtjt00]

Most likely graphics card issue.

 

[xiaowhois]

no try connect to your tv and display, new tv should have vga/dvi/hdmi

 

[Deathzz]

all properly started up cpu should have a beep sound. before image pop out.

if no beep and no signal or watsoever. rectify something in your cpu system

 

[mosmos]

did you have a good ventilation between monitor~? try the test button for monitor if there's any~

 

[noobiee]

usually when you start up your PC, should have BEEP sound before going windows right?

if no beep sound then you have to troubleshoot almost each part in the system.

 

[genesix32]

Im going to troubleshoot tmr and wait for my dvi cable to arrive, any shops near queenstown to recommend for repair? And would like to know monitor shops too, courts challenger all dont have :/

 

[mosmos]

usually when you start up your PC, should have BEEP sound before going windows right?

if no beep sound then you have to troubleshoot almost each part in the system.

my computers never made a sound during startup~

 

[genesix32]

Just incase anyone used Asus Progamer Z97, my mobo had 2 red led light on, I tried checking but the manual did not indicate what it means, is it normal or what does it mean? Still need recommendation for computer shops near queenstown