MyRepublic fibre - Part 4

Status
Not open for further replies.

ntec66

Senior Member
Joined
Jan 27, 2010
Messages
1,052
Reaction score
0
That means OpenNet can take up to a maximum of 40 days to reject a Request if there is insufficient capacity. When ISPs/RSPs submit another Request, the whole cycle repeats.

Yes up to 40 'business' days if insufficient capacity between CO and TP. But it is not to reject, it is within 40 days to complete the installation. If any rejection OpenNet must within 3 days of request inform ISP. And those reason are listed out in detail in Schedule 1, they cannot anyhow give reason.

m1fueyP.png
 
Last edited:

xRenol

Supremacy Member
Joined
Dec 27, 2011
Messages
7,243
Reaction score
194
Yes up to 40 'business' days if insufficient capacity between CO and TP. But it is not to reject, it is within 40 days to complete the installation. If any rejection OpenNet must within 3 days of request inform ISP. And those reason are listed out in detail in Schedule 1, they cannot anyhow give reason.

m1fueyP.png

It was mentioned in the last part of 5.4 and subject to clause 5.2 (which is talking about Requests).
 

ntec66

Senior Member
Joined
Jan 27, 2010
Messages
1,052
Reaction score
0
It was mentioned in the last part of 5.4 and subject to clause 5.2 (which is talking about Requests).

Yes, they have to complete it according to the defined time period or reject only for these reasons in 5.4, that are very specific:

0MZKWr2.png
 

misato

Supremacy Member
Joined
Jan 1, 2000
Messages
6,148
Reaction score
0
Yes, they have to complete it according to the defined time period or reject only for these reasons in 5.4, that are very specific:

0MZKWr2.png
Point c is very gray. If cable is faulty, it is also classified as non operational. In fact anything but functional is considered non-operational. For example, patching issue/splicing issue, connector faulty etc.. all there are examples that can cause an opennet connection to be non-functional. To me its like a universal clause to cover their ass.
 

skn_16

Senior Member
Joined
Jun 14, 2009
Messages
587
Reaction score
0
Hi

I have connected my mbp to ONT and the router and did speedtest seperately.

Good news is I am getting 900plus DL and 700plus UL speed.:D

Thx

I got similar results, my iMac is on wired CAT6, capped at 100/100. Cause is my router, a E3000 on DD-WRT. Found out that DD-WRT is somehow capping the WAN throughput. Direct CAT6 to ONT I am getting 700+ maybe my iMac is old...
 

misato

Supremacy Member
Joined
Jan 1, 2000
Messages
6,148
Reaction score
0
What you may not know is most home routers on the is unable to sustain high LAN-WAN / WAN-LAN throughput. In fact, its only for the past 1+ year are we only seeing more affortable routers with a 1GB WAN interface.

Lots of review show only newer high end home routers can substain more than 800mbps of WAN-LAN/LAN-WAN throughput. The link below is a complied performance figure from a fairly reputable site. You can check against their figures against the model you own to gauge what is your likely max WAN speed your router can give. For example, the RT-AC68U have a tested speed of 731Mbps. This is figure can change with firmware revision but it will give you a rough estimate on the baseline performance range to look at. Anything more than this 731mbps figure is good. Lesser means something is not optimal.

Even if using the MR speedtest, it is still a shared resource and the performance figure you get is only indicative of the speed at the point of time the test was done. To be sure, one has to run this same test over a period of time ideally on a hourly basis over 24 hours and doing a medium on the collected figures to asscertain.

Quick reference:
Router Charts - WAN to LAN Throughput - SmallNetBuilder
 
Last edited:

Dexter71

Senior Member
Joined
Jul 29, 2000
Messages
524
Reaction score
2
Thanks

Do you mean that gigabit hubs will not be able support such bandwidth?

I am getting 900+ from ASUS router to MacbooK but have not try a wired one from gigabit hub within my network to Macbook.
 

misato

Supremacy Member
Joined
Jan 1, 2000
Messages
6,148
Reaction score
0
Thanks

Do you mean that gigabit hubs will not be able support such bandwidth?

I am getting 900+ from ASUS router to MacbooK but have not try a wired one from gigabit hub within my network to Macbook.
One of the key metric for a router internet performance is its "routing Throughput". For a normal switch/hub we are only talking about LAN-LAN throughput. The difference is data is routed between 2 different "LAN" interfaces in a WAN-LAN/LAN-WAN for a router. For a switch/hub, the term is data is switch from one physical port to the other but they are on the same common interface. Its pretty common for a properly design Gigabit switch to perform around 800mbps upwards and high end ones (enterprise) giving closer to near in throughput of 1Gbps.

In a layman term, a hub/switch is akin to transferring a parcel from one room to another room in your house. A router is more like having a postman pick up a parcel from your house and delivering it to another physical location that's not in your house which needs two steps. Transfer parcel from a room in your house to the door and from the door transfer to the postman.

So Assuming for you, your already doing 900+ in throughput on the ports between the switch in the Asus router and if you add another switch in, you can expect the speed to drop a little more.

Thus it is fair to say that no Gigabit network equipment can achieve more than 1Gbps or even close to 1Gbps due to the fact that there are lots of overheads from the network L2 - L7 layers which are consumed for non-data purpose.
 
Last edited:

Anybody

Senior Member
Joined
Jan 1, 2000
Messages
929
Reaction score
2
After upgrade to 1Gbps, I feel that everything loads much slower(sites, images etc) even though speedtest speed are good - compare to when I am with PureHD.

I don't know what's the problem but I did change from N66U to AC68.
Hope this is not the cause :(
 

nivleK1985

Senior Member
Joined
Feb 20, 2005
Messages
1,710
Reaction score
0
After upgrade to 1Gbps, I feel that everything loads much slower(sites, images etc) even though speedtest speed are good - compare to when I am with PureHD.

I don't know what's the problem but I did change from N66U to AC68.
Hope this is not the cause :(

do you still have your N66 with you? You can try that.
 

Just Me

Arch-Supremacy Member
Joined
Jan 1, 2000
Messages
14,249
Reaction score
41
After upgrade to 1Gbps, I feel that everything loads much slower(sites, images etc) even though speedtest speed are good - compare to when I am with PureHD.

I don't know what's the problem but I did change from N66U to AC68.
Hope this is not the cause :(
How slow is slow? Can pass some sites to test?
 

Binaries

Member
Joined
Apr 1, 2011
Messages
418
Reaction score
0
After upgrade to 1Gbps, I feel that everything loads much slower(sites, images etc) even though speedtest speed are good - compare to when I am with PureHD.

I don't know what's the problem but I did change from N66U to AC68.
Hope this is not the cause :(

I can't help but to say it might be AC68U being the culprit, I feel the same, great numbers when AC68U don't bug out otherwise.. sites are often slow here and there but I am too tired to check if it might be another routing issue as well.

Just hoping that a new firmware comes out for AC68U soon to eliminate equipment issues being the posibilities, otherwise this is just another expensive dead weight.
 

archie1810

Member
Joined
Apr 18, 2005
Messages
185
Reaction score
0
Just got my 1 Gbps ULTRA MR!

Hello - New to MR here... Just got my 1 Gbps link yesterday.
Anyone of you has subscribed to MR Static IP, please? I'd like to ask.



What is the Static IP Address range that I will be getting if I subscribed for one?

Will it be directly visible to internet? Or it will still be behind your "giant" firewall?

Currently, I'm assigned a NAT'ed "PUBLIC IP" 172.x.x.x but my DynDNS tells me I'm behind Firewall NAT under 103.x.x.x - so which Static IP will I be getting? The actual that My DynDNS will tell me or still behind Firewall NAT ???


FYI:
NOBODY picks up MR Technical Support Phone, quiet disappointed first impression on MR now!

Thanks for any comment.

Arc. :)
 

Anybody

Senior Member
Joined
Jan 1, 2000
Messages
929
Reaction score
2
do you still have your N66 with you? You can try that.

Yeah, will change it back and try when I got home.

How slow is slow? Can pass some sites to test?

Qoo10, todayonline.com, just to name a few...
When I tried funshion site, now it can't even load. Before upgrade it works fine. Taobao.com was working fine too, now it's very slow as well.
One of the slowness is the loading of images, it's like I am back to dialup :o

I can't help but to say it might be AC68U being the culprit, I feel the same, great numbers when AC68U don't bug out otherwise.. sites are often slow here and there but I am too tired to check if it might be another routing issue as well.

Just hoping that a new firmware comes out for AC68U soon to eliminate equipment issues being the posibilities, otherwise this is just another expensive dead weight.

I will change back to N66 and try it tonight, hopefully it's AC68... :s8:
 

Binaries

Member
Joined
Apr 1, 2011
Messages
418
Reaction score
0
Hello - New to MR here... Just got my 1 Gbps link yesterday.
Anyone of you has subscribed to MR Static IP, please? I'd like to ask.



What is the Static IP Address range that I will be getting if I subscribed for one?

Will it be directly visible to internet? Or it will still be behind your "giant" firewall?

Currently, I'm assigned a NAT'ed "PUBLIC IP" 172.x.x.x but my DynDNS tells me I'm behind Firewall NAT under 103.x.x.x - so which Static IP will I be getting? The actual that My DynDNS will tell me or still behind Firewall NAT ???


FYI:
NOBODY picks up MR Technical Support Phone, quiet disappointed first impression on MR now!

Thanks for any comment.

Arc. :)

I am on 1GBPS static. IP: 103.241.61.X

Yes you will be directly visible to the internet once you send them your router mac and have them update that on their end. No special settings needed since they will assign your static to you automatically.
 

Just Me

Arch-Supremacy Member
Joined
Jan 1, 2000
Messages
14,249
Reaction score
41
Hello - New to MR here... Just got my 1 Gbps link yesterday.
Anyone of you has subscribed to MR Static IP, please? I'd like to ask.



What is the Static IP Address range that I will be getting if I subscribed for one?

Will it be directly visible to internet? Or it will still be behind your "giant" firewall?

Currently, I'm assigned a NAT'ed "PUBLIC IP" 172.x.x.x but my DynDNS tells me I'm behind Firewall NAT under 103.x.x.x - so which Static IP will I be getting? The actual that My DynDNS will tell me or still behind Firewall NAT ???


FYI:
NOBODY picks up MR Technical Support Phone, quiet disappointed first impression on MR now!

Thanks for any comment.

Arc. :)

The main page of your router setup should display 172.xxx if you're behind MR's internal NAT. On static ip, it will begin with 103.xxx
 

hangyong

Master Member
Joined
May 9, 2002
Messages
3,838
Reaction score
0
I am on 1GBPS static. IP: 103.241.61.X

Yes you will be directly visible to the internet once you send them your router mac and have them update that on their end. No special settings needed since they will assign your static to you automatically.

no need to send them liao... in fact if you log into your MR account, your Static IP page will be masked out and you cannot go in.

the authentication is now on the ONT and no longer the router, so any router plug in, you will get your static IP
 

hangyong

Master Member
Joined
May 9, 2002
Messages
3,838
Reaction score
0
Yeah, will change it back and try when I got home.



Qoo10, todayonline.com, just to name a few...
When I tried funshion site, now it can't even load. Before upgrade it works fine. Taobao.com was working fine too, now it's very slow as well.
One of the slowness is the loading of images, it's like I am back to dialup :o



I will change back to N66 and try it tonight, hopefully it's AC68... :s8:

you try to factory default the AC68 again and update ego latest firmware... then factory reset and try...

then slowly reconfigure your router again...
 

hangyong

Master Member
Joined
May 9, 2002
Messages
3,838
Reaction score
0
Hello - New to MR here... Just got my 1 Gbps link yesterday.
Anyone of you has subscribed to MR Static IP, please? I'd like to ask.



What is the Static IP Address range that I will be getting if I subscribed for one?

Will it be directly visible to internet? Or it will still be behind your "giant" firewall?

Currently, I'm assigned a NAT'ed "PUBLIC IP" 172.x.x.x but my DynDNS tells me I'm behind Firewall NAT under 103.x.x.x - so which Static IP will I be getting? The actual that My DynDNS will tell me or still behind Firewall NAT ???


FYI:
NOBODY picks up MR Technical Support Phone, quiet disappointed first impression on MR now!

Thanks for any comment.

Arc. :)

from what I understand... you may not be able to get your static IP set up on the first few days after activation.

This is what I was told during my installation 2 weeks back...

Actually about this part, I not to happy that it was not mentioned during signup for the beta...

but somehow, I was able to get my IP address almost immediately after all my initial issues were solved.
 
Status
Not open for further replies.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top