MyRepublic fibre - Part 4

Status
Not open for further replies.

imacbie

Supremacy Member
Joined
Jul 3, 2004
Messages
6,405
Reaction score
2
after probably like half a day?...
anyway i just factory reset my router AGAIN .. lol
and speed is back to normal. lets see does it still maintain tomorrow

sidenote...
netflix is having issue with chromecast .. grrrrrr!! can't stream for the past few nights.. !!
 

aptget

Supremacy Member
Joined
May 6, 2001
Messages
8,427
Reaction score
1
u guys scaring me now...

after waiting patiently, my installation date is tomorrow 4-april

wa liaooo... i took leave and if delay, i shiok myself the whole day :/
 

roxas93

Senior Member
Joined
Jul 10, 2011
Messages
1,864
Reaction score
0
I still haven't get my call for appt since the day I signed it on it show please look into it.thanks.
Application number e200000173
 

wilflare

Supremacy Member
Joined
Jun 1, 2002
Messages
9,903
Reaction score
25
http://dlcdnet.asus.com/pub/ASUS/wireless/RT-AC68U/FW_RT_AC68U_30043744887.zip

Hi guys, pls download the above firmware for AC68.


Plug out every single cable, reset your router. and plug in one by one. If there's slow speed connection for that particular PC/Laptop. Kindly change to another cable and see if the speed will improve. Also try changing the ports and see if there's any improvement.

I notice that changing the cable improve my speed by 30-50Mbps, as cable over the years may wear down.

Thanks!

As for N66. Kindly give me a while more to look for the most suitable firmware to be used.

Meanwhile Asus is busy fixing the various routers.

updated to this sometime back... still having issues with
WiFi - outlined in my quote below
Slow connection (timeouts, etc) on Facebook, Twitter, etc

Decided to update to latest beta firmware from ASUS
Reset to Factory Default.
Restarted ONT + Router as well

Wired, Direct to Router speeds returned to normal.
Except for the following error on Chrome (used to happen even on previous PURE + EnGenius)
"408 Request Time-out Your browser didn't send a complete request in time." - especially for NeoGAF.com

Issues with PlayStation 3 (Wired)
Internet Connection Test: -/- Download and Upload. With error message that says "The router in use may not support IP fragments, and the communication features of some games may be restricted. For details, contact the router manufacturer"
*This did not happen with PURE + EnGenius

Still having issues with WiFi performance
On Note3 (connected via 5GHz)
Instagram - News Feed does not load, loading spinner just keeps spinning. (News Feed works fine on 4G, NUS WiFi)

OOKLA Speedtest.net (app) - 233 Download, 0 Upload (test just gets stuck at 0 Upload, test does not complete)

WhatsApp - Cannot upload/send images but can receive

PlayStation Vita - Based on Internet Connection Test, 33.4 Mbps Download, 146.2 kbps Upload.
Test says "The router in use may not support IP fragment packets, and some network features of your PS Vita system may be restricted. For details, contact the router manufacturer.

*all these WiFi issues did not occur during PURE + EnGenius setup
can't help but feel that these issues are all specific to the AC68U :/
wonder how long it'll take for Asus to fix the router :/

having really slow connections to
Twitter.com/Tweetdeck.com
Facebook.com
Instagram News Feed
 

henrylim1972

Senior Member
Joined
Jul 4, 2011
Messages
1,355
Reaction score
0
same issue as me lor.
900+ initially, then drop and stay at 200+

The interesting thing is that MR technician swapped out the ONT and the results remained the same. It clearly points to the firmwares of the router. I can't sustain the speed for N66U - hit 800+ and tapers off on merlin 37.40 (?). I decided to flash Tomato Shibby ARM version ( beta) onto AC68U and fingers crossed ... it looks promising so far ... getting 860-890 so far .. will be testing over the weekend...

FINGERS CROSSED ... ( neeed sleep )

PS: How do you use JFFS ? Thanks
 
Last edited:

xistence

Member
Joined
Aug 15, 2006
Messages
111
Reaction score
0
This is frustrating.

I can't send images on whatsapp. My speed going through router on wired cables is less than 100.

I already tried latest official firmware. Merlin's alpha4 firmware for AC68U.
 

aptget

Supremacy Member
Joined
May 6, 2001
Messages
8,427
Reaction score
1
guys, am I suppose to receive an email regarding installation ? Installation is today 4-april.

If I did not receive any email , and there was no call to confirm on the actual day, am I safe to say there won't be an installation ?

MR staff ? can help answer ?

ID : C1005644
 

ChiefShooter

Junior Member
Joined
Feb 22, 2012
Messages
96
Reaction score
0
Dear MR folks,

MR completed my fibre installation yesterday. However i cannot performed upload with speed test. The technician reported my issue but still no update from MR. Also, I have requested for teleport but not working. Checked my DNS settings already.

Anyone can shine some lights on this?

Thanks.
 

aptget

Supremacy Member
Joined
May 6, 2001
Messages
8,427
Reaction score
1
guys, am I suppose to receive an email regarding installation ? Installation is today 4-april.

If I did not receive any email , and there was no call to confirm on the actual day, am I safe to say there won't be an installation ?

MR staff ? can help answer ?

ID : C1005644

wow, you guys were right. MR came over to check BUT Opennet did not switch over the signal.

OpenNet AGAIN .....

on the bright side, MR came as scheduled. Nice fella after talking to him
 

imacbie

Supremacy Member
Joined
Jul 3, 2004
Messages
6,405
Reaction score
2
ah u're trying out new fws.
right, mine is maintaining at 900 odds this morning gotta observe.

not sure on the rest.
on merlin, just enable it, check to have it reformat on next reboot, reboot router, uncheck to have it reformat on next reboot, reboot. there u go.
just ssh into your router and there be folders in ur jfss partition
 

imacbie

Supremacy Member
Joined
Jul 3, 2004
Messages
6,405
Reaction score
2
wow, you guys were right. MR came over to check BUT Opennet did not switch over the signal.

OpenNet AGAIN .....

on the bright side, MR came as scheduled. Nice fella after talking to him
at least now u see who is causing the problems aye.
 

elimmel

Arch-Supremacy Member
Joined
May 25, 2006
Messages
17,181
Reaction score
6,002
My installation was completed yesterday.
Wired connection to PC 15m away on cat6 ard 800+
Wireless around 100+ in same location (1wall).
Wireless up to nearly 200 when within 5m of router.
Teleport, home voice and static ip all working.
Using latest official FW for ac68.
Figures should be reasonable right?

Oh yes. MR kept calling me to update status even though I couldn't answer the phone. Had at least 7 missed calls. MR engineer was patient and explained a lot of basic things to my parents who were home for the installation. Good experience with MR again. Can't say the same for ON.
 
Last edited:

xistence

Member
Joined
Aug 15, 2006
Messages
111
Reaction score
0
My installation was completed yesterday.
Wired connection to PC 15m away on cat6 ard 800+
Wireless around 100+ in same location (1wall).
Wireless up to nearly 200 when within 5m of router.
Teleport, home voice and static ip all working.
Using latest official FW for ac68.
Figures should be reasonable right?

Oh yes. MR kept calling me to update status even though I couldn't answer the phone. Had at least 7 missed calls. MR engineer was patient and explained a lot of basic things to my parents who were home for the installation. Good experience with MR again. Can't say the same for ON.

Hi, can share your router model?
 

Zerath

Junior Member
Joined
Aug 14, 2010
Messages
20
Reaction score
0
is it just me or is the China "Magic" is happening ?!?!
i've noticed vast improvement for China sites today.
Previously baiduyun was barely downloadable.. <1KBps...now i see speed like >2MBps
streaming sites and taobao improves greatly too.
My usage comprises of like 90% china sites and this is really great news!
Have to give credits when it is due, and hopefully this is sustainable...
keeping my fingers crossed!
 

macluver

Member
Joined
Apr 30, 2007
Messages
463
Reaction score
15
i'm now waiting for MR to call me for an installation appointment. Currently having singnet 300mbps plan on port 2. Gg to install MR on port 1 as a second internet connection. Do i have to wait for ON to do something on my fibre point? or ON just need to open up port 1 for MR to come and install?
 

hangyong

Master Member
Joined
May 9, 2002
Messages
3,838
Reaction score
0
is it just me or is the China "Magic" is happening ?!?!
i've noticed vast improvement for China sites today.
Previously baiduyun was barely downloadable.. <1KBps...now i see speed like >2MBps
streaming sites and taobao improves greatly too.
My usage comprises of like 90% china sites and this is really great news!
Have to give credits when it is due, and hopefully this is sustainable...
keeping my fingers crossed!

ever wonder why the speed of 1gbps lines to HK is over 400mbps?
thing is China firewall is very adaptive and changes quickly
 

bovi77

Member
Joined
Jun 20, 2012
Messages
147
Reaction score
0
is it just me or is the China "Magic" is happening ?!?!
i've noticed vast improvement for China sites today.
Previously baiduyun was barely downloadable.. <1KBps...now i see speed like >2MBps
streaming sites and taobao improves greatly too.
My usage comprises of like 90% china sites and this is really great news!
Have to give credits when it is due, and hopefully this is sustainable...
keeping my fingers crossed!

+1
56.com streaming well today. yesterday was horrible.
 

eriol125

Senior Member
Joined
Aug 19, 2006
Messages
2,090
Reaction score
5
Dear Myrepublic,

Today is 4th of April, my appointment is on the 8th of April. You called and confirmed my appointment twice for 8th of April. And today you made your tech, Mr Azahari came to my house.

Can Myrepublic get a grip of the situation here? Giving your tech the wrong appointment date?! Seriously?! MR should know that you also need to have liaise with OpenNet on the same day for the internet to be connected.

Anyway I would like to praise Mr Azahari for coming all the way here, for nothing. So please don't go blame your installation staff for being late for other installations. The people in the office gave the man on the ground the wrong date, made them waste their time for nothing.

And lastly, I hope there will be no such stunt on 8th April.

Cust ID : C1007412
 

xistence

Member
Joined
Aug 15, 2006
Messages
111
Reaction score
0
Oh. sorry. Missed that out.

I used the CAT6 original cable given by MR to connect from ONT to my laptop.

Result is 95.05Mbps download and 10.07Mbps for upload.

Tell me how I fare... ?
 
Status
Not open for further replies.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top