MyRepublic fibre - Part 4

Status
Not open for further replies.

wilflare

Supremacy Member
Joined
Jun 1, 2002
Messages
9,903
Reaction score
25
bro! i was so happy when speedtest decided to upload when i lowered my MTU somemore this morning.
but happiness was short-lived.

the test went thru once and hung subsequently lol!

I guess we can only wait patiently :/
I hope my mobile dataplan holds up in the meanwhile xD
 

Boltersdriveer

Senior Member
Joined
Aug 8, 2010
Messages
1,862
Reaction score
0
hi i am new to Fibre and just got installation yesterday.

I noticed that the alcatel-lucent termination box has extra LAN ports behind. Is it a hub or something that we can connect other devices to it or are we only able to use just 1 port to uplink to the router instead?

because i was thinking of putting my router at another place and connecting my other devices like PS3 to the ONT ports

No. Only 1 port is active on the Alcatel-Lucent device.

Bolts
 

Boltersdriveer

Senior Member
Joined
Aug 8, 2010
Messages
1,862
Reaction score
0
Oh yes, I'd like to know too. The engineer did not collect my MR ONT and home voice adaptor when he came to install the 1GB. He said will check with MR and get back to me.
Nothing from him yet. Wait kena fine by MR how?
MR, can check pls.
C1002866. Thanks

By right, if you have no other active NC services (SH, SI etc.) and your old 100/150Mbps speed is no longer active, the ATA and the ONT should be collected back. We'll check for you.

Bolts
 

henrylim1972

Senior Member
Joined
Jul 4, 2011
Messages
1,355
Reaction score
0
Whoever has N66U - could you share your settings to achieve the optimal 1 GBps? A bro on the forum said it works fine for merlin (374.40) but I used it and I am capped at 300 Mbps. Did you
a) set your SSID
b) what channels did you use for 2.4 / 5 Ghz?
c) Did you set WPA2 Personal?

Thanks !!
 

queks

Senior Member
Joined
Oct 12, 2000
Messages
1,994
Reaction score
3
I would like to know what happen to my installation. MR guy came and left without install last friday. Say signal never cut, will check with company again. After that no more news. Superb "customer service".
Waste my 1 full day. Not sure if MR thinks that all their customer seat around and do nothing. Customer all too free and too much spare time to waste....I am not getting free service here. I am PAYING for the service. Have some min. professionalisim at least for goodness sake.

CustNo: C1003429
 

Tiny potato

Supremacy Member
Joined
Oct 4, 2012
Messages
7,925
Reaction score
3
I would like to know what happen to my installation. MR guy came and left without install last friday. Say signal never cut, will check with company again. After that no more news. Superb "customer service".
Waste my 1 full day. Not sure if MR thinks that all their customer seat around and do nothing. Customer all too free and too much spare time to waste....I am not getting free service here. I am PAYING for the service. Have some min. professionalisim at least for goodness sake.

CustNo: C1003429

Common MR issue lah.
Rest of us complaining here.

http://forums.hardwarezone.com.sg/next-generation-broadband-network-ngbn-forum-320/myrepublic-big-launch-4539844-145.html
 

Just Me

Arch-Supremacy Member
Joined
Jan 1, 2000
Messages
14,249
Reaction score
41
Whoever has N66U - could you share your settings to achieve the optimal 1 GBps? A bro on the forum said it works fine for merlin (374.40) but I used it and I am capped at 300 Mbps. Did you
a) set your SSID
b) what channels did you use for 2.4 / 5 Ghz?
c) Did you set WPA2 Personal?

Thanks !!

a) Yes
b) 9 for 2.4/157 for 5 (actually depends on your wireless neighborhood, I use 9 as it's the least utilized channel)
c) Yes
 
Last edited:

xRenol

Supremacy Member
Joined
Dec 27, 2011
Messages
7,243
Reaction score
194
Whoever has N66U - could you share your settings to achieve the optimal 1 GBps? A bro on the forum said it works fine for merlin (374.40) but I used it and I am capped at 300 Mbps. Did you
a) set your SSID
b) what channels did you use for 2.4 / 5 Ghz?
c) Did you set WPA2 Personal?

Thanks !!

Are you capped at 300Mbps on wired or wireless connection?
 

misato

Supremacy Member
Joined
Jan 1, 2000
Messages
6,148
Reaction score
0
I would like to know what happen to my installation. MR guy came and left without install last friday. Say signal never cut, will check with company again. After that no more news. Superb "customer service".
Waste my 1 full day. Not sure if MR thinks that all their customer seat around and do nothing. Customer all too free and too much spare time to waste....I am not getting free service here. I am PAYING for the service. Have some min. professionalisim at least for goodness sake.

CustNo: C1003429
I gotten the same treatment as well.. 2 weeks to date nothing done.
 

henrylim1972

Senior Member
Joined
Jul 4, 2011
Messages
1,355
Reaction score
0
a) Yes
b) 9 for 2.4/157 for 5 (actually depends on your wireless neighborhood, I use 9 as it's the least utilized channel)
c) Yes

1.Thanks - I was referring to the 20/40 Mhz setting for 2.4 and 5 Ghz ? Could you share ?

2. What's your TX power as well?
 

xistence

Member
Joined
Aug 15, 2006
Messages
111
Reaction score
0
Any solution for the whatapp picture cannot upload issue?

can anyone upload/send photos on facebook on android mobile? or only just me having this issue?

Hi,

I also experienced the same problem when MR first installed for me. I think for the first 2 days I couldn't send images on Whatsapp.

THEN, out of a sudden, one day, it just works. And until now, today is the 4th day that I am using MR, it is still working. I seriously don't know why.

-----------------

So the other day I was saying that my speed was slow. Barely reaching 100Mbps (Usually about 90+ only). I have to admit that my computer is a bit old and rusty.

Last Saturday, I went to Simlim and got myself a new computer and a Non-china brand CAT6 cables 30 meters. Cost me SGD1.20 per meter. With this combination, I am hitting ~950Mbps on almost every test on Http://speedtest.myrepublic.com.sg. Never less than 900Mbps. Hope this continues.

My setup is from Wall -> ONT -> ASUS RT68U Router -> Wired CAT6 cable -> My PC.

I am not telling everyone who is having low speed to go get a new computer but I think many variables are at play here.

My issue now is the wifi signal is horribly low. When I am in the room, my wifi connection drops constantly.
 

bovi77

Member
Joined
Jun 20, 2012
Messages
147
Reaction score
0
Hi,

I also experienced the same problem when MR first installed for me. I think for the first 2 days I couldn't send images on Whatsapp.

THEN, out of a sudden, one day, it just works. And until now, today is the 4th day that I am using MR, it is still working. I seriously don't know why.

-----------------

So the other day I was saying that my speed was slow. Barely reaching 100Mbps (Usually about 90+ only). I have to admit that my computer is a bit old and rusty.

Last Saturday, I went to Simlim and got myself a new computer and a Non-china brand CAT6 cables 30 meters. Cost me SGD1.20 per meter. With this combination, I am hitting ~950Mbps on almost every test on Http://speedtest.myrepublic.com.sg. Never less than 900Mbps. Hope this continues.

My setup is from Wall -> ONT -> ASUS RT68U Router -> Wired CAT6 cable -> My PC.

I am not telling everyone who is having low speed to go get a new computer but I think many variables are at play here.

My issue now is the wifi signal is horribly low. When I am in the room, my wifi connection drops constantly.

keep a watch on which antivirus you install. A reformat & upgrade to win 7 & choice to not install avast antivirus fixed my MR speeds.

good price on your cat6 cable. was this the shop on 2nd floor that custom makes cables?
 

xistence

Member
Joined
Aug 15, 2006
Messages
111
Reaction score
0
At the moment, I did not install any Anti virus and I am running Windows 8.

Sorry I did not mention. I got my cables from Simlim tower instead. Basement level.
Brand is Schneider Electric. Digilink Cat6 UTP Cable.
 

wilflare

Supremacy Member
Joined
Jun 1, 2002
Messages
9,903
Reaction score
25
Merlin is taking a break..
so unlikely any fix from asus is gonna get cooked into his.

I sure hope we don't have to adjust the MTU setting with Asus' bugfix firmware release (whenever that is going to happen)
 
Status
Not open for further replies.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top