Need advice on building a new PC.

JirQUEST

Arch-Supremacy Member
Joined
May 31, 2000
Messages
21,762
Reaction score
0
Hey guys. Am getting a new PC, but totally unsure of whether all the parts will work well together. Also, it doesn't help that I am pretty much a complete noob in hardware. Here are the specs I asked for / was recommended by a shop in SLS:

  • Amd Ryzen 7 3700X Processor
  • (Prism RGB CPU cooler)
  • Asus Tuf gaming X570-Plus Wifi Mb
  • G.Skill Trident Z Neo Rgb 3600Mhz 16GB (CL16)
  • Zotac RTX2070 Super Amp Extreme 8Gb Gpu
  • Adata Spectrix S40G Rgb 1Tb Nvme M.2 Ssd
  • Corsair CX650M 80+ Bronze Modular Psu
  • Deepcool Matrexx 55 Argb TG Mesh High Airflow Casing(3Argb Fans Included)

Any advice on whether I should need to change anything, like the PSU perhaps?

Or any other recommendations on how I can make this current setup work smoothly without any overheating issues etc?

Really appreciate everyone's thoughts here. Thank you!
 

allan55

Junior Member
Joined
Jan 4, 2015
Messages
3
Reaction score
0
The list looks fine, no harm in going to a bigger PSU if you really want, but a 650W will be sufficient. You wont have temp issues with that case.
 

JirQUEST

Arch-Supremacy Member
Joined
May 31, 2000
Messages
21,762
Reaction score
0
Thanks for the response! I eventually changed the PSU to Superflower Leadex III 650W. You are right... temp isn't really an issue.
 

BlackStorm

Member
Joined
Jun 14, 2009
Messages
382
Reaction score
0
Hey guys. Am getting a new PC, but totally unsure of whether all the parts will work well together. Also, it doesn't help that I am pretty much a complete noob in hardware. Here are the specs I asked for / was recommended by a shop in SLS:

  • Amd Ryzen 7 3700X Processor
  • (Prism RGB CPU cooler)
  • Asus Tuf gaming X570-Plus Wifi Mb
  • G.Skill Trident Z Neo Rgb 3600Mhz 16GB (CL16)
  • Zotac RTX2070 Super Amp Extreme 8Gb Gpu
  • Adata Spectrix S40G Rgb 1Tb Nvme M.2 Ssd
  • Corsair CX650M 80+ Bronze Modular Psu
  • Deepcool Matrexx 55 Argb TG Mesh High Airflow Casing(3Argb Fans Included)

Any advice on whether I should need to change anything, like the PSU perhaps?

Or any other recommendations on how I can make this current setup work smoothly without any overheating issues etc?

Really appreciate everyone's thoughts here. Thank you!
have you built your RIG... by which shop. cost how much... I want to built too
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top