Need Help/Advice

leehuaqing

Senior Member
Joined
Dec 7, 2009
Messages
1,844
Reaction score
1
A week ago I had GPU problem which "No Signal detect" from monitor, which is due to my old GPU uplorry-ed.

Now here's the new problem, from Tuesday to Friday evening I did not use the computer as I was in ICT thus I switched off the main switch power supply to CPU & Monitor screen.

At 6pm+ I power on my computer, everything was smooth and I used it till 8pm before shutting it down. On 0300hrs (22/07/17) which is today, I power on the CPU as per normal but less than 2secs it auto off and on (Repeated cycle for 5mins) before it successfully boot up. Before that I tried to boot it to BIOS but unable to do so.

May I know what's the possible fault to this issue I currently having?:s11:
 

leehuaqing

Senior Member
Joined
Dec 7, 2009
Messages
1,844
Reaction score
1
Any beeping sound from ur mobo? That might give us a hint. Also check 24pin and cpu power cable Make sure it's tight

Also can just do a simple paper clip test on ur psu and watch the fan if it's spinning normally, and hear for any obvious sounds coming from Psu that sounds fishy

Well it happened again this afternoon when I attempted to boot up my CPU, same as my first post and took around 5mins for it to boot up successfully.

PSU spinning and no weird sounds, checked all cables no loose connections.

Maybe PSU ....

I don't think so as it's running and spinning w/o making any weird sounds.
 

Parmesean

Senior Member
Joined
Jan 5, 2016
Messages
714
Reaction score
2
Could it be a RAM issue? I had one a while back, with my computer also making beeping noises...

But your computer did startup though....
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top