Need help with my graphics

[Zenzevil]

I just bought a custom build rig and I have a GTX 1070 as shown below.

But my PC is only recognizing the integrated graphics. How do I solve this?

And also, I tried opening NVIDIA control panel and this shows up.

[/IMG]

 

[tigerwoods]

disable the integrated graphics in bios and windows device manager

Thank me later

 

[Zenzevil]

disable the integrated graphics in bios and windows device manager

Thank me later

I disable the integrated graphics in device manager and switch primary display to PCIE in BIOS. Now my dxdiag show n/a.

 

[MianBaoFren]

Are u connected to your gpu or mobo?

Sent from A Cat Who Does Not Need A Reason To Post using GAGT

 

[Zenzevil]

Are u connected to your gpu or mobo?

Actually I think it's connected to the mobo. Anyway when I reboot and went into BIOS again to check, the integrated graphics had reset itself.

 

[LiquidMan]

Actually I think it's connected to the mobo. Anyway when I reboot and went into BIOS again to check, the integrated graphics had reset itself.

I think you may want to connect your display (via HDMI/DVI ) to your graphics card instead of mobo.

The graphics card connector should be lower on behind your CPU not near the USB ports.

 

[RobinTeoHood]

By right just set the gpu to auto in bios. If you plug in mobo, then it will auto detect & switch to integrated graphics. If plug in gpu, then auto gpu. Think you poke wrong hole.

Sent from Sony F5321 using GAGT

 

[Zenzevil]

Okay so I connect my DVI cable to my GPU instead of my mobo. But it's even worst, got to loading screen and then black screen, no start up.

 

[MrMundy]

Uninstall the Nvidia software and driver first then

Reseat ur GPU(take out and plug back)
Reset bios
Connect monitor to GPU
Boot up
Install Nvidia software and drivers

 

[Zenzevil]

It's working fine now, it's my monitor problem. I have to adjust its settings. Thanks guys.