Need help with my new setup (urgent)

[Repunzel]

hi guys ytd i just upgraded partial of my com.

e new setup is :

MB: Asus P8H77M-LE (window 7 compatibilty bought on 11/05/2012) + i5 3450
PSU : ASUS U-65GA 650w
Ram : Avexir core 1600mhz 2 x 4GB (new bought ytd)
GPU : Gigabyte GTX 760 (new bought ytd )


e problem im facing is that after i change out my new GPU n ram, my com got no display not even my mb intergrated graphic. i got no idea what wrong is it compability issue or any thing wrong with e set up?

 

[xkiller213]

try reseating the RAM...

 

[Repunzel]

eh i try a few times resitting e ram n gpu but still same problem. both gpu n intergrated graphic show no display . but to my concern my mb+cpu and psu compatible with my gtx 760 and ram?

 

[nippp0n]

Did you connect your power cables to the gpu?

 

[royfrosty]

Check power cable is it connected to your GPU. Next is what cable are you using to connect the monitor. Dvi or HDMI? Check monitor settings whether got set to HDMI or dvi settings?

 

[Repunzel]

thanks for all e reply. yup i connected the power to gpu, e gpu is using 6pin n 8 pin connector. my psu have 2 x 6pin + 2pin connector. so shuldnt a issue wif the connector i guess.

As for my monitor im using dvi, so doesnt have to switch to hdmi or dvi i guess.

previously my rig was fine ytd before i took out my ram n power colour 7850 to sell off. and went ahead to buy a new 760 n avexir core ram .

hope u guys can help me out. Thanks alot

 

[royfrosty]

thanks for all e reply. yup i connected the power to gpu, e gpu is using 6pin n 8 pin connector. my psu have 2 x 6pin + 2pin connector. so shuldnt a issue wif the connector i guess.

As for my monitor im using dvi, so doesnt have to switch to hdmi or dvi i guess.

previously my rig was fine ytd before i took out my ram n power colour 7850 to sell off. and went ahead to buy a new 760 n avexir core ram .

hope u guys can help me out. Thanks alot

You still need to switch to dvi.

Anw if all fails, best is to return to shop and 1 to 1 exchange.

 

[Clone_]

Reset CMOS?

 

[Repunzel]

hmm e flat battery that reset cmos i tried but seems like nth working too. my intergrated graphic not working also. would it be a possiblity tt e ram fail? or non compatible?

 

[selkies]

Hi, try booting with 1 ram single channel in the 3rd slot. I got the same issue as you no display.

http://forums.hardwarezone.com.sg/hardware-clinic-2/dual-channel-issue-4396724.html

still trying resolve.

 

[Repunzel]

i just checked my mb QVL list doesnt include my avexir core ram in the list. and my Dram LED is Red all e way which i now suspect is my mb not compatible with my ram .. GG need to buy new MB now

 

[fleas1]

try talking to the shop to change rams. say that the rams are not compatible with your motherboard