Newly assembled PC no signal

[KuroI-Kaze]

Monitor indicates no signal after switching on the PC. Motherboard have that error indicator red lights on CPU and dram

Ryzen 5600
ASRock b550m ac
Kingston fury 2x8gb 3600 ddr4
Rtx 4070
Superflower leadex silver 650


Have check all wires and plugs all seated in. Took out and push harder in for the rams, install one ram method all tried still not working. Sian

Pls help

 

[naked123]

Monitor indicates no signal after switching on the PC. Motherboard have that error indicator red lights on CPU and dram

Ryzen 5600
ASRock b550m ac
Kingston fury 2x8gb 3600 ddr4
Rtx 4070
Superflower leadex silver 650


Have check all wires and plugs all seated in. Took out and push harder in for the rams, install one ram method all tried still not working. Sian

Pls help

wriggle your cpu cooler?

 

[tsteo77]

Monitor indicates no signal after switching on the PC. Motherboard have that error indicator red lights on CPU and dram

Ryzen 5600
ASRock b550m ac
Kingston fury 2x8gb 3600 ddr4
Rtx 4070
Superflower leadex silver 650


Have check all wires and plugs all seated in. Took out and push harder in for the rams, install one ram method all tried still not working. Sian

Pls help

Since you checked everything. I think what's left is a bios update. See link below >
https://www.asrock.com/mb/AMD/B550Mac/index.asp#BIOS

 

[KuroI-Kaze]

wriggle your cpu cooler?

Ok I try.

Since you checked everything. I think what's left is a bios update. See link below >
https://www.asrock.com/mb/AMD/B550Mac/index.asp#BIOS

I think my mb bios is updated, there's a p2.50 sticker.

P2.30 or abv can liao right?

 

[xonix]

Ok I try.

I think my mb bios is updated, there's a p2.50 sticker.

P2.30 or abv can liao right?

Bios updates can also add support for dram.

 

[KuroI-Kaze]

Bios updates can also add support for dram.

I can't update .. I have got no signal and mb no bios flash function.

 

[wtfh4x]

Bios updates can also add support for dram.

TS can't even update the bios cos there's no BIOS flashback on ASRock B550.

 

[NightRaven49]

i think best to take the mobo back to the shop where u bought it from and ask them help troubleshoot, assuming u bought from sls. most shops should provide this kind of service within the first 2 weeks of purchase.

in the meantime maybe try to check for any bent pins and reseat the cpu.

 

[xonix]

I can't update .. I have got no signal and mb no bios flash function.

Bring back to shop that you bought it from and ask for help to update it.

 

[86technie]

Proably DOA board bring back to the shop and get a exchange.

 

[deepblue_82]

since just brought,,, faster go back shop and ask for help within 7-14 help is free

 

[KuroI-Kaze]

i think best to take the mobo back to the shop where u bought it from and ask them help troubleshoot, assuming u bought from sls. most shops should provide this kind of service within the first 2 weeks of purchase.

in the meantime maybe try to check for any bent pins and reseat the cpu

My parts all from different places bought online

Cpu pin looks fine and have tried reseating it le.

Bring back to shop that you bought it from and ask for help to update it.

Proably DOA board bring back to the shop and get a exchange.

Ya .. my last resort. I in the west, tech dynamic in the east

 

[Daty41]

Clear CMOS? Try onboard graphics (since u done Dimm). Do it before checked CPU and cooler fan.. Anyway i chked ur board FAQ.. After chk for short, next step is clear CMOS...

 

[hlots123]

Monitor indicates no signal after switching on the PC. Motherboard have that error indicator red lights on CPU and dram

Ryzen 5600
ASRock b550m ac
Kingston fury 2x8gb 3600 ddr4
Rtx 4070
Superflower leadex silver 650


Have check all wires and plugs all seated in. Took out and push harder in for the rams, install one ram method all tried still not working. Sian

Pls help

try remove gpu, then boot with 1 stick of ram in A2 slot - to see if red lights any change

 

[deepblue_82]

Clear CMOS? Try onboard graphics (since u done Dimm). Do it before checked CPU and cooler fan.. Anyway i chked ur board FAQ.. After chk for short, next step is clear CMOS...

i dont think he has onboard graphics

 

[poooooo]

What's the possibility is that bios can't boot because bios select the pice to run at 3.0 instead of 4.0

Or just bring whole system to nigel to diagnose

 

[KuroI-Kaze]

Hi all,

I took my system to a builder's place to test. It's MB DOA

TMR going down to TD for them to test and exchange. Siann very far.

 

[deepblue_82]

ah yes yes nigel will help.... if u go there early u could get your pc back in 2 hrs

 

[deepblue_82]

Hi all,

I took my system to a builder's place to test. It's MB DOA

TMR going down to TD for them to test and exchange. Siann very far.

wow... this one super sian.........

 

[hlots123]

Hi all,

I took my system to a builder's place to test. It's MB DOA

TMR going down to TD for them to test and exchange. Siann very far.

how did he test?