pc cannot be turn on properly

Jon Bovk

Junior Member
Joined
Jan 1, 2011
Messages
13
Reaction score
0
Hi guys,

My PC cannot be turn on by the power button on the chassis. But it can be turn on by switching on and off the power point very quickly.

Can anyone help me remedy the problem?

Thanks :)
 

royfrosty

High Supremacy Member
Joined
Jul 23, 2009
Messages
27,727
Reaction score
1,553
Hi guys,

My PC cannot be turn on by the power button on the chassis. But it can be turn on by switching on and off the power point very quickly.

Can anyone help me remedy the problem?

Thanks :)

Check the power wire whether is it connected properly to the mobo
 

AC2

Senior Member
Joined
Sep 18, 2002
Messages
1,050
Reaction score
1
Hi, I had the same problem last month with seasonic psu as well, my guess is that your psu circuit board is damaged during some blackout or surge. Just bring your psu for rma.

The PSU can still work if you off/on the switch at the PSU very quickly + the ON button from your casing. However I think in long run it will damage your psu somehow. Best solution is to rma it.
 

Jon Bovk

Junior Member
Joined
Jan 1, 2011
Messages
13
Reaction score
0
Check the power wire whether is it connected properly to the mobo

Casing switch maybe faulty.

Went to check it, looks fine.

Hi, I had the same problem last month with seasonic psu as well, my guess is that your psu circuit board is damaged during some blackout or surge. Just bring your psu for rma.

The PSU can still work if you off/on the switch at the PSU very quickly + the ON button from your casing. However I think in long run it will damage your psu somehow. Best solution is to rma it.

thanks for your advice. i'll probably go and rma it. :)
 

ordway

Senior Member
Joined
Jul 10, 2000
Messages
2,159
Reaction score
0
easiest way to check if the power switch is faulty is to remove the header on the motherboard. Then try to jump start by connecting the two pins with a conductor, maybe like the tip of a screwdriver. If it does power on, means its the case switch.

If it doesn't, use a paperclip test. If it does power on, means its not the psu and probably motherboard.

If it doesn't power on even with the paperclip test, probably the psu.
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top