pc spoil, wat to do

BUBUBU

Junior Member
Joined
Dec 11, 2015
Messages
76
Reaction score
0
bought this rig from pc theme 2 month ago
now cannot power up

just now went to near my house pc shop to repair
he say should be mb spoil ask me go back sim lim since i have warranty
he also tell me act blur dont tell them i touch anything

so wat i do next?
go pctheme
or go asus for rma?(my mb is asus)


edit
the shop near my house already tested with his own psu etc
 
Last edited:

shadow84

High Supremacy Member
Joined
Apr 15, 2009
Messages
34,288
Reaction score
420
If its pass 7 days, all RMA should go to distro, not the shop that you had purchased from. That pc repair shop shld just close down.

You can google for asus service centre, it should be the one at kallang.

Do the paper clip test on ur psu to see if its working fine. Youtube it. If its fine, remove ur gpu and test ur com. Make sure to plug cable to mobo rear port.
 

zzzzzzz

High Supremacy Member
Joined
Dec 17, 2004
Messages
48,836
Reaction score
11,024
try isolating the fault first

take out graphics card and boot with integrated graphics
if u have 2 sticks of ram try booting with one stick and try all the ram slots and both stick of ram individually
if still cannot, take out graphics card and ram and try if it boots
try booting with spare power supply
if after doing the above still cannot, likely is motherboard already
:(
 

shadow84

High Supremacy Member
Joined
Apr 15, 2009
Messages
34,288
Reaction score
420
Shouldn't we be reporting this to commach or the mods, since trolling is not allowed in HWZ?

Iirc, he kena t ban a few times by mod before. Then he toned down a little... Best to just take note of his nick and ignore him bah.
 

BUBUBU

Junior Member
Joined
Dec 11, 2015
Messages
76
Reaction score
0
If its pass 7 days, all RMA should go to distro, not the shop that you had purchased from. That pc repair shop shld just close down.

You can google for asus service centre, it should be the one at kallang.

Do the paper clip test on ur psu to see if its working fine. Youtube it. If its fine, remove ur gpu and test ur com. Make sure to plug cable to mobo rear port.

the shop near my house already tested with his own psu etc

about asus service centre
can i bring my whole pc thr or just mb?
i dont know how dissemble
 
Last edited:

lunarsong

Senior Member
Joined
Mar 17, 2008
Messages
1,711
Reaction score
1
ram and gfx spoil, go RMA still can fix back very easily

MB is on a whole new level, have to dismantle everything first then put back again

that's the headache, if not just send to any shop who is willing to do for u

can PM me if you need, i have a contact
 
Last edited:

zenniz

Senior Member
Joined
Feb 23, 2008
Messages
1,189
Reaction score
0
the shop near my house already tested with his own psu etc

about asus service centre
can i bring my whole pc thr or just mb?
i dont know how dissemble

Sadly, you can only bring the mb with box and receipt which you have to dismantle
 

BUBUBU

Junior Member
Joined
Dec 11, 2015
Messages
76
Reaction score
0
Sadly, you can only bring the mb with box and receipt which you have to dismantle

so how?

i go back to the shop, ask him dismantle for me, leave it thr , then i go rma, after that he assemble back for me?
 

Allanlee82

Senior Member
Joined
Dec 10, 2009
Messages
1,450
Reaction score
10
so how?

i go back to the shop, ask him dismantle for me, leave it thr , then i go rma, after that he assemble back for me?

like that maybe he will charge some kopi money ba
bring to him if you really dont know
 

jayz89

Supremacy Member
Joined
Dec 21, 2009
Messages
5,995
Reaction score
285
go distributor ba usually.

or just call them up and ask

my mobo recently uplorry too after 2 years but yours just 2 month nia sibei unlucky sia
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top