please help looking for a desktop case.

T

terryhoho

Senior Member
Joined
Apr 23, 2006
Messages
1,541
Reaction score
0
desktop dimension requirement :
20cm width x 30cm depth x height as short as possible.

Micro ATX or ATX case to use parallel.
all ITX board no parallel port.

if you know let me know thanks!
 
MoneyFace =p

MoneyFace =p

High Supremacy Member
Joined
Dec 17, 2010
Messages
35,380
Reaction score
402
terryhoho said:
desktop dimension requirement :
20cm width x 30cm depth x height as short as possible.

Micro ATX or ATX case to use parallel.
all ITX board no parallel port.

if you know let me know thanks!
Click to expand...
In Win BK644 @ $103..............

1385964530GAMS51.jpg

1382691854H5R3G1.jpg

BK644_BK-Series_Corporation IN WIN | CORPORATE

323(H) x 140(W) x 276(D) mm (12.5L)
 
T

terryhoho

Senior Member
Joined
Apr 23, 2006
Messages
1,541
Reaction score
0
There's another casing also quite small.


Headway FU-1B.

PSU is slot in the middle.
Although it supports ATX motherboard, but don't get a board width too wide. You might have some challenge putting the board in.
It has
1 x 5.25" bay
1 x 3.5" bay/ 5.25" bay (convertible) (Can put a 3.5" USB 3.0 Bracket here)
1 x 3.5" bay
1 x 3.5" internal hdd mounting holes on the base.
2 x 80mm fan bracket
2 x USB 2.0 in front.
1 x audio and mic port in front

The orientation of the PSU made the depth of the casing smaller than inWin 644.
can consider if you want something short.

The casing come with 2 pieces of metal piece, which till now i haven't figure out what is it for???? lol
 
Y

ykgoh

Master Member
Joined
Jan 1, 2000
Messages
2,782
Reaction score
0
terryhoho said:
There's another casing also quite small.


Headway FU-1B.

PSU is slot in the middle.
Although it supports ATX motherboard, but don't get a board width too wide. You might have some challenge putting the board in.
It has
1 x 5.25" bay
1 x 3.5" bay/ 5.25" bay (convertible) (Can put a 3.5" USB 3.0 Bracket here)
1 x 3.5" bay
1 x 3.5" internal hdd mounting holes on the base.
2 x 80mm fan bracket
2 x USB 2.0 in front.
1 x audio and mic port in front

The orientation of the PSU made the depth of the casing smaller than inWin 644.
can consider if you want something short.

The casing come with 2 pieces of metal piece, which till now i haven't figure out what is it for???? lol
Click to expand...

Can share peekture of FU-1B? Googled online but no image found.
 
You must log in or register to reply here.
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top