Problem with H100i

[tjiax1]

Anyone having problem with the led on the h100i? Mine keep changing from any colour to yellow. The firmware is the latest 1.0.7. And where to buy extra screw for h100i to do push pull.

 

[jedi5diah]

do you mean when you tune corsair link it does not change accordingly?

screws you can check with the distributor or scout hardware shops

 

[monikernemo]

Screws find at simlim tower. Should be 2.5cm long screws the thread size can check around.

Sent from microwave oven using GAGT

 

[koroshiya8]

i have led problem but with H80i.. always stay at pink until i give up.

 

[tjiax1]

I am using the temp to change the led colour. I set it to white->orange->red. But every time i cold boot my pc, it will start as yellow. Then i go to the link software to change the colour back to white, but it will stay yellow. Then i change it to other colour, it will add yellow in it like blue+yellow, green+yellow. It will sometime randomly change back to normal colour(not +yellow).
When my pc load is heavy and the led colour change to match it(white->orange->red) and when low load(red->orange->), it will change back to yellow instead of white.

 

[alifffresto]

Got play around with gedit?

Sent from Samsung SM-N9005 using GAGT

 

[tjiax1]

what is gedit?

 

[alifffresto]

Ps not gedit... that one linux... i mean regedit... u try google regedit h100i... make sure backup settings first...

Sent from Samsung SM-N9005 using GAGT

 

[sglords]

Screw is 6/32 30mm length.

 

[localITguy]

Ps not gedit... that one linux... i mean regedit... u try google regedit h100i... make sure backup settings first...

Sent from Samsung SM-N9005 using GAGT

vim la, wim better or nano

 

[alifffresto]

Vim ah... dunno leh... using sublime... still noob...

Sent from Samsung SM-N9005 using GAGT

 

[localITguy]

Vim ah... dunno leh... using sublime... still noob...

Sent from Samsung SM-N9005 using GAGT

nano is easy to use

i also rusty riao, very long never touch. also ish noob