Ram issue ? Booting problem

[TheCaffeEspresso]

Sometimes my CPU will be unable to boot up

when I power up will have beep beep sound

I have to resit the ram multiple times in order for it to work.

only got one stick of 8gb ram

Sent from 35,000 ft above sea level using GAGT

 

[ZrE0_Cha0s]

may i ask is the sound error beep is it a ram issues? well if u have tried all slots den most probably ur ram is spoil.

 

[TheCaffeEspresso]

may i ask is the sound error beep is it a ram issues? well if u have tried all slots den most probably ur ram is spoil.

need to resit the ram alot time lor. den after multiple tries will eventually okay

not sure isit ram issue but I think is

Sent from 35,000 ft above sea level using GAGT

 

[ZrE0_Cha0s]

need to resit the ram alot time lor. den after multiple tries will eventually okay

not sure isit ram issue but I think is

Sent from 35,000 ft above sea level using GAGT

maybe if that one time its working test with this software : http://www.memtest.org/

 

[hlots123]

use a soft pencil eraser, rub clean the ram's golden contact regions...

 

[TheCaffeEspresso]

use a soft pencil eraser, rub clean the ram's golden contact regions...

tried before like don't really help

Sent from 35,000 ft above sea level using GAGT

 

[TheCaffeEspresso]

maybe if that one time its working test with this software : http://www.memtest.org/

whats the use?

Sent from 35,000 ft above sea level using GAGT

 

[ZrE0_Cha0s]

whats the use?

Sent from 35,000 ft above sea level using GAGT

to test if its really ram issues or ur mobo ram slots issues.

 

[TheCaffeEspresso]

to test if its really ram issues or ur mobo ram slots issues.

thanks will try if possible

Sent from 35,000 ft above sea level using GAGT

 

[hlots123]

tried before like don't really help

try rub harder lol, to test jus in case... gl!

 

[Encrypted11]

I had a RAM 1-3-3-1 issue with one of my laptop's motherboard last time. It took a lot of reseating work to get the RAMs to post if touched. These are working RAMs btw.

Eventually I took out the board, used a hair dryer blow it on maxed heat all over for about 5 minutes, it solved the issue for me on the next reseating attempt. Suspect its a poor solder that had been reflowed from the hair dryer heating.

An experimental and scientifically unproven method.

 

[localITguy]

your 32$ SSD jin satki~~

 

[Mach3.2]

I had a RAM 1-3-3-1 issue with one of my laptop's motherboard last time. It took a lot of reseating work to get the RAMs to post if touched. These are working RAMs btw.

Eventually I took out the board, used a hair dryer blow it on maxed heat all over for about 5 minutes, it solved the issue for me on the next reseating attempt. Suspect its a poor solder that had been reflowed from the hair dryer heating.

An experimental and scientifically unproven method.

hair dryer reflow solder LOL

 

[Encrypted11]

hair dryer reflow solder LOL

Also a known workaround on PCB stuffs on the internet haha.

 

[TheCaffeEspresso]

try rub harder lol, to test jus in case... gl!

thanks but my friend mention is power supply issue
abit not possible right?

Sent from 35,000 ft above sea level using GAGT

 

[ZrE0_Cha0s]

thanks but my friend mention is power supply issue
abit not possible right?

Sent from 35,000 ft above sea level using GAGT

Still possbile but hard to say as we not so sure is it really no power to boot up your PC.

 

[TheCaffeEspresso]

any idea kingston ram go service centre isit 1 to 1 exchange on the spot?

Sent from 35,000 ft above sea level using GAGT

 

[Kennedy]

any idea kingston ram go service centre isit 1 to 1 exchange on the spot?

Sent from 35,000 ft above sea level using GAGT

they will test your ram for errors, so you have to wait a while before the 1 to 1 exchange on the spot.

 

[ZrE0_Cha0s]

any idea kingston ram go service centre isit 1 to 1 exchange on the spot?

Sent from 35,000 ft above sea level using GAGT

depends on product availability, but most of the time they clean the contact and test your ram 1st and if they have they replace, if nope will be sending to kingston to help u fix the issues.