Recommend a server for running free ESXi

nicholaslee

High Supremacy Member
Joined
Aug 9, 2003
Messages
28,711
Reaction score
14
Dear experts,

I need to purchase a server to install ESXi 5.5 (free version).

The specs I require is a minimum of 8GB RAM, 4-6 cores CPU, 1000GB HDD.

Which brand of 1U server is recommended and cost effective?

Thank you very much in advance!

Nicholas
 

darkarn

Arch-Supremacy Member
Joined
Mar 30, 2005
Messages
10,626
Reaction score
186
What's your budget like? Also, what are you using the server for, cos the uses e.t.c. can affect greatly what parts you need (e.g. VT-d if need to dedicate certain periperals to certain VMs).
 
Last edited:

Jiraya

Master Member
Joined
Mar 10, 2005
Messages
2,943
Reaction score
0
Do check out that the drivers works before venturing. Else check out the HP G8 Microservers.
 

darkarn

Arch-Supremacy Member
Joined
Mar 30, 2005
Messages
10,626
Reaction score
186
Microservers are good cos of:
  • their out-of-band capability (i.e. HP iLO)
  • small physical size
  • low power usage
  • somewhat cheap if willing to ship from Germany or get from a certain user here ;)

but only caveats are that:
  • they are using technology that is at least 3 generations old (Ivy Bridge)
  • do not have VT-d unless willing to upgrade to specific CPUs (that are hard to get cos quite old and mobo/PSU quite picky; go check out HomeServerShow's threads on this issue)
  • hard to expand RAM cos only two slots and can only take in ECC RAM and once again, mobo quite picky (i.e. cannot take in 16GB sticks, only 8GB sticks, therefore max RAM is 16GB).

More details: http://homeservershow.com/forums/index.php?/topic/5639-proliant-microserver-gen8-links/

http://homeservershow.com/forums/index.php?/topic/6596-hp-microserver-gen8-processor-faq/

Really need to consider all these if going for an ESXi build, especially the RAM and I agree with Jiraya, need to consider the drivers too cos ESXi can get picky too (e.g. NICs' drivers, which is why most people recommend using Intel's NIC cards over Realtek's onboard NIC for example).
 
Last edited:

nicholaslee

High Supremacy Member
Joined
Aug 9, 2003
Messages
28,711
Reaction score
14
I'm not too familiar with these.. Thats why looking for an off the shelve model that is fully verified by DELL or HP that is compatible. Need VT-d, I remembered a VM I install prompted this when running with VM workstation..
 

darkarn

Arch-Supremacy Member
Joined
Mar 30, 2005
Messages
10,626
Reaction score
186
Hmm... Have you checked with ESXi compatibility list? I think their website has such a list stating which servers/components work with ESXi. If need be, ask Dell or HP Singapore directly for help too since they know their machines the best but it may get too pricey for you, depending on budget.

That said, there are many people who are using stuff not on the list but got ESXi to work too. There are people who even build their own servers too to fit their own budget and use case (i.e. "whitebox" builds).
 

gld998

High Supremacy Member
Joined
Feb 21, 2008
Messages
38,720
Reaction score
2,482
Currently running VMware ESXi 6/5.5 farm. Just get a 2nd hand x79 with 8 dimms motherboard. If u planning to get a real server, pls extend your warranty to 3 years. The repair can kill your pocket
 

gld998

High Supremacy Member
Joined
Feb 21, 2008
Messages
38,720
Reaction score
2,482
Dear experts,

I need to purchase a server to install ESXi 5.5 (free version).

The specs I require is a minimum of 8GB RAM, 4-6 cores CPU, 1000GB HDD.

Which brand of 1U server is recommended and cost effective?

Thank you very much in advance!

Nicholas

8gb RAM? u wanna run virtual servers at 1gb each issit? :s13:
 

darkarn

Arch-Supremacy Member
Joined
Mar 30, 2005
Messages
10,626
Reaction score
186
8gb RAM? u wanna run virtual servers at 1gb each issit? :s13:

That's was what I am thinking too :s13: That's why really need to say what are the use cases; if say using only two Linux VMs then 8GB should be no issue...
 

ragnarok95

Senior Moderator
Senior Moderator
Joined
Mar 9, 2004
Messages
125,419
Reaction score
6,656
I run it on a HP proliant server, amd opteron 4 cores and 12GB memory.
 

Op_Valkyrie

Arch-Supremacy Member
Joined
Nov 9, 2009
Messages
13,167
Reaction score
1,309
I'm not too familiar with these.. Thats why looking for an off the shelve model that is fully verified by DELL or HP that is compatible. Need VT-d, I remembered a VM I install prompted this when running with VM workstation..

U can use any hypervisor type-2 e.g. QEMU if u don wish to interfere with ring 0 aka kernel level.... Or use the free standalone Microsoft hyper-v server 2012 R2... Since it support more windows based drivers out of the box at a type-1 microkernelized level.
 

davidktw

Arch-Supremacy Member
Joined
Apr 15, 2010
Messages
13,551
Reaction score
1,301
Dear experts,

I need to purchase a server to install ESXi 5.5 (free version).

The specs I require is a minimum of 8GB RAM, 4-6 cores CPU, 1000GB HDD.

Which brand of 1U server is recommended and cost effective?

Thank you very much in advance!

Nicholas

Not sure why you must have an ESXi server. If this is not a hard requirement, perhaps you want to investigate on using AWS for your purpose. Of course, that will depends on your usage, your purpose of your VM and then I can advise you more on how to use AWS to your advantage.
 

darkarn

Arch-Supremacy Member
Joined
Mar 30, 2005
Messages
10,626
Reaction score
186
Hmm... I am making a random guess here; I think TS wants to learn how to deploy ESXi but just needed a "correct" machine to do so, that's why this thread is created.
 

davidktw

Arch-Supremacy Member
Joined
Apr 15, 2010
Messages
13,551
Reaction score
1,301
Hmm... I am making a random guess here; I think TS wants to learn how to deploy ESXi but just needed a "correct" machine to do so, that's why this thread is created.

Could be. TS will be in the better position to advise
 

darkarn

Arch-Supremacy Member
Joined
Mar 30, 2005
Messages
10,626
Reaction score
186
Could be. TS will be in the better position to advise

That's why I asking about his use case(s) earlier. If he is deploying the VMs as part of his job (or school project?), the solutions offered here can be better alternatives in terms of maintenance. But if he just wants to learn ESXi (I in similar situation too lol), then I can see why he wants what he specified in this thread.
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top