S23 accessories discussion

[MIVEC525]

Can UAG s23ultra phone case pylo fit WSD glass ?

sure can...UAG the side clearance the best....

 

[DanJinKoo단진구]

Can UAG s23ultra phone case pylo fit WSD glass ?

I use wsd and uag plasma fit nicely still have abit gap

 

[nightkids7089]

$196??? omg

ya lah...... knn the seller flip too hiong liao......

 

[KeYoKe]

Can UAG s23ultra phone case pylo fit WSD glass ?

Yes. Can always ask the shop when in doubt.

Wsd very case friendly.

Worst case just bring every cases you own along to the shop, ask them do a test fit before applying

 

[KeYoKe]

Haiz. Less than 2 weeks. This is Okonz. Since it's a flat screen, I didn't expect this to happen.. at least not this fast. Really like this SP.. but I dunno if I can accept this..
I didn't drop/knock and I don't use a case either..

Tbh bro... Flat screen u can consider ringke or spigen tempered glass. Dont need go UV glue type ba

 

[KeYoKe]

Casefactorie no have WD sp...who said have? @KeYoKe View attachment 38700

Bro this simi font again ah? Ur font all look nice hor

 

[nightkids7089]

ambience noise, noise cancellation, the only good is when hearing phone, crystal clear...

sumseng boost that their buds got sexcellent noise cancer-lation de wor......

maybe you got extra sensitive ears !!!

 

[nightkids7089]

this one open close one small sand can scratch your lens....many ppl say one...so I not interested...lol

camera cover so dangerous de ah?

i tot will definitely be much safer than without cover de......

 

[nightkids7089]

any ho gai siao on clear case preferably with kickstand or camera cover?

actually plain clear case also can la......

saw on internet there are customized clear case which they claim good quality bla bla......any comments / advise on this ?

 

[trenzterra]

any ho gai siao on clear case preferably with kickstand or camera cover?

actually plain clear case also can la......

saw on internet there are customized clear case which they claim good quality bla bla......any comments / advise on this ?

Plain clear case - ringke fusion or fusion bumper is the best already. The sides are the nicest to hold of all the cases I tried so far.

 

[nightkids7089]

Plain clear case - ringke fusion or fusion bumper is the best already. The sides are the nicest to hold of all the cases I tried so far.

i used Ringke on my Note Edge before...... hard rubber turn yellowish after couple of years iirc.....

some say bumper better.....is it hard plastic ?
will it turn yellowish very fast ?

 

[MIVEC525]

Bro this simi font again ah? Ur font all look

Bro this simi font again ah? Ur font all look nice hor

 

[KeYoKe]

Haiz. Less than 2 weeks. This is Okonz. Since it's a flat screen, I didn't expect this to happen.. at least not this fast. Really like this SP.. but I dunno if I can accept this..
I didn't drop/knock and I don't use a case either..

I tested spigen ez fit on s23+, working flawlessly. Pros of a flat screen phone

 

[MasK]

Tbh bro... Flat screen u can consider ringke or spigen tempered glass. Dont need go UV glue type ba

I tested spigen ez fit on s23+, working flawlessly. Pros of a flat screen phone

Yes bro.. that was my intention also. Then Okonz told me the UV glue makes the FP scanning more accurate and I thought that kinda makes sense...
So.. Okonz offered to replace my SP with non-UV one (waste $$ here). So I'll get that done tomorrow and see how that goes.

The non-UV version is a tad smaller, so might be safer when I insert my phone into my pocket. I'm surprised that his UV one (in my pic) is exactly to the edge. Looks awesome, but not much tolerance for cases. I believe other SPs are all a bit smaller.

If this Okonz non-UV doesn't go well, I'll give one last try. Whitestone EZ non-UV or Spigen EZ fit.
When said working flawlessly in what sense? Looks great/FP scanning?

Hows your UV film coming along? FP scanning good? Feels like glass?

Cheers

 

[KeYoKe]

Yes bro.. that was my intention also. Then Okonz told me the UV glue makes the FP scanning more accurate and I thought that kinda makes sense...
So.. Okonz offered to replace my SP with non-UV one (waste $$ here). So I'll get that done tomorrow and see how that goes.

The non-UV version is a tad smaller, so might be safer when I insert my phone into my pocket. I'm surprised that his UV one (in my pic) is exactly to the edge. Looks awesome, but not much tolerance for cases. I believe other SPs are all a bit smaller.

If this Okonz non-UV doesn't go well, I'll give one last try. Whitestone EZ non-UV or Spigen EZ fit.
When said working flawlessly in what sense? Looks great/FP scanning?

Hows your UV film coming along? FP scanning good? Feels like glass?

Cheers

My uv film is fine definitely. Very smooth. But give me an option, i rather use glass than film. Thats why my phones are all flat screen

So far s23+ spigen ezfit, fp works 100 percent for me. Only 1 enrolment per finger. Touch sensitivity turned off.

I just dont like UV glue on my device. So i avoid curve screen phones usually. The s23+ really gives me a second thought to let go my ultra...

 

[MasK]

My uv film is fine definitely. Very smooth. But give me an option, i rather use glass than film. Thats why my phones are all flat screen

So far s23+ spigen ezfit, fp works 100 percent for me. Only 1 enrolment per finger. Touch sensitivity turned off.

I just dont like UV glue on my device. So i avoid curve screen phones usually. The s23+ really gives me a second thought to let go my ultra...

Thanks for your input.
Yea.. coming back to flat screen after 7yrs is a big plus for me and to me this along was already an upgrade for me from S22U. Just happy that my 2 potential issues weren't issues after all: FHD and 8GB RAM.

 

[KeYoKe]

Thanks for your input.
Yea.. coming back to flat screen after 7yrs is a big plus for me and to me this along was already an upgrade for me from S22U. Just happy that my 2 potential issues weren't issues after all: FHD and 8GB RAM.

8gb ram is more than enough tbh... At most if really need extra ram just go ram plus. But i have no issues for 8gb ram at all

All the ultra are curve screen... Looking forward to a ultra with full flat screen.

If the okonz non UV doesnt work fine, give spigen one a try, i tried it and its good!

 

[Loser]

8gb ram is more than enough tbh... At most if really need extra ram just go ram plus. But i have no issues for 8gb ram at all

All the ultra are curve screen... Looking forward to a ultra with full flat screen.

If the okonz non UV doesnt work fine, give spigen one a try, i tried it and its good!

Spigen SP sucked at least the neoflex I got from their official store on shopee.

Suspect they reuse the one from S22 ultra, the width not enough to cover up the display until the bezels on both sides and the material more rubbery than ringke's tpu SP.

I using ringke one really good material self heals from dinks and scratches but the wings at the side interferes with cases.

Edit: oh y'all talking about flat screen TPSG, check your privileges and stop harming curved screen users.

Flat screen anyhow paste full glue TPSG also can.

 

[KeYoKe]

Spigen SP sucked at least the neoflex I got from their official store on shopee.

Suspect they reuse the one from S22 ultra, the width not enough to cover up the display until the bezels on both sides and the material more rubbery than ringke's tpu SP.

I using ringke one really good material self heals from dinks and scratches but the wings at the side interferes with cases.

I all along avoid neoflex... Dont like the water application, plus the rubbery feel and orange peel effect.... However, spigen tempered glass is good, i don't like front camera cutout... Ibywind has that, but i still use ibywind cos it is cheap like 9 bucks for 2 pieces with good coating...

Now still honeymoon period, give the phone better care, after few months jus use the cheap ibywind lor

 

[Loser]

I all along avoid neoflex... Dont like the water application, plus the rubbery feel and orange peel effect.... However, spigen tempered glass is good, i don't like front camera cutout... Ibywind has that, but i still use ibywind cos it is cheap like 9 bucks for 2 pieces with good coating...

Now still honeymoon period, give the phone better care, after few months jus use the cheap ibywind lor

Didn't know you got S23+ also. What a baller.