SATA to Molex possible?

Napalm

Member
Joined
Sep 16, 2000
Messages
326
Reaction score
115
Hi, I need some advice here.
I just bought a HP desktop.
Decided to buy an additional sound card - Asus Sonar Essence STX.
When I tried to install it, I realised that I need to connect a 4-pin (molex?) power supply to the sound card. But I realised there was no molex connector in my computer at all!

Can someone help me verify that
(1) This is a SATA connector from my PSU (there's another end connected to my CD reader)
kzrr.jpg


(2) This is a molex power supply input socket (located on the sound card)
n4ts.jpg


(3) All I need to do is to purchase an adapter to connect the SATA connector to the molex power supply?

Or do I need to change the entire power supply unit (argh??!!)

Thank you!
 

Napalm

Member
Joined
Sep 16, 2000
Messages
326
Reaction score
115
Thanks! I'll go check it out.
Do you happen to know if the power from SATA would be sufficient for this molex connection on the card?

Yeah it's a brand new computer. But the computer was already opened when the sellers threw in a free RAM upgrade. They assured me that the warranty is still valid for the computer parts that was part of the original setup.
 

Napalm

Member
Joined
Sep 16, 2000
Messages
326
Reaction score
115
Just to be clear, I'd like to know if there are any voltage issues I should look out for?

Or is it a fairly straightforward thing to connect the SATA cable to the adapter, then to the molex socket of the sound card?
 

nyquist_ty

Master Member
Joined
Mar 5, 2006
Messages
4,009
Reaction score
0
Just to be clear, I'd like to know if there are any voltage issues I should look out for?

Or is it a fairly straightforward thing to connect the SATA cable to the adapter, then to the molex socket of the sound card?
The adapter does not look correct, because it converts from molex into sata type connector. What you need is the reverse.

Maybe you can checkout SLS shop on level 6 that sells a lot of the PC cables. Ask for the SATA male to Molex female power cable.
Amazon.com: C2G / Cables to Go 10149 ATA Male to LP4 Female Power Cable -6-Inch, Multi: Electronics

Alternatively, if your existing devices hdd, dvd use the molex type connector, you can get a splitter cable with 2 molex connectors to connect to both the sound card and the device.

No voltage issue because the SATA power cable provides all the voltage types in the molex. However, the reverse is not true when you convert molex to sata. e.g. 3.3V. refer to Serial ATA - Wikipedia, the free encyclopedia
 

Napalm

Member
Joined
Sep 16, 2000
Messages
326
Reaction score
115
Just to close this, I went back to the shop I bought this from (Bizgram) and told them about my problem. They got the cable from next door for me. Good for service. But of course they marked it up before charging me.

Long story short, the converter can be found on the 5th and 6th floor cable shops. It's not available on the 2nd/3rd floor cable shop.
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top