[Solved] Sexpert Builder Come In

[princewenle]

I am building my PC and encounter issue with installing the fans.

I am using Lian Li o-11 Dynamics Evo.
Motherboard = gigabyte b550 Gaming X v2.

No. 1 = 6 tecware fans 120mm

No. 2 = 1 AIO tecware mirage 360
a. CPU fans cable:

b. 3 fans tecware 120 (same as No.1)

No. 3 = Lian Li uni fan SL120 (single)

No. 4 = Lian Li fans hub

No. 5 = tecware Omni Hub

No. 3 connect to lian li fan hub = no issue
No. 1 and 2b connect to tecware hub = no issue

The rest of No. 2a , no.4 and no.5, where should i connect to my MB / PSU?

Here is my mb video for your better review.

 

[86technie]

Take note if you are not familiar with what is ARGB and RGB.
Please bring to a shop let them setup cuz if you connect wrongly
it can damage the motherboard.

Think you bring to a shop setup would be better, at least learn
from the shop how to connect.

 

[Phen8210]

I am building my PC and encounter issue with installing the fans.

I am using Lian Li o-11 Dynamics Evo.
Motherboard = gigabyte b550 Gaming X v2.

No. 1 = 6 tecware fans 120mm

No. 2 = 1 AIO tecware mirage 360
a. CPU fans cable:

b. 3 fans tecware 120 (same as No.1)

No. 3 = Lian Li uni fan SL120 (single)

No. 4 = Lian Li fans hub

No. 5 = tecware Omni Hub

No. 3 connect to lian li fan hub = no issue
No. 1 and 2b connect to tecware hub = no issue

The rest of No. 2a , no.4 and no.5, where should i connect to my MB / PSU?

Here is my mb video for your better review.

AIO tecware mirage 360

Plug to CPU_FAN and D_LED2

 

[Phen8210]

Lian Li Fan Hub
F_USB1 or F_USB2

Tecware Omni Hub
D_LED1 and SYS_FAN3

 

[princewenle]

AIO tecware mirage 360

Plug to CPU_FAN and D_LED2

Thank you bro.

 

[princewenle]

Take note if you are not familiar with what is ARGB and RGB.
Please bring to a shop let them setup cuz if you connect wrongly
it can damage the motherboard.

Think you bring to a shop setup would be better, at least learn
from the shop how to connect.

Yep, so regret now, dont even dare to turn on to try. Thats why post it here to learn from sexperts here. Hope can solve this riddle to me

 

[princewenle]

What if i have another omni hub? Where should i plug it to?

 

[princewenle]

Btw i also have 1 rgb cable came from o-11 dyn evo. Currently use D_LED1 slot. If i let omni hub to use it.

Can i plug this rgb cable from pc case to omni hub?

 

[Phen8210]

Btw i also have 1 rgb cable came from o-11 dyn evo. Currently use D_LED1 slot. If i let omni hub to use it.

Can i plug this rgb cable from pc case to omni hub?

Yeah both ARGB so can

Anyway, why do you need both hubs?

The omni already have 8x ARGB, and 8x PWM fan header.

 

[princewenle]

Lian Li Fan Hub
F_USB1 or F_USB2

Tecware Omni Hub
D_LED1 and SYS_FAN3

For tecware omni hub, i have 1 more sata cable, do i need to connect it?

 

[Phen8210]

For tecware omni hub, i have 1 more sata cable, do i need to connect it?

Yeah, that one is for power. Connect the SATA power from your PSU.

 

[princewenle]

Yeah both ARGB so can

Anyway, why do you need both hubs?

The omni already have 8x ARGB, and 8x PWM fan header.

Yep 8 only. I have 9 tecware fans here. How to solve it with 1 hub?

Kindly advise and recommend something to resolve this issue.

 

[Phen8210]

Yep 8 only. I have 9 tecware fans here. How to solve it with 1 hub?

Kindly advise and recommend something to resolve this issue.

Do all use ARGB?

 

[princewenle]

Do all use ARGB?

Yep. All ARGB, Tecware Omni P12

Is it bad combination?

 

[Phen8210]

Yep. All ARGB, Tecware Omni P12

Is it bad combination?

There are many ways to do this with an ARGB splitter.

Usually, people put the splitter on the ARGB header at the mobo, then connect 2 ARGB hubs to it. The hubs are independently powered by PSU, and signal lines take very little power.

 

[princewenle]

Thanks for the advice bro. Let me get the splitter first

 

[princewenle]

Ok. I gave up.

I went and get the lian li 3 fans to replace tecware.

3 lian li fans sl120 = 1 rgb cable
1 lian li fan sl120 = 1 rgb cable
Both connect to uni fans controller hub

3 tecware omni p12 & aio tecware connect to omni hub.

Another problem come now, where should i put the hub here? I got 1 psu havent installed yet

 

[princewenle]

Lian Li Fan Hub
F_USB1 or F_USB2

Tecware Omni Hub
D_LED1 and SYS_FAN3

Hi bro, after numerous trying, at last i managed to get all the fans functioning and led light is on.

The problem is with my lian li fans.
I use lian li fans controller to connect my lian li fans.
My uni fans controller connect to F_usb1 or 2 and sata power cable to psu.

The led light is on, but the fans is not spinning at all.
Then i unplug the usb and put in the argb and fans cable, it works.

May i know if there is any solution, because i prefer connect to F_usb1

 

[Phen8210]

Hi bro, after numerous trying, at last i managed to get all the fans functioning and led light is on.

The problem is with my lian li fans.
I use lian li fans controller to connect my lian li fans.
My uni fans controller connect to F_usb1 or 2 and sata power cable to psu.

The led light is on, but the fans is not spinning at all.
Then i unplug the usb and put in the argb and fans cable, it works.

May i know if there is any solution, because i prefer connect to F_usb1

Need to connect all 3

The purpose for the USB is so you can use lian li software

 

[princewenle]

Need to connect all 3

The purpose for the USB is so you can use lian li software

I am so confused now.
Tried 3 setup here:
1. Connected 2 cables without USB = fans are working, but RGB light is off
2. Connected 3 cables (all) = fans not working, but RBG light is on
3. Connected USB only = Fans and RGB light is off