Start Up Error!

[brendantys]

Hi,

when i woke up this morning and tried switching on my computer, I would get a message which says "CPU Fan error, press F1 to run setup". I was using my computer the yesterday and it was perfectly fine. Anybody know how to fix this? Help would be appreciated, thanks!

A photo is attached for reference:

 

[poor_poor]

Hi,

when i woke up this morning and tried switching on my computer, I would get a message which says "CPU Fan error, press F1 to run setup". I was using my computer the yesterday and it was perfectly fine. Anybody know how to fix this? Help would be appreciated, thanks!

A photo is attached for reference:

Is your CPU fan spinning?

Enter bios >> Advanced Mode > disable monitor CPU fan

 

[brendantys]

my cpu fan is spinning. I think my motherboard is not reading the fans, because when i go into bios main page the part where they show fans rpm as is shown as N/A. My corsair link 2 is also not detecting the H100i Pump and both fans

 

[poor_poor]

my cpu fan is spinning. I think my motherboard is not reading the fans, because when i go into bios main page the part where they show fans rpm as is shown as N/A. My corsair link 2 is also not detecting the H100i Pump and both fans

try update your bios

P8Z77-V PRO BIOS 1908 - 2013.04.12

http://dlcdnet.asus.com/pub/ASUS/mb/LGA1155/P8Z77-V_PRO/P8Z77-V-PRO-ASUS-1908.zip

 

[brendantys]

try update your bios

P8Z77-V PRO BIOS 1908 - 2013.04.12

http://dlcdnet.asus.com/pub/ASUS/mb/LGA1155/P8Z77-V_PRO/P8Z77-V-PRO-ASUS-1908.zip

What program do i use to open the file once i unzip it? It's type is a "CAP file"

 

[poor_poor]

What program do i use to open the file once i unzip it? It's type is a "CAP file"

copy CAP file into thumb drive Fat 32 format

than enter bios > EZ flash and select the bios file update

 

[ChandlerBing]

What program do i use to open the file once i unzip it? It's type is a "CAP file"

Put the file either in a thumb drive (make sure it's in the root directory too) or the root directory of your main drive.

Go into BIOS and go to your update or flash BIOS option. Select the cap file when prompted.