TG case with great Custom Loop support

[markpyrozen]

Looking for an Atx case that has a tempered glass side panel
Less than $300
Supports at least 1 240mm rad any good recommendations?
Thanks in advance

 

[muddle]

Mastercase h500p

 

[royfrosty]

Most importantly what do you intend to cool?

What are the kind of CPU/GPU are you intending to cool? Cause a single 240mm rad may not be able to cool much.

 

[markpyrozen]

Most importantly what do you intend to cool?

What are the kind of CPU/GPU are you intending to cool? Cause a single 240mm rad may not be able to cool much.

Looking to cool a 1080ti and 8700k silent operation is the main priority adding a 120mm rad at the back would be ok right?

 

[royfrosty]

Looking to cool a 1080ti and 8700k silent operation is the main priority adding a 120mm rad at the back would be ok right?

Definitely not enough to cool with a single 240mm. The general thumb rule is a 240mm for cpu or 1 gpu only then add another 120mm per component added.

So minimum you would require is at least a 360mm rad. Can be 240mm + 120mm or tripple 120mm or a single 360mm rad.

But my advice to you would be, add as much rad as possible if you can. Hence you can get away with much lower rpms fans.

There are a few good cases around.

- Thermaltake Core P5 (open bench style, may accumulate dust)
- Lian Li PC-O11 (clean looks with dual chamber style, mainly aluminium)
- Cooler Master Mastercase H500p (mainly steel)
- Inwin 805 (nice construction with plenty of rad support)
- Inwin 305 (Cheap but mainly made out of steel)
- Corsair 750D airflow (Very old dated case with no TG, but still the best practical case for water cooling)
- Corsair 900D (Big spacious and great rad support, very big, and mainly steel construction but it will be better if you have lots of components to cool)
- Fractal Design S (Cheap mainstream case, mainly steel with standard rad support)

 

[tangpx]

Try inwin 509 casing. I am currenty using it for wc and still under construction.
The case able to hold 2x 240 rad or 2x 360 rad and a 120 rad. Total 3 rad in a casing.

This is my casing

 

[Bluegrass_Corbell]

some Phanteks model for consideration
mostly design with water cooling in mind

http://www.phanteks.com/Enthoo-Evolv-ATX-TemperedGlass.html

http://www.phanteks.com/Enthoo-Luxe-TemperedGlass.html

http://www.phanteks.com/Enthoo-Pro-M-TemperedGlass.html

http://www.phanteks.com/Eclipse-P400-TemperedGlass.html

 

[markpyrozen]

Try inwin 509 casing. I am currenty using it for wc and still under construction.
The case able to hold 2x 240 rad or 2x 360 rad and a 120 rad. Total 3 rad in a casing.

This is my casing

What Reservoir is that thats the size I want to get for my project!

 

[tangpx]

It ekwb brand. Ek-res x4 250. It is the biggest size.
Ceck your casing size before buying or it will not go in.

What Reservoir is that thats the size I want to get for my project!

 

[gld998]

Mastercase h500p

lazada no sale, if not i hooted already.

 

[gld998]

some Phanteks model for consideration
mostly design with water cooling in mind

http://www.phanteks.com/Enthoo-Evolv-ATX-TemperedGlass.html

http://www.phanteks.com/Enthoo-Luxe-TemperedGlass.html

http://www.phanteks.com/Enthoo-Pro-M-TemperedGlass.html

http://www.phanteks.com/Eclipse-P400-TemperedGlass.html

Using the p400 now.. looks awesome with rgb