The Leather Thread

reddevil76

Member
Joined
Jan 2, 2011
Messages
121
Reaction score
0
After these years of learning and looking at people's work. I noticed only asian practise such stitching method. The Japanese, Taiwanese, Hong Konger, Indonesian and us:), hand stitch our craft this way.
I am assuming it is due to different type of culture that was passed down previously.
Even the tools we used are different, as such, I believe the end result is diffrent.

Actually I learnt this from Jim Custeau who is from US. So I think the westerners do practice it also, but each will vary depending their learning source.

Anyway, most important is that we choose the method for rational reasons rather than simply "it is the way it is done".
 

Boltstorm

Supremacy Member
Joined
Dec 31, 2002
Messages
7,809
Reaction score
44
Hi reddevil76...do u mind sharing your resources on where u learnt leatherwork and where we can get tools and materials?
 

lazybonez

Master Member
Joined
Jun 1, 2010
Messages
4,963
Reaction score
0
to reddevil76, saw ur work on flickr. its very well done. if only i nv bought the tanner goods earlier on, i might have order the wallet from you if you are selling it :)
 

reddevil76

Member
Joined
Jan 2, 2011
Messages
121
Reaction score
0
Hi reddevil76...do u mind sharing your resources on where u learnt leatherwork and where we can get tools and materials?

Actually my friend does it for a living. So one day, I needed a toolbag for my bike, and he was too busy to do it. So he taught me to do myself. But the thing is, he is working while teaching me, so sometimes he will take the thing over, go "like this, like this lah.." and hand it back to me.

Then when I went back home and wanted to do things myself, I realised I couldn't do it. For e.g. braiding. He would start a braid and then show me how to braid. Then when I finish, and I ask him how to end it, he will take over and do it for me cos he was busy.

The problem then is, I knew how to braid, but I simply didn't know how to start it, or end it. I also didn't even know how to end my stitch. And things like wallets, how long? how wide? How much spine to account for bending? I didn't know, because I only made a tool bag. All these I had to learn simply by trying out. I paiseh to keep bothering my friend especially when his time is his livelihood.

I mainly look to the internet for articles and resources. I would say 95% of the techniques I learnt are from the web, and trying them out. As the materials my friend could supply me is limited, I also sourced my hardware from the web. Sometimes I get the wrong stuff, but i learnt. There are tons of them out there, but the bookmarks are all saved in my old fujitsu, so i don't have them anymore. i believe if you google hard enough, you will find it.

And as i go along, I also unlearnt some things I picked up earlier while making my first tool bag and re-learn new things to suit my decided direction. For e.g. stitching method.

There is no replacement for simply trying to make something yourself. For e.g. instead of asking someone else how big to make a wallet, measure dollars bills and cards yourself, and decide how big you wanna make it. Allowances for stitching edge, etc, actually is derive from common sense. There is no right or wrong. Who knows, you might just set a new standard instead of following current trends.

Also, I found that only after you have tried and failed, then you ask, you will understand the advise better because you can better visualise what the other party is describing.

However if you prefer a more structured learning approach, maybe you can approach OGL to see if they are conducting any workshops in the near future. There are also leathercrafting books for sale online which covers the basic skills.

But if there is a workshop, I think its the way to go, because you can then not only learn something, you can also "test" your level of interest rather than plonking down a huge investment then realise you no longer interested. Whatever basic tools you get from the workshop, you can add on to it as you progress. Even if you no longer pursue it as a hobby, occasionally still can make gifts for friends and family.
 
Last edited:

reddevil76

Member
Joined
Jan 2, 2011
Messages
121
Reaction score
0
Hi reddevil76...do u mind sharing your resources on where u learnt leatherwork and where we can get tools and materials?

Ah, just remembered. Go to tandyleatherfactory.com and watch the free videos there. Should get you started on small projects.
 

mikeeeey

Arch-Supremacy Member
Joined
Jul 25, 2002
Messages
16,048
Reaction score
859
ohh tandy leather... bought a skiver from them few months back cos of a project. lol. no wonder the name sounds familiar
 

archbishopchia

Senior Member
Joined
May 27, 2006
Messages
1,697
Reaction score
0
Kazuki you wanna buy leather laces for your clarks too ah? Wanna share?

Anyway, whats beveled and burnished?

I tried googling but the results were't really that clear
 

kingkongpingpong

Master Member
Joined
Dec 27, 2006
Messages
3,564
Reaction score
0
very good and informative bits of information you guys have provided for leathercrafting. like every artisan in every skill and trade, be it leather or denim-making, a lot of the times every bit of skill honed comes from an experience. one of the best denim makers, from double volante, started out young as a child and learnt from being at the assembly line. he was given one of the most mundane jobs and was only able to proceed further after a certain period of time so that he could come close to being perfect at that job. he could only move on after gaining such experience, thats why he produces such high quality jeans. i believe in leathercrafting it is the same. everything starts from the most basic of tasks. i dont know much about leathercrafting but i believe that like everything, it is through a mistake you will learn new skill sets and how to work around these obstacles and avoid them in future. you can be a leather artisan, jeansmaker, potter, artist or whatever, i maintain that there is no hard and fast rule to getting things right or wrong. experience will be the best teacher you can ever have.

just want to come out to say that i have a great level of respect to the guys from OGL and reddevil76 here. in our fast-moving society, it is nice to know there are people like you guys out there who respect the trade and respect the heritage of such a craft instead of trying to make a quick turnover. keep doing what you guys love. will hope to see more of your works soon and maybe one day i can finally learn to appreciate your craft. cheers.
 

scasi

Senior Member
Joined
Jun 26, 2003
Messages
1,272
Reaction score
159
here it goes, brass setup with Burg Long Black Wallet.
Burg%2BLong%2BBlack%2BWallet%2Bwith%2BBrass%2BAccessories%2B1.JPG

Burg%2BLong%2BBlack%2BWallet%2Bwith%2BBrass%2BAccessories%2B2.JPG
 

kazuki666

Arch-Supremacy Member
Joined
Jul 16, 2004
Messages
14,827
Reaction score
221
Kazuki you wanna buy leather laces for your clarks too ah? Wanna share?

Anyway, whats beveled and burnished?

I tried googling but the results were't really that clear

ya, i am keen to get the leather laces to try on my Clarks DB, if gd then i will get sets for my RW too.

But i am kinda curious do they actually tie those leather laces as per norm for the DB...
 

mikeeeey

Arch-Supremacy Member
Joined
Jul 25, 2002
Messages
16,048
Reaction score
859
ya, i am keen to get the leather laces to try on my Clarks DB, if gd then i will get sets for my RW too.

But i am kinda curious do they actually tie those leather laces as per norm for the DB...
Some info on using leather laces with DB. The thickness of the leather lace looks ok but as it is harder, there will be problem in lacing them up thru the eyelets.
 

kazuki666

Arch-Supremacy Member
Joined
Jul 16, 2004
Messages
14,827
Reaction score
221
here it goes, brass setup with Burg Long Black Wallet.
Burg%2BLong%2BBlack%2BWallet%2Bwith%2BBrass%2BAccessories%2B1.JPG

Burg%2BLong%2BBlack%2BWallet%2Bwith%2BBrass%2BAccessories%2B2.JPG

I always drool when i come back this thread :s7:
I LIKE THAT BRASS REIN!!!!

Btw, the leather for this wallet is different from the one u crafted for me?
This wallet has a more antique feel :D

Some info on using leather laces with DB. The thickness of the leather lace looks ok but as it is harder, there will be problem in lacing them up thru the eyelets.

u got it for your DB? can share some pics of them? ;)
 

scasi

Senior Member
Joined
Jun 26, 2003
Messages
1,272
Reaction score
159
same leather, but i select the more grainy part of the leather. This can hold 8 cards, 3 bill slot and 1 coin slot
 

archbishopchia

Senior Member
Joined
May 27, 2006
Messages
1,697
Reaction score
0
nice mikeey. Will post up pictures of my DBs too over the weekend.

The best part i like is the tongue of the shoe where it moulds to the shape of the top of our feets.
 

kazuki666

Arch-Supremacy Member
Joined
Jul 16, 2004
Messages
14,827
Reaction score
221
thanks. :)

about 1month plus only...

actually the reason why i asking the period coz u really did a gd deal to darken the sole lor:D


do u know if they have the laces in round de instead of flat?
The default lace really too think liaoz, i doubt can tahan long lor keke
 
Important Forum Advisory Note
This forum is moderated by volunteer moderators who will react only to members' feedback on posts. Moderators are not employees or representatives of HWZ Forums. Forum members and moderators are responsible for their own posts. Please refer to our Community Guidelines and Standards and Terms and Conditions for more information.
Top