The Leather Thread

[khmak_khmak]

I bought quite a fair bit of crazy horse leather recently.

If any hobbyists are interested, I can sell single square feet sheets, for those who just want to try out leathercrafting.

Letting go at $15 psf.

I also do leather commissions for small leather goods.

Feel free to drop me a pm for any enquiries.

 

[donchuan]

how do I go about.....hmmm......, anyone who have at least 1 week over 20 hours to spare during weekday from 12 to 7pm, wish to learn something, make a little spare cash, and think he/she has what it takes regarding this thread, send me a pm on your recent work, real name, age, occupation and something about yourself. Conditions is whatever you learn online, YouTube, books or from local workshop, all have to be forgotten and start afresh.

Hi I still new to leather craft so I think is easily for u to train me to follow your style of doing.
I think is better to c from my instagram to know more about me n my work .
Thanks!
DONOVANCHUAN

 

[Bearhanded]

HI GUYS MY NEQ LEATHER PROJECT, THIS IS BY FAR THE MOST DIFFICULT ONE I'VE DID SO FAR HAHA. COMMENTS PLS

Sent from Samsung SM-G900F using GAGT

 

[Toby88]

HI GUYS MY NEQ LEATHER PROJECT, THIS IS BY FAR THE MOST DIFFICULT ONE I'VE DID SO FAR HAHA. COMMENTS PLS

Sent from Samsung SM-G900F using GAGT

-Stitching could be improved. They are a little too close to the edge.
-Stress points (sides of openings) should be double stitched for durability.
-Logo seems to be lightly embossed, a deeper or darker impact should be nicer.
-Logo looks a little off-centre. It looks more towards the right, which almost touching the stitch.

With more practice, these should be easily corrected.

 

[dilphinus]

-Stitching could be improved.

my same sentiments. stitching seems loose and also not consistent. also, burnishing not done?

 

[Toby88]

my same sentiments. stitching seems loose and also not consistent. also, burnishing not done?

I think he did. But I guess it's because the cuts are not smooth and/or burnishing agent not applied enough.

 

[Bearhanded]

Thanks guys! I tightened each stitch alr but it's not enough? Can you guys give me some advice on burnishing? Is it the glue I use? Cos when I burnish the contact glue that's expose seems to affect the burnishing.

Sent from Samsung SM-G900F using GAGT

 

[dilphinus]

Thanks guys! I tightened each stitch alr but it's not enough? Can you guys give me some advice on burnishing? Is it the glue I use? Cos when I burnish the contact glue that's expose seems to affect the burnishing.

Sent from Samsung SM-G900F using GAGT

Did you bevel the edges? Also I think you missed out one step. I can't find youtube videos or images. Kinda busy now.

You use this tool to 'level' the edges. It will remove the glue.

 

[Toby88]

Thanks guys! I tightened each stitch alr but it's not enough? Can you guys give me some advice on burnishing? Is it the glue I use? Cos when I burnish the contact glue that's expose seems to affect the burnishing.

Sent from Samsung SM-G900F using GAGT

-Tension of stitch is very important, and it should be even on both sides of stitches. This needs practise.
-It can also be due to technique.
-It also be be attributed to types of leather used (i.e. softer leathers generally need less tension, and harder/more layers generally need slightly more).
-It also be due to stitching holes not even or aligned, so even if your stitch is ok, it is not even already.

-You should not burnish the glue. It's the edges of the leather flesh that you burnishing.
-Burnishing agent plays a role. Get good ones.
-Like said, you should bevel the edges too with that tool.
-Good smooth cuts are important as well (i.e. leather is fully cut in a 1-2 strokes ideally).

 

[oohmygod]

anyone can recommend shop or freelance that can help to custom make leather pouch?

 

[Dan_Bo]

anyone knows/selling soft leather messenger/tote bags for men?

 

[Bearhanded]

-Tension of stitch is very important, and it should be even on both sides of stitches. This needs practise.
-It can also be due to technique.
-It also be be attributed to types of leather used (i.e. softer leathers generally need less tension, and harder/more layers generally need slightly more).
-It also be due to stitching holes not even or aligned, so even if your stitch is ok, it is not even already.

-You should not burnish the glue. It's the edges of the leather flesh that you burnishing.
-Burnishing agent plays a role. Get good ones.
-Like said, you should bevel the edges too with that tool.
-Good smooth cuts are important as well (i.e. leather is fully cut in a 1-2 strokes ideally).

Thanks Toby I'll work on it. BTW of you know the name of the glue can tell me?

Sent from Samsung SM-G900F using GAGT

 

[Toby88]

Thanks Toby I'll work on it. BTW of you know the name of the glue can tell me?

Sent from Samsung SM-G900F using GAGT

What glue?

 

[kingsfall]

Hi guys I'm thinking of making a laptop sleeve. May I know what kind of leather should I use and is there different grading to the raw leather?

 

[Toby88]

Hi guys I'm thinking of making a laptop sleeve. May I know what kind of leather should I use and is there different grading to the raw leather?

It wholly depends on what you want your sleeve to feel and look like. Most of the time though for sleeves, soft and pliable is desired.

However, if it's your 1st time making it, maybe you can go for veg tan leathers, they are generally an all-rounder for most types of projects. Good to work with, gives a good patina when aged, generally favourable in our weather, last quite long. Plus easily available and affordable.

Yes there are different grades of leather. There is a plethora of information about this (from Google).

Feel free to 'play' around with leathers, you will definitely learn more when you do so.

 

[kingsfall]

It wholly depends on what you want your sleeve to feel and look like. Most of the time though for sleeves, soft and pliable is desired.

However, if it's your 1st time making it, maybe you can go for veg tan leathers, they are generally an all-rounder for most types of projects. Good to work with, gives a good patina when aged, generally favourable in our weather, last quite long. Plus easily available and affordable.

Yes there are different grades of leather. There is a plethora of information about this (from Google).

Feel free to 'play' around with leathers, you will definitely learn more when you do so.

May I ask if there's any way to find out the 'market price' for commonly use leather?

 

[Toby88]

May I ask if there's any way to find out the 'market price' for commonly use leather?

Pricing is quite varied due to many various reasons. It can be a range from a couple of dollars per square feet (for calf, goat, etc.) to exotic skins (snake, alligator, etc.) price is about couple of hundreds.

A good way is to ask around for price, then find the average between most sellers. Then, form your own decision as to which sellers gives you the 'better dollar per value'. Just like any other product

 

[Bearhanded]

What glue?

A hahaha not glue I mean tool!

Sent from Samsung SM-G900F using GAGT

 

[Toby88]

A hahaha not glue I mean tool!

Sent from Samsung SM-G900F using GAGT

Refer to dilphinus post for that tool. His reply to you (near the top of this page).

 

[kingsfall]

Pricing is quite varied due to many various reasons. It can be a range from a couple of dollars per square feet (for calf, goat, etc.) to exotic skins (snake, alligator, etc.) price is about couple of hundreds.

A good way is to ask around for price, then find the average between most sellers. Then, form your own decision as to which sellers gives you the 'better dollar per value'. Just like any other product

Do u have any leather distributor to recommend for common veg tan leather?