The Watch Thread - Part 14

[gaoxing84]

It's a manual watch.i can't find it any more ( no stopping point ) st5 movement

undefined HardwareZone Forums app

seagull st-5?

 

[pwillie]

Monday pang kang

 

[reikizi]

好像是。。。
http://www.bodying.sg/shipping_rate.php

no lah, despatch in Singapore as below (from the link u provided)


Duties and Taxes
For all delivery addresses outside of Singapore, you are responsible and liable for all custom duties, import tax, broker fees or other possible additional custom handling charges. These are excluded from the total cost of your purchase amount. Kindly check with your local custom department for these possible charges. Thank you.

 

[slow_mo]

Seiko train

Seiko train

 

[YouHeypiCanLiao]

seagull st-5?

Yeah

http://forums.watchuseek.com/f502/e...w-1963-chronograph-project-watch-1069351.html

who can repair ah. the watch is like US150 only but can't find no more

 

[rachdanon]

what you wearing with?
Nomos for me, suits my casual dress watch style and my small wrist.
But might be abit casual for full suit/shirt/tie, and the size maybe small for some with bigger wrist.

The black dress watch will be for office wear - long sleeve & pants.

 

[cyberet]

It's a manual watch.i can't wound it any more ( no stopping point ) st5 movement

undefined HardwareZone Forums app

keep winding but never hit the stopping point?

sounds like main spring broke, or the gear slipped out of position

probably taobao can find the part.

that wus link is a chrono wor, hahaha, no wonder la. the servicing cost exceed the watch price. you ask him to diagnose the problem, then you go find the part for him la, see he want to or not. or you say I buy a new watch from you, you help me service this one also

is this still active?
http://www.seagullsingapore.com/article.php?id=8

 

[cyberet]

launching tomorrow?

https://www.richardlegrand.com/

 

[cichlid]

 

[sinkiedk]

What is this model?

 

[YouHeypiCanLiao]

Means better to perhaps send back to hkg or china?
Local no hope or too ex to repair?

keep winding but never hit the stopping point?

sounds like main spring broke, or the gear slipped out of position

probably taobao can find the part.

that wus link is a chrono wor, hahaha, no wonder la. the servicing cost exceed the watch price. you ask him to diagnose the problem, then you go find the part for him la, see he want to or not. or you say I buy a new watch from you, you help me service this one also

is this still active?
http://www.seagullsingapore.com/article.php?id=8

undefined HardwareZone Forums app

 

[hgtech]

What is this model?

SBDC053 for JDM
SBP053 for International/Worldwide

 

[patryn33]

Means better to perhaps send back to hkg or china?
Local no hope or too ex to repair?

undefined HardwareZone Forums app

Repair cheaper or replace the movement cheaper?
Send back to China or HK that’s not cheap too.
Maybe at cost of watch

 

[gaoxing84]

Means better to perhaps send back to hkg or china?
Local no hope or too ex to repair?

undefined HardwareZone Forums app

definitely expensive. haha cost more than the watch.

especially when locally no one wants to touch it and those who does sure charge high.

chrono movement most chor when need to service or what

typically omega charges at least 1.2k just to do a normal service for their moon watch.

 

[Ed.YEO]

seagull st-5?

Yeah

http://forums.watchuseek.com/f502/e...w-1963-chronograph-project-watch-1069351.html

who can repair ah. the watch is like US150 only but can't find no more

海鷗 ST5是ST5，ST19歸ST19，完全是兩碼不同機芯，功能差別大不同。

ST5 东风表
1965年天津手表厂为发挥技术人员才干。杨可能厂长提出“由仿制改自制，我们要研发独立设计的机芯”，首先成立了一个领导干部、技术人员、老工人三结合的试制小组。（文革时期的组织形式）1966年1月，天津手表厂成立了设计组，成员有王亚舟（后任天津手表厂厂长）、杨桂兰等。设计组首先对瑞士、日本、德国、法国、苏联等国生产的140多只手表的结构、技术参数进行分析、测定、计算，列出其优缺点。在此基础上，确定几个结构方案，向有经验的修表师傅和兄弟厂征求意见，开始设计与试制工作。同年8月15日试制成功机芯直径为27MM厚度3.8MM延续走时44小时的ST5基础机芯，第一批试制品节拍18000次/时，之后改为21600次/时。走时精度≤30S/D。ST5型机芯零件除游丝、防震器使用进口零件外，其余如发条、宝石轴承元件和零部件全部自行生产。批量生产的手表经历了恶劣环境下的考核检验，证明ST5型手表工作可靠性能良好。1969年正式投入生产。

由于当时正当文革时期所以采用ST5机芯的新表取名“东风牌”，意在东风压倒西风。东风表投入市场后，很受各界关注，结构先进，工艺性好，走时准确，使用可靠，薄型大盘面，外观造型优美，倍受广大用户信赖。在没有国产女表的情况下，曾用东风机芯改装了相当数量的中型表做为女表投入市场，深受女同志靘睐。中型表投产不久，国务院徐向前副总理陪同柬埔寨西哈努克亲王访问手表厂时，赠送给莫尼克一只。莫尼克夫人爱不释手，连连称赞，造型美观，端庄好看。

http://tieba.baidu.com/p/3350743523
https://kaminskyblog.com/2017/09/12/seagull-st19-chronograph-movement-review-brief-history/

“你高興就好”師兄的鏈接，顯示的是ST19計時錶機芯。由於您沒有提供照片的情況下，沒人完全能夠估算你買到的是否是真正海鷗製品，還是建立在海鷗工程設計的杭州次貨。
目前本地衹有兩家公司產品采用海鷗ST19機芯，一是 海鷗錶，二是 索維鐵達時。如果你的是海鷗正品，也許可向 海鷗錶 查詢。不然，就往 時間廊 詢問有沒有得修理他們代理以外的手錶品牌。

 

[Ed.YEO]

definitely expensive. haha cost more than the watch.

especially when locally no one wants to touch it and those who does sure charge high.

chrono movement most chor when need to service or what...

也不是説。。。完全沒得救。。。直接換心，加。。。。。。錢就可。

https://www.ebay.com/itm/Seagull-ma...599258?hash=item590288a65a:g:LhEAAOSweIlZYpnq

問題是在於修錶師傅如何計算收費？一般保養，以瑞士普通7750機芯來説，介於150至250了。雖然是大陸機芯，但是開錶的“手工費用”價格也逃不過80。給他買個新芯，100美元(大概140新元)，加個80。。。自然就超出200了。。。

 

[arc13]

Good morning

 

[hgtech]

Good Morning

 

[YouHeypiCanLiao]

海鷗 ST5是ST5，ST19歸ST19，完全是兩碼不同機芯，功能差別大不同。


“你高興就好”師兄的鏈接，顯示的是ST19計時錶機芯。由於您沒有提供照片的情況下，沒人完全能夠估算你買到的是否是真正海鷗製品，還是建立在海鷗工程設計的杭州次貨。
目前本地衹有兩家公司產品采用海鷗ST19機芯，一是 海鷗錶，二是 索維鐵達時。如果你的是海鷗正品，也許可向 海鷗錶 查詢。不然，就往 時間廊 詢問有沒有得修理他們代理以外的手錶品牌。

Sorry it is Sea-Gull ST1901 hand winding movement not ST5

 

[Kyushinro]

Received the Omega catalogue yesterday, took it out for photo shot.