
Hi guys, I intend to upgrade my RAM from 8GB to 16GB. Currently using a Kingston 2x4GB DDR3 12800. Is it better to buy another 2x4GB, 1x8GB or replace with 2x8GB? Appreciate the help thanks!![]()
Upgrading the ram as need some more items to make use of the Lazada $100 off code. And some games requires a little more than 8GB, so might as well upgrade my ram. Only worry is whether buying another 2x4GB kit will result in system unstable, since my old rams are not the exact same ones that is available on the market.
Hi guys, I intend to upgrade my RAM from 8GB to 16GB. Currently using a Kingston 2x4GB DDR3 12800. Is it better to buy another 2x4GB, 1x8GB or replace with 2x8GB? Appreciate the help thanks!![]()
what games you play need more than 8gb ram?

Hi guys, so i have bought another 2x4GB ram, and installed it in my pc. Everything works well and smooth for 2 days, but now for some reason, my pc will have system error and restart after logging in.
May i know if this is due to the ram causing system instability? I tried putting only 2x4gb ram, and everything works fine, no matter is the old rams or just the new rams, so the new rams definitely have no problem.
http://thewindowsclub.thewindowsclu...9/Blue-Screen-of-Death-Windows-10-600x344.png
The error looks like this, and everytime it restart, the cause of the error given is different.
Also suspect it may be due to the upgrade to Windows 10 anniversary edition. Any advice? Thanks!
so now u are using 4x4gb?what is the frequency? are you using xmp profile?.
although mine is i7 3970x and asus extreme rampage iv and 32gb ram(which i just bought from amazon at 97usd for 32gb)the system is pretty old.i am also facing the problem same as you and what i did was just lower my frequency from 1600mhz to 1333mhz, and up till now i haven face any blue screen.too lazy to tweak the other setting. you may try this.
Yeah, if i use 4x4gb there will be blue screen. I have read up, and most people facing the issue was because the auto settings cause the ram to run higher frequency than normal, so the fix was to manual set it to a lower frequency.
http://www.kingston.com/datasheets/KVR16N11S8_4.pdf
http://www.kingston.com/dataSheets/KVR16LN11_4.pdf
These 2 are the rams i'm using, pretty similar, so should I manually set it to 1333mhz instead of leaving it at auto?