What is the difference between wireless@SG and wireless@SGX and how do i sign onto wireless@SGx?

[firsttimebuyer]

What is the difference between wireless@SG and wireless@SGX and how do i sign onto wireless@SGx?

I am currently using a Samsung galaxy J1 Ace/Amdroid and a friend of mine helped me to set up my wifi such that my android phone would automatically log-onto Wireless@SGx.

However, my android phone have not been able to do so even though the signal is strong.

 

[ZrE0_Cha0s]

well both are abt the same, one required u to login using web browser(Wireless@SG) another required u to pre-registered the login in your mobile (Wireless@SGx)

u can take a look at google, even the 1st post already can tell u wats the differences...
:http://bfy.tw/790V

as for connections wise, im not sure, even for me also have to re-setup the whole thing.

 

[xonix]

1. Have your registered for wireless sg account ?

2. Are you using SIM based or user id/password to automate the login for wireless sgx ?

 

[jury_pack]

Using wireless@sg is better than wireless@sgx. Some place wireless@sgx the password is not even synced properly.

 

[tjrsasea]

What is the difference between wireless@SG and wireless@SGX and how do i sign onto wireless@SGx?

I am currently using a Samsung galaxy J1 Ace/Amdroid and a friend of mine helped me to set up my wifi such that my android phone would automatically log-onto Wireless@SGx.

However, my android phone have not been able to do so even though the signal is strong.

For wireless@SG, you have to login using the web browser everytime you connect. But if you setup your phone such that the username and password is already saved onto your phone's wireless@SGx wifi connection profile, your phone can automatically connect to wireless@SGx everytime it is availablr without you having to login again. Somewhat similar to connecting to your house's wifi.

 

[magix]

Yes Both are sames. SGx don't need to type userid and password.

Wireless@SGx" SSID network without the need for you re-login again.

You can download the guide to manually c onfigure your device

https://www.ida.gov.sg/Learning/Technology-You/Wireless-SG/Support-and-Feedback


Supported Operating Systems

iOS 5.x and abovehttps://www.ida.gov.sg/~/media/Files/Infocomm%20Landscape/Infrastructure/Wireless/iOS%20EAP%20SIM.mobileconfig


Android 4.x and above
https://www.ida.gov.sg/~/media/File...SIM Configuration Guide for Android_Rev01.pdf


BlackBerry OS 10 and above
Windows Phone 8.1 and above

 

[Henry Ng]

Using wireless@sg is better than wireless@sgx. Some place wireless@sgx the password is not even synced properly.

When the password is not synced properly it prompt that your password is wrong? I am having the same problem so stopped using sgx.

 

[magix]

When the password is not synced properly it prompt that your password is wrong? I am having the same problem so stopped using sgx.

Now using SIM Card as password liao mah SGx?

IF you using Sim CARD never prompt for password.

 

[xonix]

You can use Wireless Sgx with sim card or without(id+ password).

But do take note, some wireless Sgx hotspots do not support logins without SIM and it takes a few seconds longer to authenticate.

 

[ZrE0_Cha0s]

You can use Wireless Sgx with sim card or without(id+ password).

But do take note, some wireless Sgx hotspots do not support logins without SIM and it takes a few seconds longer to authenticate.

well tbh some time its works with sim card and id+pw for me. but almost all the times i need to re-setup the login though...

 

[quinnkei]

Wireless@SGx is using SIM EAP protocol. Login is granted based on your SIM card identity. Anyone with a valid Singapore Telco postpaid SIM card can logon to it, not too sure about prepaid. So if you have a active SIM, you can connect to it automatically after 1st configuration

Wireless@SGx can also be used on your laptop via SSA but need to input your Wireless@SG account credentials in your laptop. This is one-time and will get your laptop login automatically when there is network presence

Wireless@SG need to be registered and you will have a user name and password. Logging on will be via browser login with the credentials

For me, if Wireless@SGx fails, I will try Wireless@SG due to less login on the later network

Hope this helps

 

[Morugana]

x is secure connection

means u auto login when you config swee swee on your laptop

 

[Arandalo]

This link is good for wireless@sgx configuration. Can use SIM Login (no need to create wireless@sg account) for mobile phones. Works for any telco operator. For iPhone users, just download the profile from the website and auto connect.

https://www.imda.gov.sg/community/consumer-education/wireless-sg/support-and-feedback

IDA was restructured so the configuration links provided by the telcos were not updated and it took me a while to find.

 

[Sausage]

can anyone tell me the settings to use to connect to wireless sgx? I don't want to download installers.

I need to know if you use PEAP/TLS/etc or MSCHAPV2 or any certificates and things.

My phone keeps disconnecting after 2-3 seconds.

 

[ZrE0_Cha0s]

can anyone tell me the settings to use to connect to wireless sgx? I don't want to download installers.

I need to know if you use PEAP/TLS/etc or MSCHAPV2 or any certificates and things.

My phone keeps disconnecting after 2-3 seconds.

what device u using? cos from what I have tried is that I been forced to use sim setting instead of the previous setting( like what u want)

 

[xonix]

can anyone tell me the settings to use to connect to wireless sgx? I don't want to download installers.

I need to know if you use PEAP/TLS/etc or MSCHAPV2 or any certificates and things.

My phone keeps disconnecting after 2-3 seconds.

Sorry you can't. They have discontinued login via user name/password login for sgx.

Otherwise you can use the SIM authentication method or install the wireless sg app and config from there

 

[lohsenglte]

can anyone tell me the settings to use to connect to wireless sgx? I don't want to download installers.

I need to know if you use PEAP/TLS/etc or MSCHAPV2 or any certificates and things.

My phone keeps disconnecting after 2-3 seconds.

If you're using supported Android or Windows Phone device, just set it to EAP-SIM mode to login.

If you're on iOS, sorry, there's no way. You need to install the profile via IMDA website or through the Wireless@SG app

 

[magix]

If you're using supported Android or Windows Phone device, just set it to EAP-SIM mode to login.

If you're on iOS, sorry, there's no way. You need to install the profile via IMDA website or through the Wireless@SG app

yah Iphone need to install the profile to work.

 

[Sausage]

my other phones all can stillconnect to sgx using password, just that my new mi max cannot.

 

[Sausage]

anyway i tried setting my mi max to use eap-sim, same thing, disconnect after 2-3 seconds.