YouTube Build - NZXT H1

[hafiz116]

This is my next YouTube build, pictures below. Unboxing and build videos to follow in the coming days. The specs of the system are as follows: -

1. Motherboard - ASUS ROG STRIX X570 i-Gaming
2. CPU - AMD Ryzen 9 3950X
3. RAM - G.Skill TridentZ Neo 32Gb 3600mhz kit
4. Graphics Card - NVidia GTX 1070 Founders Edition
5. Storage - 2TB Sabrent Rocket NVMe 4.0
6. Casing - NZXT H1 (includes 650w PSU, 140mm AIO cooler)

My previous YouTube build can viewed at the thread below: -
https://forums.hardwarezone.com.sg/hardware-clinic-2/amd-ryzen-7-youtube-build-6359513-2.html

 

[Lil_d3viLz]

Nice desk there. Ikea table?

How much you get that 3950x and NVMe ssd for?

 

[hellspawn_one]

Is the 140mm aio enough for a 3950x?

Sent from Samsung SM-G970F using GAGT

 

[AnTiLooP]

Nice! By the way, are you building these as a side job or ?

 

[hafiz116]

Nice desk there. Ikea table?

How much you get that 3950x and NVMe ssd for?

This is not from IKEA but they do have similar looking desks.

The 3950X was purchased locally for $1,000+ while the NVMe was from Amazon and cost me $368 during one of their hiccups

 

[hafiz116]

Is the 140mm aio enough for a 3950x?

Sent from Samsung SM-G970F using GAGT

Thats what I intend on finding out. I intend on doing specific test to show that it's able to run well in our constantly hot climate.

I only just completed the build and on the default 1.3v its idling around 42 degrees

 

[hafiz116]

Nice! By the way, are you building these as a side job or ?

It's my interest and I would like to see if I can make something out of it. There are a few builds I have on hand (at least 3) but will need to sell them in order to turn over YouTube content,... Time will tell if I suppose

 

[AnTiLooP]

It's my interest and I would like to see if I can make something out of it. There are a few builds I have on hand (at least 3) but will need to sell them in order to turn over YouTube content,... Time will tell if I suppose

Good luck. Sounds interesting.

 

[m0n0n0ke]

er...what/
1070?

 

[hg2]

Nice clean setup! Watch about 10 videos when it was released during **.
Most focus on fast builds and clean design. That's the strength of this case...

 

[hg2]

er...what/
1070?

Don't Errr Ok....
There are people who recommending 1060 on another thread, and claim it can go for next 3yrs gaming on contemporary titles..... serious topic....no jokes... LoL

Stop pulling his leg lah! he's not Linus with 50 staffs on payrolls and warehouse full of parts to pick from... one look i know it's a place holders to show it can fit a full length GPU..... room for improvement is to get review hardware for free. Good work!

 

[Proximus]

This is my next YouTube build, pictures below. Unboxing and build videos to follow in the coming days. The specs of the system are as follows: -

1. Motherboard - ASUS ROG STRIX X570 i-Gaming
2. CPU - AMD Ryzen 9 3950X
3. RAM - G.Skill TridentZ Neo 32Gb 3600mhz kit
4. Graphics Card - NVidia GTX 1070 Founders Edition
5. Storage - 2TB Sabrent Rocket NVMe 4.0
6. Casing - NZXT H1 (includes 650w PSU, 140mm AIO cooler)

My previous YouTube build can viewed at the thread below: -
https://forums.hardwarezone.com.sg/hardware-clinic-2/amd-ryzen-7-youtube-build-6359513-2.html

Steady! Nice! Look forward to your video on these parts.

 

[KleoZy]

Steady! Nice! Look forward to your video on these parts.

I am parking at his channel ..

 

[ragnarok95]

Nice build there. Have you consider the new razer white pro click mouse??

 

[hafiz116]

er...what/
1070?

Wait for the YouTube video for more details. But since you asked,.. The GTX 1070 serves as a temproray solution but I do have a 2080Ti.

This is a 2.75 slot Gigabyte 2080 Ti Aorus Xtreme card which does not fit due to the thickness. I am waiting on the next gen NVidia (due to be announced in the next week or so) and if there is a 2 slot card then I will be dropping one into the build - this may not happen as the initial reports/rumours suggest that its a 3 slot card!

 

[Calvin.Lee]

Will be waiting for the local review of the NZXT H1 case performance under local climate.

But if AMD 3950X idle temp is around 40C at 1.3v.

The H1 shows it can fit a full length GPU but as some mentioned the issue will be the width of the GPU.

I will be very interested in both the CPU and GPU temps once they are at full load in the case....

Nice camera works!

 

[Charlie_Zhan]

this may not happen as the initial reports/rumours suggest that its a 3 slot card!

that is referring to the rtx 3090 that has 3 slots and 3x 8pin power connector.

 

[hafiz116]

that is referring to the rtx 3090 that has 3 slots and 3x 8pin power connector.

Yeah,.. I hope they don't do all the next gen cards that fat!

 

[origamii]

I am parking at his channel ..

same parking at his channel

 

[hafiz116]

NZXT H1 unboxing,...